Microchip Technology

SY88943VKG - 2.5Gbps PECL Limiting Post Amplifier | Microchip

料号: SY88943VKG ✓ 量产中
3.3 V to 5 V Vdss 10-MSOP, 10-TFSOP, 3.00 mm width Package
最小起订量: 1 |

SY88943VKG 概述

The Microchip Technology SY88943VKG is a single-channel limiting postamplifier for optical receiver systems, operating from a 3.3 V to 5 V supply and supporting data rates up to 2.5 Gbps in a 10-pin MSOP package. It can amplify input signals as small as 5 mVp-p into signals capable of driving PECL inputs.

A limiting postamplifier belongs to the high-speed amplifier family, where a linear amplifier, comparator, or limiting amplifier processes signals after a photodiode or other receiver front end converts light into an electrical waveform. In optical networking, the limiting postamplifier restores signal amplitude while reducing sensitivity to noise and amplitude variation. Its output stage then prepares the recovered logic signal for a clock-and-data-recovery circuit, serializer, or other digital logic device.

The SY88943VKG combines high gain with wide bandwidth to support 2.5 Gbps data rates. Its limiting function cleans up the recovered signal by driving the output toward stable logic levels, while the 5 mVp-p input sensitivity allows the device to work with weak signals at the output of a receiver front end. Operation from 3.3 V to 5 V supports both 3.3 V and 5 V system architectures commonly encountered in optical transceiver designs.

The device is offered in a compact 10-MSOP surface-mount package suitable for high-density transceiver boards. Its small footprint helps designers place the postamplifier close to the photodiode or transimpedance amplifier, reducing the length of sensitive high-speed interconnects. Because the package exposes ten pins and includes an exposed pad arrangement, assembly layouts should follow the land pattern and thermal recommendations shown in the Microchip product documentation.

Typical uses include 2.5 Gbps fiber-optic receivers, PON and other optical-network transceivers, parallel optical links, and clock-recovery front ends. The device is particularly relevant where a recovered signal is too small to drive downstream digital logic directly and requires gain, limiting, and PECL-compatible output swing.

When designing around this postamplifier, verify the receiver front end's output amplitude and noise before fixing the gain of the system. Keep the photodiode, transimpedance amplifier, and postamplifier on the same high-speed signal path, and provide a low-inductance return path beneath the circuit. Confirm that the downstream device accepts the voltage levels and interface standard produced by the amplifier.

This page organizes the key operating limits, interface characteristics, package information, and application guidance for engineers evaluating the SY88943VKG. It also identifies the orderable package variant, supports direct product-page navigation to related Microchip devices, and consolidates practical design guidance that would otherwise require reading across multiple technical documents.

直接替换替代料: SY88943VKG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: SY88943VKG (相同外形与封装尺寸) ——差异在于 Maximum Data Rate, Output Interface, Package, Product Type.

Microchip Technology
Maximum Data Rate: 3.2 Gbps
Output Interface: CML
Package: 10-MSOP
对比 SY88943VKG →

SY88943VKG-TR

✅ 直接替换
📦 10-MSOP
Same SY88943V electrical device and 10-MSOP footprint; orderable packing code differs from SY88943VKG, while data rate, supply range, input sensitivity, and PECL interface remain identical

📋 参考替代料(不在目录中)

SY88943VKG 最大额定值与电气特性

Product Type Limiting postamplifier
Channel Count 1 channel
Maximum Data Rate 2.5 Gbps
Supply Voltage Range 3.3 V to 5 V
Minimum Input Signal 5 mVp-p
Output Interface PECL
封装 10-MSOP, 10-TFSOP, 3.00 mm width
安装类型 Surface mount

SY88943VKG 10-msop, 10-tfsop, 3.00 mm width 引脚配置指南

SY88943VKG(10-msop, 10-tfsop, 3.00 mm width 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

SY88943VKG 的 10-msop, 10-tfsop, 3.00 mm width 封装引脚图

暂无详细引脚数据: SY88943VKG.

请参阅 数据手册 以查看完整引脚配置。

典型应用

SY88943VKG 适用于 6 应用s: 2.5 Gbps Fiber-Optic Receiver, PON Optical Transceiver Front End, Parallel Optical Link Receiver, Clock-and-Data-Recovery Input Conditioning, High-Speed Transceiver Signal Recovery, Photodiode Receiver Signal Conditioning.

🌐

2.5 Gbps Fiber-Optic Receiver

The SY88943VKG fits the signal-conditioning stage between an optical receiver front end and a clock-and-data-recovery circuit in a 2.5 Gbps link. Its high gain and wide bandwidth operate on recovered signals as small as 5 mVp-p, while the limiting action produces logic-level output suitable for driving downstream circuitry. Placing the amplifier close to the transimpedance amplifier minimizes the sensitive trace length. The 3.3 V to 5 V supply range supports either system rail, but the complete data path must be checked for noise margin, return-path continuity, and PECL compatibility.

🖥️

PON Optical Transceiver Front End

In a PON transceiver, the SY88943VKG can condition the electrical signal recovered from the incoming optical burst before it reaches the CDR or decision circuitry. The 5 mVp-p input capability provides margin for a weak received signal, and the 2.5 Gbps rating suits multi-gigabit passive optical network designs. Its limiting behavior helps convert a noisy analog waveform into a repeatable digital decision. Designers should budget amplifier gain for the actual photodiode and transimpedance response rather than adding unnecessary gain that could increase noise.

⚡

Parallel Optical Link Receiver

The SY88943VKG is applicable to parallel optical receivers that recover several low-amplitude data lanes at multi-gigabit rates. Each recovered lane can use a dedicated postamplifier to add gain and limit the waveform before it enters multiplexing or clock-recovery circuitry. Its 10-MSOP package supports compact transceiver layouts, while the 2.5 Gbps performance supports 2.5G-class links. Placement, bypass capacitance, and thermal management of the exposed pad should follow the manufacturer layout guidance to preserve edge rate and minimize crosstalk between adjacent lanes.

⏱️

Clock-and-Data-Recovery Input Conditioning

A clock-and-data-recovery circuit generally requires a clean, limited input before it can make reliable phase and data decisions. The SY88943VKG can provide that conditioning by amplifying a weak recovered signal and driving it toward stable logic levels. Its high gain, wide bandwidth, and 2.5 Gbps capability make it suitable for the recovered-data path immediately ahead of a CDR. Because excess gain can amplify front-end noise, the receiver chain should be evaluated as a complete signal path, including input amplitude, noise, clock quality, and the expected signal degradation over the optical link.

📡

High-Speed Transceiver Signal Recovery

In a high-speed transceiver module, the SY88943VKG can serve as the limiting stage that restores amplitude after the photodiode and transimpedance amplifier have converted the optical signal into an electrical waveform. The device handles inputs from 5 mVp-p and is optimized for data rates up to 2.5 Gbps, allowing the downstream serializer or logic device to receive a more stable signal. Its 3.3 V to 5 V operating range supports mixed-voltage transceiver architectures. Supply decoupling and the exposed-pad thermal path should be designed together to maintain stable performance at the highest intended data rate.

🔧

Photodiode Receiver Signal Conditioning

The SY88943VKG is appropriate when a photodiode receiver produces a signal that requires gain and limiting before it can drive a logic input. Its 5 mVp-p input capability supports weak recovered waveforms, while its high-gain, wide-bandwidth design targets communication rates up to 2.5 Gbps. The amplifier should be placed close to the receiver output to avoid degrading the high-speed signal over a long trace. Use a continuous ground plane, short supply bypass connections, and the recommended exposed-pad land pattern to achieve stable operation and reduce radiated or conducted emissions.

What is the SY88943VKG used for?
The SY88943VKG is a single-channel limiting postamplifier used in high-speed optical receiver circuits. According to the Microchip SY88943V product page, it supports data rates up to 2.5 Gbps and amplifies signals as small as 5 mVp-p into signals capable of driving PECL inputs. It is placed after the photodiode or transimpedance amplifier when the recovered signal needs additional gain and limiting before reaching clock-and-data-recovery or digital logic circuitry.
What is the maximum data rate of the SY88943VKG?
The SY88943VKG supports data rates up to 2.5 Gbps. Microchip identifies the device as a limiting postamplifier with high gain and wide bandwidth for fiber-optic receiver applications. This rate makes it applicable to 2.5G optical links, PON equipment, transceivers, and recovered-data paths that operate below the device's maximum signaling rate. The complete operating conditions and test conditions should be taken from the manufacturer datasheet.
What supply voltage does the SY88943VKG require?
The SY88943VKG operates from a 3.3 V to 5 V supply. The 3.3 V and 5 V limits are identified in the Microchip product description and product listings for the device. This range allows the amplifier to be used in systems built around either supply rail, although the core and I/O voltage configuration must remain inside the manufacturer's specified operating limits and the unused supply pins must be connected as directed.
How small a signal can the SY88943VKG amplify?
The SY88943VKG can amplify input signals as small as 5 mVp-p. The Microchip SY88943V product page specifically identifies 5 mVp-p as the minimum signal level that can be amplified for PECL drive. This sensitivity is useful immediately after a receiver front end when the recovered waveform is weak, but the complete front end must still provide adequate noise margin and the downstream device must support the resulting PECL interface.
Where can I download the SY88943VKG datasheet PDF?
The official SY88943V product page on Microchip's website provides access to the manufacturer's technical documentation for the device. The product family is identified as SY88943V, while SY88943VKG is the 10-MSOP orderable configuration. Use the documentation linked from that product page for the pin-description table, recommended application circuit, absolute maximum ratings, and electrical characteristics. A distributor-hosted datasheet listing is also indexed under the full ordering code.
Where can I find the SY88943VKG pinout?
The SY88943VKG pinout is defined for the 10-pin MSOP configuration in the Microchip SY88943V documentation. Because the exposed-pad and power-supply assignments are safety-critical, use the manufacturer pin-description table rather than assigning signals from a generic amplifier drawing. The ten-pin package includes signal connections, supply rails, ground references, and an exposed thermal pad whose connection should follow the recommended land pattern.
Is the SY88943VKG a drop-in replacement for SY88943VKG-TR?
The SY88943VKG and SY88943VKG-TR identify the same SY88943V device family in the same 10-MSOP footprint, but their orderable packing codes differ. The suffix difference determines the delivery format, while the electrical device and board footprint remain the same. Check the manufacturer's packing-code definitions before substituting one ordering code for the other, and verify the assembly process can handle the specified format.
What can replace the SY88943VKG in a fiber-optic receiver?
A replacement should provide the same 10-MSOP land pattern, a 3.3 V to 5 V supply range, PECL-compatible output, input sensitivity of 5 mVp-p or better, and gain and bandwidth suitable for 2.5 Gbps operation. The orderable SY88943VKG-TR variant uses the same device family and package, but it differs in packing format. Microchip's cross-reference search is the appropriate starting point for additional comparable devices from other manufacturers.
When should I choose the SY88943VKG over a general-purpose amplifier?
Choose the SY88943VKG when the receiver requires a dedicated postamplifier for a recovered optical signal operating up to 2.5 Gbps. Unlike a general-purpose amplifier, this device combines high gain, wide bandwidth, limiting behavior, and PECL-compatible drive in one function. It is a better fit when the input can be as small as 5 mVp-p and the downstream circuit expects stable digital levels rather than a linear analog waveform.
Is the SY88943VKG suitable for PON and optical-network transceivers?
Yes, the SY88943VKG is suitable for PON and other optical-network receiver paths. Microchip describes the device as a limiting postamplifier for fiber-optic receivers, and its 2.5 Gbps capability and 5 mVp-p input sensitivity match recovered-signal conditioning requirements in multi-gigabit optical links. The receiver architecture, target data rate, noise margin, and PECL voltage levels must still be verified against the complete system design.
What is the best Microchip equivalent for the SY88943VKG?
The closest listed Microchip ordering option is SY88943VKG-TR, which uses the same SY88943V device and 10-MSOP footprint but carries a different packing code. For a second-source device from another manufacturer, there is no verified cross-reference part identified for this page. Microchip's cross-reference search accepts competitor and Microchip part numbers and should be used to check pin, voltage, gain, bandwidth, and interface compatibility before approving a substitution.
Where can I buy the SY88943VKG online?
Use the Request a Quote form on this page to request the current unit price, stock position, minimum order quantity, and lead time for the SY88943VKG. The form is the direct purchasing channel for this listing and returns a quotation based on the requested quantity and delivery plan. Confirm whether the required packing format is the VKG ordering code or the VKG-TR orderable variant before placing the order.
What is the current price of the SY88943VKG?
The current commercial terms for the SY88943VKG are provided through the Request a Quote form on this page. Enter the required quantity, packing preference, and target delivery date to obtain a current quotation and availability confirmation. Pricing and stock can change by quantity, packaging, and market conditions, so use the form rather than relying on a historical listing amount when preparing a purchase order.
What is the lead time and stock status for the SY88943VKG?
Current lead time, stock status, and minimum order quantity should be requested through the Request a Quote form on this page. The form is linked directly to the SY88943VKG listing and allows the purchasing team to confirm the exact ordering code and delivery schedule. For production planning, also verify whether your assembly process requires the VKG packing configuration or the VKG-TR orderable format.
How should the SY88943VKG be placed near a photodiode amplifier?
Place the SY88943VKG close to the output of the photodiode or transimpedance amplifier so that the sensitive high-speed node remains short. Provide a continuous ground reference, avoid routing the signal over splits in the ground plane, and follow the manufacturer land pattern for the exposed pad. The 2.5 Gbps capability makes trace length, return-path continuity, and supply decoupling important to preserving signal integrity.
What are the key specifications of the SY88943VKG that engineers should know?
The key SY88943VKG specifications are a 2.5 Gbps maximum data rate, a 3.3 V to 5 V supply range, 5 mVp-p minimum input signal capability, PECL output drive, and a 10-MSOP surface-mount package. According to the Microchip SY88943V product page, the device combines high gain and wide bandwidth in a limiting postamplifier intended for fiber-optic receivers. Its primary design role is to recover and condition weak logic signals before clock-and-data-recovery circuitry.

工程参考数据: SY88943VKG ——对比、设计指导和合规信息。

选型指南

Choose the SY88943VKG when designing a 2.5 Gbps optical receiver that needs dedicated gain, limiting, and PECL-compatible drive from a signal as small as 5 mVp-p. Its 3.3 V to 5 V supply range supports both 3.3 V and 5 V transceiver architectures, and the 10-MSOP package allows placement close to the receiver front end. SY88943VKG-TR is the closest ordering option for the same electrical device and footprint when its packing configuration matches the assembly process. Neither ordering code should be treated as an electrical upgrade. For a second source from another manufacturer, verify pin assignments, supply voltage, input sensitivity, gain, bandwidth, output swing, and common-mode levels against the complete receiver design before approving a substitution.

与替代料对比

参数 本产品 SY88943VKG-TR
Package 10-MSOP 10-MSOP
Brand Microchip Technology Microchip Technology
Product Type Limiting postamplifier Limiting postamplifier
Maximum Data Rate 2.5 Gbps 2.5 Gbps
Supply Voltage Range 3.3 V to 5 V 3.3 V to 5 V
Minimum Input Signal 5 mVp-p 5 mVp-p
Output Interface PECL PECL
Orderable Packing Code VKG VKG-TR
Mounting Type Surface mount Surface mount

关键差异点

  • Dedicated optical-receiver postamplifier function (对比 SY88943VKG-TR)
  • Weak-signal recovery capability (对比 SY88943VKG-TR)
  • Compact high-speed transceiver integration (对比 SY88943VKG-TR)

设计说明

Place the SY88943VKG immediately after the transimpedance amplifier and keep the recovered-signal trace short and continuous. At rates up to 2.5 Gbps, trace discontinuities, series impedance mismatches, and return-path gaps can degrade the limiting action. Route over an uninterrupted ground plane, avoid stubs and test pads on the high-speed node, and apply the manufacturer's pin and layout guidance when defining the land pattern.

Decouple the supply pins close to the device and follow the manufacturer guidance for capacitance, placement, and via connections. A stable 3.3 V or 5 V rail is essential because supply disturbance can reduce margin on the small 5 mVp-p input signal and shift the recovered logic levels. Avoid sharing long supply paths with switching stages that inject wideband noise into the postamplifier and clock-and-data-recovery section.

The 10-MSOP construction includes an exposed pad, so the land pattern should provide the recommended thermal-via arrangement and adequate copper connection. Keep the pad free of unintended solder bridges and verify assembly against the manufacturer land pattern. Provide uninterrupted copper beneath the package and avoid placing the amplifier next to a heat source when the board experiences elevated temperature. This supports stable gain, bandwidth, and limiting performance at the intended operating rate.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The SY88943VKG is a commercial fiber-optic receiver amplifier. RoHS and REACH status, lead-free construction, halogen-free declaration, and conflict-minerals reporting require confirmation from the manufacturer or the current product documentation.

数据核验日期: 2026-11-20 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

SY88943VKG datasheet SY88943VKG datasheet pdf SY88943VKG pinout SY88943VKG specifications Microchip SY88943VKG SY88943VKG price SY88943VKG stock SY88943VKG equivalent SY88943VKG replacement SY88943VKG cross reference SY88943VKG 10-MSOP SY88943VKG optical receiver SY88943VKG 2.5Gbps PECL amplifier SY88943VKG vs SY88943VKG-TR

相关元器件 & 术语

Microchip Technology SY88943VKG SY88943VKG-TR SY88943V limiting postamplifier limiting amplifier high-speed amplifier analog amplifier fiber-optic receiver optical receiver optical network PON PECL 2.5 Gbps 5 mVp-p 3.3 V power supply 5 V power supply 10-MSOP surface mount SMD package clock-and-data recovery transimpedance amplifier photodiode signal integrity exposed pad
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情