Microchip Technology

SY89532LHH - 500MHz Clock Synthesizer | Microchip

料号: SY89532LHH ✓ 量产中
3.3 V Vdss LVPECL and LVDS Speed
最小起订量: 1 |

SY89532LHH 概述

The Microchip Technology SY89532LHH is a 3.3 V precision programmable bus clock synthesizer covering 33 MHz to 500 MHz and supporting LVPECL and LVDS clock outputs in a 64-pin package. It combines a synthesizer, fanout buffers, clock drivers, and a translator in one device, with specified jitter below 50 ps.

A programmable clock synthesizer is a clock-and-timing IC that generates or distributes a controlled reference frequency for systems requiring deterministic timing. It belongs to the clock generator and PLL family within the broader clock and timing IC hierarchy. The SY89532LHH is intended for systems that need both synthesis and multi-output distribution while supporting two common high-speed differential clock-logic standards.

The device operates from a 3.3 V power supply with a tolerance of ±10%. Its programmable operating range extends from 33 MHz to 500 MHz, allowing the same circuit to serve multiple clocking requirements. LVPECL and LVDS outputs provide flexible termination and interface choices for high-speed backplanes, communications equipment, clock-distribution boards, and test systems. The integrated synthesizer, fanout buffers, clock drivers, and translator reduce the number of separate timing components required.

A key performance specification is jitter below 50 ps, which supports precise edge placement in demanding digital systems. Combined with the broad 33 MHz to 500 MHz operating range, this jitter performance makes the SY89532LHH useful where clock distribution and signal integrity are both important. The 64-pin package provides connections for configuration, reference input, clock outputs, power, and ground according to the manufacturer's device documentation.

Typical applications include high-speed serial-interface clock distribution, communications backplanes, network and switching equipment, FPGA or ASIC clock trees, and instrumentation requiring several LVPECL or LVDS clock sources. In these systems, the device can establish a common low-jitter timing reference and distribute it to multiple destinations without requiring separate output-driver ICs.

When designing around the SY89532LHH, preserve the high-speed return path by using a controlled-impedance multilayer PCB and place decoupling capacitors close to the supply pins. Differential routing should maintain consistent pair geometry and termination, while unused outputs should be handled according to the manufacturer's recommended output configuration. Confirm the programmed frequency, output type, and termination scheme before releasing the PCB.

This product record combines the device's operating limits, supported clock standards, package information, sourcing structure, and application guidance with practical comparison and design notes. It helps engineers evaluate the SY89532LHH for precision clock-tree designs while clearly separating confirmed specifications from information requiring additional engineering confirmation.

直接替换替代料: SY89532LHH ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

SY89532LHH 规格参数

Product Type Programmable bus clock synthesizer
Supported Clock Logic LVPECL and LVDS
电源电压 3.3 V
Supply Voltage Tolerance ±10%
Operating Frequency Range 33 MHz to 500 MHz
Jitter <50 ps
Integrated Functions Synthesizer, fanout buffers, clock drivers, and translator
引脚数量 64 pins
Device Classification Clock synthesizer / jitter cleaner

SY89532LHH standard 引脚配置指南

SY89532LHH(standard 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

SY89532LHH 的 standard 封装引脚图

暂无详细引脚数据: SY89532LHH.

请参阅 数据手册 以查看完整引脚配置。

典型应用

SY89532LHH 适用于 6 应用s: High-Speed Communications Backplane, FPGA and ASIC Clock Trees, Network and Switching Equipment, Test and Measurement Instrumentation, Industrial Data Acquisition, RF Communications Clocking.

🌐

High-Speed Communications Backplane

The SY89532LHH fits communications backplanes requiring a common low-jitter clock distributed to multiple high-speed destinations. Its programmable range of 33 MHz to 500 MHz supports several clock domains, while LVPECL and LVDS outputs provide interface flexibility. The device integrates synthesis, fanout, clock drivers, and translation functions, reducing the number of separate timing components. A key implementation consideration is preserving signal integrity with a continuous return path, controlled-impedance differential routing, and output-termination networks selected for LVPECL or LVDS operation.

🖥️

FPGA and ASIC Clock Trees

The SY89532LHH is suitable for centralizing a programmable reference clock in an FPGA or ASIC clock tree. Its 33 MHz to 500 MHz range accommodates many high-speed interface and fabric requirements, while jitter below 50 ps supports consistent edge placement. Integrated fanout and driver functions allow the design to distribute the synthesized clock without separate generic buffer stages. Board designers should route each differential pair consistently, avoid stubs, and place termination close to the receiving device to minimize reflections and edge degradation.

🌐

Network and Switching Equipment

The SY89532LHH can serve as a programmable timing source in network and switching equipment where several serialized links require related clocks. Supporting both LVPECL and LVDS allows clock-output interfaces to be matched to different sections of the design, while the integrated translator function reduces the need for separate interface circuitry. Its jitter below 50 ps is useful for maintaining timing margin at higher data rates. The implementation should include a continuous ground reference under every high-speed pair and careful control of supply-return current to reduce common-mode noise.

🔧

Test and Measurement Instrumentation

The SY89532LHH is appropriate for precision instrumentation that generates and distributes clocks to acquisition, conversion, or analysis circuits. Programmable operation across 33 MHz to 500 MHz permits one device to support multiple internal test modes, and LVPECL or LVDS can interface with high-speed measurement channels. The integrated fanout, driver, and translation functions simplify synchronization across multiple clock destinations. For repeatable measurements, keep clock traces short, use stable references, and verify termination and output amplitude against the manufacturer's electrical-characteristics tables.

🏭

Industrial Data Acquisition

The SY89532LHH can provide a programmable, low-jitter clock for industrial data-acquisition systems requiring synchronized sampling and communication links. Its 3.3 V ±10% supply supports integration with conventional 3.3 V digital systems, and the 64-pin package supports multiple configuration and output connections. At 33 MHz to 500 MHz, it covers a useful range of converter, serial-interface, and processing-clock requirements. Engineers should isolate noisy switching nodes from the clock network and provide uninterrupted reference planes beneath differential pairs.

📡

RF Communications Clocking

The SY89532LHH is useful in RF communications equipment as a low-jitter clock source for synthesizer, converter, and digital baseband subsystems. Its 33 MHz to 500 MHz programming range supports multiple reference-clock plans, while LVPECL and LVDS outputs enable distribution across mixed logic interfaces. Specified jitter below 50 ps supports timing confidence in sensitive signal chains. The device should be placed away from high-energy RF paths, and its supply reference must be kept low impedance to avoid converting switching or coupling noise into clock jitter.

What is the operating frequency range of the SY89532LHH?
The SY89532LHH operates from 33 MHz to 500 MHz. This broad programmable range allows the clock synthesizer to support multiple high-speed digital functions while using the same 3.3 V device. The operating-frequency limits are identified in the Microchip SY89532LHH datasheet and its associated product documentation.
Which clock output standards does the SY89532LHH support?
The SY89532LHH supports LVPECL and LVDS differential outputs. These two standards provide design options for high-speed clock distribution, although their termination and interface requirements differ. The supported output types are explicitly listed in the Microchip SY89532LHH datasheet.
What is the supply voltage of the SY89532LHH?
The SY89532LHH uses a nominal 3.3 V supply with a tolerance of ±10%. This operating range corresponds to approximately 2.97 V through 3.63 V. The power-supply specification should be checked against the absolute maximum and operating limits in the manufacturer's datasheet when designing the rail.
What jitter performance does the SY89532LHH provide?
The SY89532LHH provides jitter below 50 ps. Low jitter is important when a synthesized clock must preserve dependable edge timing across high-speed data paths. The stated jitter figure comes from the device description in the Microchip SY89532LHH documentation and should be correlated with the test conditions used in the datasheet.
What functions are integrated into the SY89532LHH?
The SY89532LHH integrates a synthesizer, fanout buffers, clock drivers, and a translator in one 64-pin device. This integration allows one component to generate a reference frequency and distribute supported clock outputs. The exact buffer and output-channel count should be confirmed from the pin-description table in the manufacturer's datasheet.
Where can I download the SY89532LHH datasheet PDF?
The SY89532LHH datasheet PDF is available from the linked datasheet document on this page, and additional product information appears on the Microchip cross-reference and distributor product pages. Use the manufacturer's pin-description and electrical-characteristics tables for final design release because the PDF copy may be hosted by a distributor.
Where can I find the SY89532LHH pinout?
Use the pin-description table in the SY89532LHH datasheet to find the authoritative 64-pin assignment, including power, ground, configuration, reference, and differential clock-output connections. A package-specific pin diagram is not published in the product summary, so engineers should map the schematic directly to the manufacturer pin table.
Is the SY89532LHH suitable for a low-jitter FPGA clock tree?
The SY89532LHH is suitable for FPGA clock distribution when the design operates within its 33 MHz to 500 MHz range and uses supported LVPECL or LVDS interfaces. Its specified jitter below 50 ps and integrated fanout functions support centralized clock distribution. Board-level return-path and differential-pair design remain critical to realized signal integrity.
What is the difference between the SY89532LHH and the SY89532LHH-TR?
The SY89532LHH-TR designation identifies a tape-and-reel ordering variant associated with the same SY89532LHH device family, while the base MPN is the catalog part number used in this record. The -TR suffix should not be interpreted as a different functional grade without consulting the manufacturer ordering information. Use the exact suffix required by the assembly package.
What is the best drop-in replacement for the SY89532LHH?
No independently verified drop-in replacement for the SY89532LHH was identified in the available cross-reference results. A valid replacement must preserve the 64-pin footprint, configuration interface, frequency range, LVPECL and LVDS output behavior, supply requirements, and jitter behavior. Request a manufacturer-assisted comparison before treating any candidate as pin-to-pin compatible.
What can replace the SY89532LHH in an existing design?
A direct replacement cannot be confirmed from the available technical records because no candidate was established as pin-to-pin and parametrically compatible. Before substituting a device, compare its 64-pin assignments, programmable-frequency limits, output standards, supply voltage, reference requirements, and termination scheme. PCB changes or signal-interface adaptations make a part unsuitable as a drop-in replacement.
SY89532LHH vs SY89532LHH-TR: which part number should be selected?
Select the SY89532LHH when that is the exact catalog MPN required by the BOM, and select the SY89532LHH-TR when the approved assembly format is tape-and-reel. The available product records identify both notations, but they do not provide enough ordering detail to describe them as functionally different devices. Confirm the required shipping format with the manufacturer or purchasing team.
When should I choose the SY89532LHH over a generic clock generator?
Choose the SY89532LHH when the design needs programmable operation from 33 MHz to 500 MHz, LVPECL and LVDS outputs, and integrated fanout, driver, and translation functions. A generic clock generator may be preferable when only one basic output is required. The SY89532LHH offers value through integration, but its 64-pin implementation requires careful high-speed board layout.
Where can I buy the SY89532LHH and check current lead time?
Use the Request a Quote form on this page to ask for current availability, unit price, minimum order quantity, and lead time for the exact SY89532LHH ordering configuration. Current commercial terms can vary by order quantity and packaging, so request a written quotation for the quantity and suffix needed by the production build.
Is the SY89532LHH in stock?
Current stock should be confirmed through the Request a Quote form on this page using the exact SY89532LHH MPN and required shipment format. Real-time distributor search results confirm that the part is actively offered, but they do not provide a dependable quantity-level stock commitment. Treat any allocation as subject to the quotation and manufacturing schedule.
What are the key specifications of the SY89532LHH that engineers should know?
The essential specifications are a 3.3 V ±10% supply, a 33 MHz to 500 MHz operating range, LVPECL and LVDS output support, jitter below 50 ps, and a 64-pin package. The device integrates synthesis, fanout, clock driving, and translation functions. These parameters place it among precision programmable bus clock synthesizers for communications and digital clock-distribution systems.

工程参考数据: SY89532LHH ——对比、设计指导和合规信息。

选型指南

Choose the SY89532LHH when a design requires a programmable clock source operating between 33 MHz and 500 MHz and needs LVPECL or LVDS distribution from a single IC. Its integrated synthesizer, fanout buffers, clock drivers, and translator are particularly useful when minimizing the number of clock-path components is important. The part is less attractive for designs needing only one low-speed clock or a simple oscillator output because those applications can use a more compact generator. No drop-in substitute was confirmed, so keep the 64-pin footprint and validate configuration, output, reference, termination, and sequencing requirements before changing the BOM.

与替代料对比

参数 本产品
Brand Microchip Technology
Package 64-pin package
Supply Voltage 3.3 V ±10%
Operating Frequency Range 33 MHz to 500 MHz
Clock Output Standards LVPECL and LVDS
Jitter <50 ps
Integrated Functions Synthesizer, fanout buffers, clock drivers, and translator
Device Classification Programmable bus clock synthesizer / jitter cleaner

关键差异点

  • Broad programmable operating range (对比 No verified drop-in alternative)
  • Dual high-speed differential clock standards (对比 No verified drop-in alternative)
  • Integrated clock-tree functions (对比 No verified drop-in alternative)
  • Low-jitter operation (对比 No verified drop-in alternative)

设计说明

Route LVPECL and LVDS outputs as controlled-impedance differential pairs with constant separation and uninterrupted reference planes. Avoid test pads, vias, and branches that introduce impedance discontinuities. Place output termination according to the selected logic standard and receiver topology, and keep the clock network isolated from switching-power and RF paths to minimize edge degradation.

Place the 3.3 V decoupling network close to the device's supply and ground connections, using short current paths and a solid ground reference. High-frequency bypass capacitance should be placed at the regulator-to-load transition point and arranged to minimize loop area. Verify the manufacturer's recommended capacitor values and layout in the SY89532LHH datasheet before fabrication.

Do not treat a clock synthesizer as a general-purpose output buffer or assume every 64-pin clock generator has the same configuration interface. Before replacement, compare pin assignments, reference-input requirements, programmable-frequency limits, output standards, supply sequencing, and termination requirements. A package-compatible appearance alone is insufficient to establish drop-in compatibility.

Keep the 3.3 V rail within the stated ±10% operating tolerance and isolate the clock device from noisy switching stages with appropriate filtering or a separate quiet supply branch. For multi-rail equipment, define power-up and power-down behavior so that clock outputs do not begin driving before receiving circuitry is operational. Confirm sequencing requirements in the manufacturer's electrical specifications.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance status was not stated in the manufacturer or distributor summary information available for this record.

数据核验日期: 2026-11-16 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

SY89532LHH datasheet SY89532LHH datasheet pdf SY89532LHH pinout SY89532LHH equivalent SY89532LHH replacement SY89532LHH cross reference SY89532LHH footprint SY89532LHH price SY89532LHH stock Microchip SY89532LHH SY89532LHH LVPECL LVDS SY89532LHH 500MHz clock synthesizer

相关元器件 & 术语

Microchip Technology SY89532LHH SY89532LHH-TR programmable bus clock synthesizer clock synthesizer PLL clock and timing IC clock generator jitter cleaner LVPECL LVDS differential clock output fanout buffer clock driver frequency translation 33 MHz 500 MHz 3.3 V supply jitter below 50 ps 64-pin package FPGA clock tree communications backplane industrial data acquisition RF communications
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情