SY89538LHG - 756MHz Zero-Delay Clock Synthesizer | Microchip
料号: SY89538LHG ✓ 量产中SY89538LHG 概述
A clock synthesizer and fanout buffer is a timing IC that generates or distributes one or more related clock signals while controlling frequency, phase, voltage standards, and output-bank configuration. The PLL allows an external reference or crystal to establish a stable internal clock, while the fanout section routes multiple outputs to demanding digital, communications, and data-conversion systems. Within the timing hierarchy, the SY89538LHG is a clock generator, PLL-based synthesizer, and fanout buffer within the broader clock and timing IC category.
Five independently programmable output banks are the central functional feature of the SY89538LHG. This arrangement reduces the number of discrete clock buffers required when several destinations need related but independently controlled clocks. The device accepts CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL inputs and produces LVDS or LVPECL outputs. Logic-level translation broadens its usefulness in mixed-signal, networking, processor, storage, and test systems.
The zero-delay architecture places the device within deterministic clock-distribution designs where minimizing added latency and part-to-part skew is important. The manufacturer datasheet describes five independent output banks and emphasizes reduced additive jitter and skew compared with discrete clock networks. A 756 MHz maximum frequency supports high-speed interfaces and digital subsystems, while the common 3.3 V operating range simplifies power architecture. The exposed thermal pad provides a direct path for heat removal from the PLL and output circuitry.
Typical uses include network-interface clock distribution, processor and serializer reference clocks, parallel data converters, test-and-measurement equipment, and industrial control systems. In a communications chassis, one reference can feed several independently programmed LVPECL or LVDS banks, reducing clock-tree complexity. The device can also translate supported input standards into output standards required by multiple logic domains.
PCB implementation requires careful treatment of the exposed pad, supply decoupling, and high-speed clock routing. Place the input, output, and bypass components close to their associated pins, provide a continuous ground reference beneath the package, and follow the manufacturer pin-description table when assigning tracks. Differential clock routing should use matched geometry and controlled impedance, while unused outputs require the termination configuration specified by the manufacturer datasheet.
This page consolidates the SY89538LHG device identity, timing functionality, supported logic levels, package information, selection guidance, and engineering design notes. It is intended to help designers determine whether the 64-pin zero-delay architecture fits a clock-distribution requirement before completing schematic, layout, and signal-integrity validation.
直接替换替代料: SY89538LHG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: SY89538LHG (相同外形与封装尺寸) ——差异在于 Device Type, Mounting Type, Package.
SY89538LHY
✅ 直接替换📋 参考替代料(不在目录中)
SY89538LHZ
✅ 直接替换📋 参考替代料(不在目录中)
SY89538LHH
✅ 直接替换联系询价
查看数据手册 →SY89538LHG 规格参数
| Device Type | Clock synthesizer and fanout buffer |
| 最大时钟频率 | 756 MHz |
| Supply Voltage Range | 2.375 V to 3.6 V |
| PLL | Yes |
| Programmable Output Banks | 5 independent banks |
| Supported Input Standards | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL |
| Supported Output Standards | LVDS and LVPECL |
| Zero-Delay Operation | Yes |
| 封装 | 64-pin TQFP with exposed pad |
| 安装类型 | Surface mount |
| Package Shipping Form | Tray |
| Logic-Level Translation | LVPECL and LVDS |
SY89538LHG tray 引脚配置指南
SY89538LHG(tray 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: SY89538LHG.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SY89538LHG 适用于 6 应用s: Network Interface Clock Distribution, Processor and Serializer Reference Clocks, Parallel ADC and DAC Clocking, Industrial Control and Data Acquisition, Test and Measurement Equipment, Storage and High-Speed Backplane Clocks.
Network Interface Clock Distribution
The SY89538LHG fits network-interface and line-card clock trees requiring several related outputs from one reference. Its 756 MHz maximum rating, integrated PLL, and five independently programmable output banks support multiple clock destinations without assembling a large bank of discrete buffers. LVDS and LVPECL outputs allow the same device to feed different logic domains, while supported input standards simplify interfacing with upstream CMOS, HSTL, LVTTL, SSTL, LVPECL, or LVDS sources. The design must select valid PLL ratios and confirm that the source reference remains within the manufacturer-specified input range.
推荐
Processor and Serializer Reference Clocks
The SY89538LHG is appropriate for distributing reference and forwarding clocks to processors, serializers, and high-speed interface blocks. The zero-delay architecture helps minimize added latency, while five independently programmable banks allow related clocks to be configured for different destinations. At the 756 MHz maximum device rating, the part can serve demanding digital clock domains when the selected PLL and divider settings are supported. Differential LVDS or LVPECL outputs should be routed with controlled impedance, and the exposed pad should be connected according to the manufacturer layout guidance to avoid thermal or supply problems.
推荐
Parallel ADC and DAC Clocking
The SY89538LHG can supply synchronized sample and forwarding clocks to parallel data converters in instrumentation and communications equipment. Its 756 MHz device rating provides headroom for high-speed conversion systems, while separate output banks can support clock phases or destinations selected through the device configuration. Input logic-level translation allows reference arrival in CMOS, LVTTL, HSTL, SSTL, LVDS, or LVPECL. Converter timing requirements must be checked against jitter, skew, output-divider, and propagation-delay specifications before the clock architecture is frozen.
推荐
Industrial Control and Data Acquisition
The SY89538LHG is suitable for industrial data-acquisition and control systems that need deterministic distribution of one reference across multiple sampling or processing sections. Its integrated PLL and five output banks replace separate oscillator, divider, and fanout stages, reducing component count and synchronization risk. The 2.375 V to 3.6 V operating range supports a conventional 3.3 V clock architecture, while LVDS and LVPECL outputs serve high-speed logic. Industrial temperature, isolation, grounding, and EMC requirements must be evaluated separately from the device's core clock specifications.
推荐
Test and Measurement Equipment
The SY89538LHG can serve as the central clock-distribution device in test and measurement instruments requiring coherent clocks for data capture, modulation, conversion, and synchronization. Its programmable output banks permit multiple clock routes from one PLL-based source, and the zero-delay implementation is valuable when minimizing added timing latency. Support for LVPECL and LVDS outputs accommodates common high-speed test architectures. Designers should verify output amplitude, termination, jitter, and skew against the instrument's acquisition requirements while keeping high-speed return paths continuous.
推荐
Storage and High-Speed Backplane Clocks
The SY89538LHG fits storage controllers, high-speed backplanes, and interface bridges that need several low-skew clocks derived from a common reference. Five independently programmable output banks simplify clock routing where different destinations require distinct divider or phase configurations, and the 756 MHz maximum rating supports high-speed signaling environments. LVDS or LVPECL outputs can be used depending on receiver requirements. The implementation must account for insertion loss, controlled-impedance routing, clock jitter, and termination near the receiving devices to preserve signal quality across the board.
推荐
推荐产品汇总
工程参考数据: SY89538LHG ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SY89538LHY | SY89538LHZ | SY89538LHH |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP Exposed Pad | 64-TQFP Exposed Pad | 64-TQFP Exposed Pad | 64-TQFP Exposed Pad |
| Device Type | Clock Synthesizer/Fanout Buffer | Clock Synthesizer/Fanout Buffer | Clock Synthesizer/Fanout Buffer | Clock Synthesizer/Fanout Buffer |
| Maximum Clock Frequency | 756 MHz | 756 MHz | 756 MHz | 756 MHz |
| Supply Voltage Range | 2.375 V to 3.6 V | 2.375 V to 3.6 V | 2.375 V to 3.6 V | 2.375 V to 3.6 V |
| PLL | Yes | Yes | Yes | Yes |
| Programmable Output Banks | 5 independent banks | 5 independent banks | 5 independent banks | 5 independent banks |
| Output Standards | LVDS and LVPECL | LVDS and LVPECL | LVDS and LVPECL | LVDS and LVPECL |
| Supported Inputs | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL | CMOS, HSTL, LVDS, LVPECL, LVTTL, and SSTL |
| Zero-Delay Operation | Yes | Yes | Yes | Yes |
| Ordering Qualification | G suffix configuration | Y suffix configuration | Z suffix configuration | H suffix configuration |
关键差异点
- Integrated zero-delay PLL and fanout architecture (对比 SY89537L)
- Five independently programmable output banks (对比 Discrete PLL and fanout-buffer chain)
- Broad input and output logic support (对比 Single-standard clock buffer)
- High-speed integrated timing function (对比 Low-frequency clock distribution buffer)
设计说明
Treat the 64-pin TQFP exposed pad as both a thermal feature and a required electrical connection. Follow the manufacturer land-pattern and pad-connection instructions, provide a low-impedance plane on the pad net, and avoid cutting the pad connection beneath the device with unrelated routing. For differential LVDS or LVPECL outputs, use matched pair geometry, controlled impedance, and short breakouts so the package transition does not create avoidable skew or reflection.
Place local bypass capacitors close to the supply and ground pins using the shortest possible current loop. Follow the manufacturer datasheet for the recommended capacitance, voltage rating, and connection of the exposed pad. Decoupling should be distributed around the package rather than concentrated at one corner. Confirm that the 2.375 V to 3.6 V supply remains within range across temperature, line-transient, and component-tolerance conditions.
Configure each differential output with the termination and reference-clock arrangement specified for LVDS or LVPECL receivers. Account for pair-length matching, connector or package transition effects, and any loss introduced by PCB material before relying on the nominal 756 MHz device rating. Validate eye margin, jitter, and inter-pair skew with the final receiver and test setup rather than evaluating the clock source alone.
Do not assume that every SY89538 ordering code is an unrestricted substitute. Confirm the pin table, PLL ranges, divider ranges, operating-temperature limits, qualification, and exposed-pad requirements for the complete MPN. The related SY89537L family member is intended for designs that do not require zero delay, so it should not replace the SY89538LHG without a deliberate timing-function change and system-level resynchronization.
合规信息
No explicit environmental or regulatory compliance statement is present in the manufacturer and distributor records for SY89538LHG. Confirm the applicable declaration using the ordering information and compliance documentation associated with the complete MPN.