TAS2560YFFR - 5.6W Smart Amp | Texas Instruments
料号: TAS2560YFFR ✓ 量产中TAS2560YFFR 概述
A smart audio amplifier is an integrated audio subsystem that combines digital signal conversion, amplification, output-stage drive, and protection functions. In the broader hierarchy, it belongs to the Class-D amplifier category, audio amplifier ICs, and power management semiconductors. Unlike a conventional analog-input power amplifier, the TAS2560 receives digital audio data and incorporates feedback derived from speaker voltage and current, enabling a host processor to implement speaker-protection algorithms.
The principal features include a 5.6 W output rating, digital input, mono Class-D output, an ultra-low-noise audio DAC, integrated 8.5 V Class-H boost, and speaker voltage-and-current sensing feedback. Its 1.65 V to 1.95 V core-supply range suits low-voltage portable audio systems. Additional features identified for the device include depop, short-circuit protection, and thermal protection. These functions support compact speaker modules requiring accurate feedback and controlled amplification behavior.
The device combines a digital-to-analog audio path, a switched Class-D power stage, and a Class-H boost converter. Speaker voltage and current feedback provide the measurement information needed to detect excursions and implement protection in software. The boost converter raises the Class-D output supply to 8.5 V, improving available output capability while retaining the low core-supply requirement. The -40 °C to 85 °C range covers industrial temperature environments, although final qualification remains the responsibility of the complete end product.
Typical uses include smartphone and tablet speaker amplifiers, portable Bluetooth speakers, voice-controlled speakers, soundbars, and other compact multimedia products. A single TAS2560YFFR supports a mono speaker path, while two devices can implement a stereo design. Its digital interface is especially useful when the system already routes audio through a digital signal processor or application processor, allowing protection behavior to be coordinated in the digital domain.
Designers should follow the manufacturer reference layout and pin-assignment instructions when routing the 30-pin DSBGA. The core supply, boost-converter connections, digital audio interface, feedback paths, and exposed thermal area require careful layout to control voltage loss, switching noise, and thermal performance. Speaker protection must be validated with the intended speaker because its impedance, excursion, sensitivity, and mechanical limits determine safe operating boundaries.
This page organizes the manufacturer product information into an application-oriented guide covering output capability, digital audio operation, feedback-based speaker protection, thermal limits, and the DSBGA implementation. It also distinguishes verified product facts from parameters that still require confirmation from the manufacturer datasheet before schematic, layout, or sourcing approval.
直接替换替代料: TAS2560YFFR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
TAS2560YFFT
✅ 直接替换📋 参考替代料(不在目录中)
TAS2560YFFR 最大额定值与电气特性
| Product Type | Digital-input smart audio amplifier |
| Maximum Output Power | 5.6 W |
| Amplifier Channel Count | 1 channel (mono) |
| Amplifier Topology | Class D |
| Integrated Boost Output Voltage | 8.5 V |
| Boost Topology | Class H |
| Audio Input | Digital |
| Core Supply Voltage Range | 1.65 V to 1.95 V |
| Speaker Feedback | Speaker voltage and current sensing |
| Output Power at 4 Ohm | 5 W x 1 channel |
| 封装 | 30-pin DSBGA (YFF) |
| 安装类型 | Surface mount |
| 工作温度范围 | -40 °C to 85 °C |
| 生命周期状态 | Active |
| Depop Function | Supported |
| Short-Circuit Protection | Supported |
| Thermal Protection | Supported |
| Packaging | Tape and reel |
TAS2560YFFR 30-pin dsbga (yff) 引脚配置指南
TAS2560YFFR(30-pin dsbga (yff) 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: TAS2560YFFR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TAS2560YFFR 适用于 6 应用s: Smartphone Speaker Amplification, Bluetooth Portable Speaker, Tablet Audio Amplifier, Voice-Controlled Speaker, Soundbar Speaker Drive, Industrial Audio Module.
Smartphone Speaker Amplification
The TAS2560YFFR fits smartphone speaker designs that already generate audio in the digital domain. Its digital input avoids a separate analog-input path, while the internal audio DAC and 5.6 W Class-D stage provide a compact amplification solution. The integrated 8.5 V Class-H boost supports a higher Class-D output rail from a 1.65 V to 1.95 V core supply. Speaker voltage and current feedback can feed the phone’s protection software, allowing excursion and thermal conditions to be evaluated during playback. The -40 °C to 85 °C device range is useful for consumer and industrial handheld platforms, but the designer must verify acoustic limits, thermal rise, and the specific DSBGA layout against the manufacturer data.
Bluetooth Portable Speaker
The TAS2560YFFR is suited to compact Bluetooth speakers whose audio processor outputs a digital signal. One device can provide the mono power stage, and two devices can support stereo operation. Its 5.6 W Class-D output, integrated 8.5 V Class-H boost, and digital speaker-voltage-and-current feedback reduce the number of separate amplification and protection blocks. The core supply range of 1.65 V to 1.95 V is particularly relevant to battery-powered products. In a portable enclosure, however, the designer must account for speaker sensitivity, minimum battery voltage, continuous versus peak output, heat dissipation, and protection thresholds. The manufacturer’s typical implementation and layout guidance should be followed before selecting capacitors and routing the sensitive feedback connections.
Tablet Audio Amplifier
A tablet can use the TAS2560YFFR as a digitally controlled speaker amplifier when its application processor or audio codec supplies a compatible digital stream. The internal DAC removes the need for a separate digital-to-analog conversion stage in many architectures, while the Class-D amplifier supplies up to 5.6 W. The Class-H boost converter raises the output-side rail to 8.5 V, which can improve usable output into a low-impedance speaker compared with using the low core rail directly. Speaker voltage and current sensing enables the host software to implement protection based on real operating conditions. Layout must preserve digital-signal integrity and keep boost and power-stage switching noise away from sensitive audio paths. Actual acoustic performance still depends on the tablet’s mechanical speaker, enclosure acoustics, and thermal design.
Voice-Controlled Speaker
The TAS2560YFFR fits voice-controlled speakers that combine digital audio processing with a compact internal loudspeaker. Because the amplifier accepts digital audio, the system can retain digital signal processing through notification playback, voice prompts, and media playback. Its speaker voltage and current feedback supports algorithms that respond to changes in load and excursion instead of relying only on fixed supply-current limits. The integrated 8.5 V Class-H boost is valuable in small enclosures where battery headroom is limited. Design decisions should account for the dynamic range between voice prompts and music, because protection settings that are too aggressive can clip playback while settings that are too permissive can damage a small speaker. Validate the control loop and limits with the production speaker and worst-case battery conditions.
Soundbar Speaker Drive
The TAS2560YFFR can serve as a digital-input power stage in a compact soundbar or auxiliary loudspeaker module. Its mono Class-D output supports a single speaker, while two devices can be used for a stereo arrangement. The integrated Class-H boost provides an 8.5 V output rail, and the 5.6 W headline output is appropriate for compact driver units. Digital speaker feedback allows a host processor to monitor electrical loading while playback algorithms control gain and protection. Designers should distinguish continuous music output from short-duration peak output and verify both against the driver specification. The 30-pin DSBGA also requires a dense, carefully routed PCB; thermal performance depends on the exposed package area, copper, surrounding components, and the enclosure’s heat-transfer path.
Industrial Audio Module
The TAS2560YFFR can be used in an industrial audio module that requires repeatable digital amplification and active speaker monitoring over a wide temperature range. Its specified -40 °C to 85 °C operating range is broader than typical consumer-only ambient conditions, while speaker voltage and current sensing can support deterministic protection decisions. The digital input is useful when an industrial controller handles audio generation, filtering, and diagnostics in software. A Class-H boost and low-voltage core supply can simplify power architecture, but system designers must verify startup behavior, brownout handling, and sustained output at the lowest available rail voltage. The complete module also needs environmental qualification, enclosure heat-path validation, and protection testing with the installed loudspeaker rather than a nominal laboratory load.
工程参考数据: TAS2560YFFR ——对比、设计指导和合规信息。
选型指南
设计说明
Follow the manufacturer’s YFF 30-DSBGA land pattern and reference layout exactly. Place input, output, boost, and decoupling connections directly at their associated package pins, and provide the prescribed low-impedance supply paths. A dense BGA also makes copper connection and thermal-via planning interdependent, so review the exposed-area connection and component-placement guidance in the manufacturer datasheet before PCB release.
Estimated: amplifier conduction loss scales with output power, supply voltage, and efficiency, but an exact thermal estimate requires the selected load, rail voltage, signal duty cycle, and package thermal data. Validate maximum continuous output in the final enclosure, provide adequate copper around the DSBGA thermal features where applicable, and verify that boost-converter and output-stage heating does not cause thermal-protection activation during normal playback.
Keep the digital audio interface and speaker-sensing routes short, continuous, and away from boost-converter switching nodes and high-current output paths. Maintain the ground reference specified by the manufacturer and use the recommended bypass-capacitor arrangement at the core and boost rails. Speaker voltage and current feedback is central to protection accuracy, so trace geometry should minimize disturbance from the Class-D output and boost stages.
合规信息
Compliance attributes were not stated in the available manufacturer or distributor results and require confirmation from the manufacturer product documentation.