TAS5036APFC - 6-Channel Digital Audio PWM Processor | Texas Instruments
料号: TAS5036APFC ✓ 量产中TAS5036APFC 概述
A digital audio PWM processor is an audio-special-purpose semiconductor that accepts digital audio information and generates the PWM drive signals required by a switching audio amplifier. Within the broader integrated-circuit hierarchy, the TAS5036APFC belongs to the audio special-purpose IC and DSP-related processing category. Its six-channel architecture consolidates several audio output channels into one device, reducing the number of separate driver components needed in a multiway amplifier design.
The key product attributes are the six-channel PWM processing capability, digital audio modulation function, 80-pin TQFP package and consumer-circuit temperature grade. The device is also associated with the Texas Instruments TAS5036 family, including related suffix and order-code variants that retain an 80-pin TQFP format. Commercial packaging and suffix differences must be checked against the system PCB footprint and procurement requirements.
The processor is intended to be paired with suitable PWM power stages and output-filter networks. The exact input format, audio clocking requirements, channel assignment, output configuration and protection behavior should be confirmed in the manufacturer datasheet before schematic capture or PCB layout is released. Because the processor controls multiple audio channels, clocking, grounding, EMI control and thermal performance of the associated power stages are as important as the processor itself.
Typical systems include powered home-theater speakers, active multimedia speakers, multiway television or monitor speakers, compact consumer audio products and other multi-channel audio products. The TAS5036APFC can reduce system component count when several speaker channels are driven from a common digital audio source, while preserving a clear separation between digital processing and analog power amplification.
For PCB implementation, reserve the complete 80-pin TQFP footprint, route high-current amplifier outputs as power-stage nets rather than processor signals, and place decoupling capacitors close to the supply pins. Verify all pin functions, exposed-pad requirements and recommended decoupling values against the manufacturer datasheet. This page consolidates the available product identification, package information and drop-in comparison data to support component selection.
直接替换替代料: TAS5036APFC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: TAS5036APFC (相同外形与封装尺寸) ——差异在于 Package.
TAS5036APFCG4
✅ 直接替换📋 参考替代料(不在目录中)
TAS5036BPFC
✅ 直接替换联系询价
查看数据手册 →TAS5036IPFCR
✅ 直接替换📋 参考替代料(不在目录中)
TAS5036APFCR
✅ 直接替换📋 参考替代料(不在目录中)
TAS5036APFCRG4
✅ 直接替换📋 参考替代料(不在目录中)
TAS5036APFC 最大额定值与电气特性
| Product Type | Six-channel digital audio PWM processor |
| Manufacturer | Texas Instruments |
| Number of Channels | 6 channels |
| Device Category | Audio special-purpose IC |
| Output Function | Digital audio PWM modulation |
| 封装 | 80-pin TQFP (TFQFP) |
| Package Body Size | 12 x 12 mm |
| Terminal Count | 80 terminals |
| Package Shape | Square |
| Lead Form | Gull wing |
| Temperature Grade | Commercial |
| 安装类型 | Surface mount |
| Datasheet File Size | 778 KB |
| Datasheet Page Count | 62 pages |
TAS5036APFC square 引脚配置指南
TAS5036APFC(square 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: TAS5036APFC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TAS5036APFC 适用于 6 应用s: Powered Home-Theater Speakers, Active Multiway Loudspeakers, Television and Monitor Audio, Digital Speaker Drive, Consumer Audio Amplification, Multi-Channel Audio Networking.
Powered Home-Theater Speakers
The TAS5036APFC fits powered home-theater speaker designs that require several synchronized digital PWM audio channels from one processing device. Its six-channel digital audio PWM architecture can organize multichannel amplification while leaving current delivery to dedicated switching power stages. This separation allows the processor and power stages to be optimized independently for conversion performance and thermal efficiency. Before implementation, confirm the supported digital audio format, clocking arrangement and channel timing in the manufacturer datasheet, then route clock and data lines away from switching nodes. The 80-pin TQFP package also requires careful ground-plane continuity and close placement of decoupling components to prevent switching activity from disturbing the digital audio signals.
推荐
Active Multiway Loudspeakers
The TAS5036APFC is well suited to active multiway loudspeakers that require a consistent digital source for several amplification channels. Its six-channel PWM output organization can support multi-driver configurations when paired with power stages selected for the required bandwidth and output power. The processor does not replace the analog power-amplifier sections, so each channel still needs suitable switching circuitry, passive filtering and protection. Designers should validate channel mapping, delay behavior and sample-rate support in the manufacturer documentation. PCB implementation should separate sensitive digital routing from high-current output paths and use a continuous ground plane beneath the processor while avoiding return-current coupling to switching stages.
推荐
Television and Monitor Audio
The TAS5036APFC can support television, display or monitor audio systems that need several amplified channels from a digital audio source. Its six-channel digital PWM processing role is useful in compact designs where reproducing separate surround or speech channels is required without dedicating a separate modulator to every output. The exact channel count and supported digital format must match the display system architecture, and the external amplifier stages determine available output power. Layout should place the processor away from display switching regulators and video timing circuits. Short digital routes, continuous return paths and local decoupling are especially important when the audio bus passes near high-speed display interfaces or switching power converters.
推荐
Digital Speaker Drive
The TAS5036APFC can be used in digital-speaker systems where a digital audio stream is converted into PWM commands for downstream switching power stages. Its six-channel architecture provides a practical route for compact multichannel digital speakers, including multimedia and personal-audio products. The processor should be paired with amplifier stages whose switching frequency, input thresholds and filter characteristics are compatible with its PWM outputs. Verify clock jitter tolerance and supported sample rates in the manufacturer datasheet. Keep processor outputs and clock signals over controlled-impedance paths where required, and isolate the audio ground path from high-current speaker returns to reduce ground bounce during high-volume playback.
推荐
Consumer Audio Amplification
The TAS5036APFC addresses consumer audio amplification platforms requiring several digital PWM channels within one audio subsystem. It can simplify system organization in powered speakers and compact entertainment products by centralizing digital modulation while external stages handle loudspeaker current. The design remains dependent on correct supply, clock and interface implementation, so use the manufacturer reference configuration as the starting point for component selection. Thermal requirements primarily belong to the power stages, but processor-area heat and nearby converter switching can affect signal integrity. Maintain short supply loops, use local bypass capacitance and provide test access for digital timing verification without creating long antenna-like traces.
推荐
Multi-Channel Audio Networking
The TAS5036APFC can participate in networked or distributed audio products that distribute a digital program signal to multiple powered outputs. Six-channel PWM processing supports centralized conversion of digital audio into amplifier-ready drive signals, while external stages can be located according to speaker placement and power requirements. Compatibility depends on the digital transport, clock source and timing alignment across the system. Use synchronized clocking and controlled routing to minimize channel-to-channel skew and EMI coupling. In distributed implementations, isolate ground currents from speaker outputs, maintain consistent reference planes and confirm that every downstream amplifier accepts the processor's specified PWM signaling levels and timing.
推荐
推荐产品汇总
工程参考数据: TAS5036APFC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TAS5036APFCG4 | TAS5036BPFC | TAS5036IPFCR | TAS5036APFCR | TAS5036APFCRG4 |
|---|---|---|---|---|---|---|
| Package | 80-pin TQFP | 80-pin TQFP | 80-pin TQFP | 80-pin TQFP | 80-pin TQFP | 80-pin TQFP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Six-channel digital audio PWM processor | Six-channel digital audio PWM processor | Six-channel digital audio PWM processor | Six-channel digital audio PWM processor | Six-channel digital audio PWM processor | Six-channel digital audio PWM processor |
| Channel Count | 6 channels | 6 channels | 6 channels | 6 channels | 6 channels | 6 channels |
| Package Body Size | 12 x 12 mm | 12 x 12 mm | 12 x 12 mm | 12 x 12 mm | 12 x 12 mm | 12 x 12 mm |
| Terminal Count | 80 terminals | 80 terminals | 80 terminals | 80 terminals | 80 terminals | 80 terminals |
| Functional Compatibility | Reference six-channel digital audio PWM processor | Documented complete replacement candidate | Documented same-package replacement candidate | Documented complete replacement candidate | Same processor family and package | Same processor family and package |
关键差异点
- Directly documented complete replacement candidate (对比 TAS5036APFCG4)
- Same-package family option in the B variant (对比 TAS5036BPFC)
- Compatible alternative order-code family (对比 TAS5036IPFCR)
设计说明
Use the exact 80-pin TQFP land pattern from the manufacturer package drawing and place local decoupling capacitors at the pins identified by the datasheet. Keep digital audio, clock and control routes away from switching-node copper and speaker-output paths. A continuous ground plane helps control return-current paths, but high-current amplifier returns should not force audio return current through the processor area.
Digital audio PWM systems combine low-level clock and control signals with high-energy switching outputs. Route the six PWM outputs as directed by the reference design, keep them short where possible and avoid running them beneath sensitive input or clock nets. Separate the quiet analog and digital sections from power-stage switching components, and evaluate radiated emissions after the complete amplifier and enclosure are assembled.
Confirm the supported audio data format, clock frequency, timing margins and channel synchronization from the manufacturer datasheet before assigning signal-processing functions. Provide test points for clock, data and PWM outputs so channel mapping can be checked during production. If the digital bus is long or crosses another subsystem boundary, use the interface, termination and shielding recommendations specified for that architecture rather than relying on the processor's nominal digital functionality alone.
Do not treat TAS5036APFC as a complete Class-D power amplifier: external switching stages, filters, protection and speaker connections are still required. Also do not assume that every TAS5036 suffix has the same assembly form. Confirm tray versus reel packaging, temperature grade, lifecycle status and exact electrical limits for the selected manufacturer order code before releasing the BOM.
合规信息
The available product information identifies a commercial-grade consumer IC but does not state material-compliance declarations. AEC-Q100 is treated as not applicable because the product is not presented as an automotive-qualified device.