TAS5508BPAG - 8-Channel Digital Audio PWM Processor | Texas Instruments
料号: TAS5508BPAG ✓ 量产中TAS5508BPAG 概述
An audio PWM processor is a specialized type of digital signal processor that accepts digital audio data and generates the pulse-width-modulated drive signals required by multi-channel Class-D audio output stages. Within the broader semiconductor hierarchy, it belongs to the digital signal processing family, then to audio DSPs, and ultimately to audio interface and power-management systems. The TAS5508BPAG is intended for systems that require more channels than a basic stereo audio interface can provide.
The principal identified features are eight PWM output channels, a 3 V to 3.6 V operating supply range, I2C control support, a serial digital-audio interface, and a compact 64-pin TQFP package. These characteristics make the device applicable to home-theater receivers, active speakers, multichannel amplifiers, sound bars, and other systems requiring several synchronized digital audio output channels. The I2C interface supports configuration from a system controller, while the serial interface connects the processor to an upstream audio source.
The integrated eight-channel PWM architecture reduces the number of separate digital audio output functions required in a multichannel design. Configuration is managed through digital control interfaces rather than discrete analog programming networks. Because the processor operates from a supply range extending down to 3 V, it can be paired with 3.3 V system logic. Its 10 mm by 10 mm TQFP package provides a standardized surface-mount footprint but requires careful thermal and layout planning during implementation.
Typical audio-system uses include powered speakers, surround-sound receivers, active speaker arrays, multi-zone amplifiers, and digital mixing equipment. In each case, the processor occupies the digital control and PWM-generation stage before power amplification and speaker output. System designers must select an external power stage compatible with the device's voltage, current, timing, and output requirements.
Use the manufacturer datasheet for the complete pin description, electrical limits, interface timing, recommended application circuit, and thermal information. A common implementation concern is ensuring that digital data, control signals, ground returns, and power-supply connections follow the specified layout because switching-edge energy from an audio system can affect signal integrity if routing is not controlled.
This page combines the exact manufacturer and distributor listing details with application guidance, interface considerations, and verified same-package replacement information. It is intended to help engineers identify the correct device, locate its documentation, and assess whether a candidate replacement preserves the 64-pin TQFP footprint.
直接替换替代料: TAS5508BPAG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: TAS5508BPAG (相同外形与封装尺寸) ——差异在于 Output Architecture, Package.
TAS5508CPAG
✅ 直接替换联系询价
查看数据手册 →TAS5508CPAGR
✅ 直接替换📋 参考替代料(不在目录中)
TAS5508BPAG 最大额定值与电气特性
| Product Type | 8-channel digital audio PWM processor |
| Number of Channels | 8 channels |
| Supply Voltage Range | 3 V to 3.6 V |
| Control Interface | I2C |
| Audio Interface | Serial digital audio interface |
| Output Architecture | Pulse-width modulation |
| 封装 | 64-pin TQFP |
| Package Dimensions | 10 mm x 10 mm |
| 安装类型 | Surface mount |
| Device Category | Audio special purpose IC |
TAS5508BPAG 10 mm x 10 mm 引脚配置指南
TAS5508BPAG(10 mm x 10 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: TAS5508BPAG.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TAS5508BPAG 适用于 6 应用s: Multichannel Home-Theater Receiver, Powered Speaker and Active-Speaker Array, Sound Bar and Compact Theater System, Digital Audio Mixing Console, Multizone Amplifier Platform, Professional Active Loudspeaker System.
Multichannel Home-Theater Receiver
The TAS5508BPAG fits a home-theater receiver that must convert digital audio into eight PWM channel signals. Its eight-channel PWM architecture allows a single processor to handle a surround-sound channel set while reducing the number of separate digital audio output functions. The I2C interface provides a route for receiver control software to configure the device, and the serial digital-audio interface can receive channel data from the system audio engine. The 3 V to 3.6 V supply range is compatible with 3.3 V logic systems. The receiver still needs external power stages selected for the intended output power, and the complete design should follow the manufacturer timing, grounding, and application guidance.
Powered Speaker and Active-Speaker Array
The TAS5508BPAG is appropriate for an active-speaker array requiring eight independently controlled digital audio outputs. It can receive multichannel audio through its serial interface and generate eight PWM signals for compatible external Class-D amplifiers. This arrangement is useful in powered surround speakers, cinema-room speakers, and compact distributed-audio products. The processor's 64-pin TQFP package supports dense board layouts, while the I2C interface permits centralized configuration and diagnostics. External amplifier selection remains critical because the power stage must support the processor's signal format, operating voltage, timing, and required channel count without introducing unacceptable distortion or thermal stress.
Sound Bar and Compact Theater System
A sound bar or compact theater system can use the TAS5508BPAG to consolidate eight-channel digital audio generation into one dedicated processor. Its eight-channel architecture is useful for surround, height, or subwoofer channels where a basic stereo DAC would be insufficient. The serial audio interface accepts digital channel data, and the I2C interface supports configuration by the sound-bar controller. Operation from a 3 V to 3.6 V rail allows integration with 3.3 V digital subsystems. Board designers should preserve clean power and ground paths and verify the external power-stage requirements before layout because a crowded sound-bar enclosure can increase thermal and EMI constraints.
Digital Audio Mixing Console
The TAS5508BPAG can serve as the output stage of a digital mixing console that distributes multichannel program audio into multiple active outputs. Its eight PWM channels suit applications with several monitor, zone, or line outputs, while the I2C interface allows the console controller to apply operating configurations. The serial digital-audio interface supports connection to the console's mixing engine or digital audio source. The processor is most useful when the output design requires consistent digital channel generation ahead of analog power amplification. Engineers should verify clocking, data mapping, latency expectations, and grounding from the manufacturer datasheet because those details determine whether an existing console architecture can be reused without modification.
Multizone Amplifier Platform
The TAS5508BPAG is suitable for a multizone amplifier that must drive several listening areas from a central digital audio engine. Eight PWM outputs provide a practical channel count for combinations of stereo music zones, surround channels, and subwoofers. The I2C interface supports system-level configuration, while the serial audio interface provides the intended high-rate digital audio path. Its 3 V to 3.6 V operating range can simplify integration with low-voltage digital controllers. The amplifier platform must still address speaker impedance, output power, protection, thermal rise, and channel-specific routing. The manufacturer application information should be used to design the interface and power-supply connections.
Professional Active Loudspeaker System
The TAS5508BPAG can support a professional active-loudspeaker system with eight digital PWM output channels. A central audio processor can send program material to the device, and the resulting PWM signals can feed suitable external power-amplifier stages. This architecture separates digital channel generation from analog output power and can simplify synchronization across multiple loudspeakers. The processor's I2C interface supports controlled setup, while the 64-pin TQFP package provides a practical surface-mount implementation. For professional deployments, validate audio latency, clock requirements, channel routing, fault behavior, and system grounding against the manufacturer datasheet before production release.
工程参考数据: TAS5508BPAG ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TAS5508CPAG | TAS5508CPAGR |
|---|---|---|---|
| Package | 64-pin TQFP (10 mm x 10 mm) | 64-pin TQFP (10 mm x 10 mm) | 64-pin TQFP (10 mm x 10 mm) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | 8-channel digital audio PWM processor | 8-channel digital PWM processor | 8-channel digital PWM processor |
| Channel Count | 8 channels | 8 channels | 8 channels |
| Output Architecture | Pulse-width modulation | Pulse-width modulation | Pulse-width modulation |
关键差异点
- Consolidated eight-channel digital PWM processing (对比 TAS5508CPAG)
- Established original-package implementation (对比 TAS5508CPAGR)
- Multichannel control and data connectivity (对比 TAS5508CPAG)
设计说明
Place the processor close to the external audio power stages and route each PWM output as a short, controlled trace. Long parallel runs can increase electromagnetic emissions and susceptibility to switching-edge coupling. Keep the digital-audio interface away from high-current amplifier paths, and use a continuous ground plane with short return paths for every digital signal. Follow the pin-description table and recommended layout in the manufacturer datasheet when assigning the 64 terminals.
Design the 3 V to 3.6 V supply with local high-frequency decoupling and verify startup, sequencing, and output behavior against the manufacturer requirements. The processor's digital interface can share a nominal 3.3 V domain, but clocks, control signals, and power rails still need deliberate sequencing where the host controller imposes ordering constraints. Check the absolute maximum ratings and recommended operating conditions before finalizing voltage tolerances.
Treat the serial digital-audio interface and I2C wiring as clocked or edge-sensitive signals. Route clock and data in a consistent topology, minimize stubs, keep return paths continuous, and observe any spacing and impedance guidance in the manufacturer datasheet. Avoid routing these signals beneath or directly beside switching power-stage nodes. A common failure mode is intermittent channel corruption caused by coupling between PWM outputs, high-current returns, and digital input nets.
合规信息
Compliance declarations are not identified in the manufacturer or distributor listing excerpts for this device. Confirm current environmental and product qualification statements with Texas Instruments before production release.