Texas Instruments

TMS320BC52PJ57 - 57MHz Fixed-Point DSP | Texas Instruments

料号: TMS320BC52PJ57 ✗ 停产
100-QFP (20 x 14 mm) Package 57 MHz Speed ROM Memory
最小起订量: 1 |

TMS320BC52PJ57 概述

Texas Instruments TMS320BC52PJ57 is a fixed-point digital signal processor with a 57 MHz clock, a 16-bit CPU, 512 RAM words, and a 100-QFP package measuring 20 x 14 mm. It belongs to the TMS320C5x family and combines a Harvard-style processor architecture with specialized signal-processing instructions and on-chip memory for embedded DSP workloads.

A digital signal processor is a microprocessor architecture optimized for filtering, spectral analysis, control, and other arithmetic-intensive operations. In the product hierarchy, a DSP is an embedded processor and an integrated circuit, but its parallel data movement, multiply-accumulate capability, and real-time instruction execution differ from a general-purpose microcontroller. The TMS320BC52 architecture extends the earlier TMS320C25 design with advanced Harvard architecture, on-chip peripherals, on-chip memory, and a specialized instruction set.

The processor uses a 16-bit fixed-point architecture and supports single-cycle multiply-accumulate operations. Listed execution times include 25 ns, 35 ns, and 50 ns for 5 V operation and 25 ns, 40 ns, and 50 ns for 3 V operation, covering different device variants or operating modes. Its 57 MHz maximum clock supports deterministic real-time processing, while the 100-QFP package provides 100 external connections in a surface-mount footprint.

On-chip resources reduce external bus traffic for many control and signal-processing tasks. The device includes 512 RAM words, ROM, additional on-chip RAM, and boundary-scan support for board-level testing. Boundary Scan facilitates production test and debugging by shifting test instructions through dedicated serial paths, helping verify assembled PCB interconnections.

Typical uses include industrial motor control, communications signal processing, industrial automation, audio and control processing, and embedded instrumentation. Its fixed-point arithmetic and multiply-accumulate pipeline are well suited to sampled-data systems where predictable latency is more important than general-purpose software flexibility. For these systems, the TMS320BC52PJ57 combines computational throughput, memory resources, and test support in one integrated circuit.

Designers should account for the processor's supply voltage, external memory interface, clock requirements, and 100-pin footprint when creating a PCB layout. Input, output, and memory interfaces should be routed with timing and signal-integrity discipline, while decoupling and clock routing should follow the manufacturer's recommended circuit. Software design should use fixed-point scaling carefully to preserve numerical range and precision.

This product page combines the exact manufacturer and distributor specifications, same-package replacement guidance, comparison parameters, and practical implementation notes. These engineering details help shorten component selection, PCB planning, firmware development, and production-test preparation for the TMS320BC52PJ57.

直接替换替代料: TMS320BC52PJ57 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: TMS320BC52PJ57 (相同外形与封装尺寸) ——差异在于 Package.

Texas Instruments
Package: 100-pin PQFP
对比 TMS320BC52PJ57 →

TMS320BC52P57

✅ 直接替换 ⚠️ 规格未核验
📦 100-QFP (20 x 14 mm)
Same 57 MHz class and 100-pin PQFP footprint; clock difference is 0 MHz, while the ordering temperature grade may differ.

📋 参考替代料(不在目录中)

TMS320BC52PZA57

✅ 直接替换 ⚠️ 规格未核验
📦 100-QFP (20 x 14 mm)
Same 57 MHz class and 100-pin PQFP footprint; clock difference is 0 MHz, with a different ordering qualification suffix.

📋 参考替代料(不在目录中)

TMS320BC52PJP57

✅ 直接替换 ⚠️ 规格未核验
📦 100-QFP (20 x 14 mm)
Same 57 MHz class and 100-pin PQFP footprint; clock difference is 0 MHz, while the ordering suffix identifies the device grade.

📋 参考替代料(不在目录中)

TMS320BC52PJ57 规格参数

Product Type Fixed-Point Digital Signal Processor (DSP)
Processor Architecture 16-bit TMS320C5x CPU
最大时钟频率 57 MHz
Listed Clock Frequency 57.14 MHz
CPU Bit Width 16-bit
Arithmetic Format Fixed Point
On-Chip RAM 512 RAM words
Program Memory ROM
Boundary Scan Support Yes
封装 100-QFP (20 x 14 mm)
引脚数量 100 pins
安装类型 Surface Mount
5 V Single-Cycle Execution Time 25 ns, 35 ns, and 50 ns
3 V Single-Cycle Execution Time 25 ns, 40 ns, and 50 ns
5 V Operation Supported
3 V Operation Supported
Multiply-Accumulate Capability Single-Cycle x 16-Bit Multiply/Add
Datasheet Length 91 pages

TMS320BC52PJ57 100-qfp (20 x 14 mm) 引脚配置指南

TMS320BC52PJ57(100-qfp (20 x 14 mm) 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

TMS320BC52PJ57 的 100-qfp (20 x 14 mm) 封装引脚图

暂无详细引脚数据: TMS320BC52PJ57.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TMS320BC52PJ57 适用于 6 应用s: Industrial Motor Control, Industrial Automation and Signal Conditioning, Communications Signal Processing, Audio and Control Processing, Embedded Instrumentation, Boundary-Scan Production Testing.

🏭

Industrial Motor Control

The TMS320BC52PJ57 fits motor-control loops that require repeated multiply-accumulate operations on sampled position, current, and speed data. Its 16-bit fixed-point architecture and 57 MHz clock provide deterministic numerical processing without the overhead of a general-purpose instruction set. Place the DSP close to the power-stage sensing and drive circuitry, then apply fixed-point scaling for current and velocity loops. The 100-QFP footprint offers dedicated external bus and control connectivity, while 512 RAM words support working state and control buffers. Designers should verify the exact peripheral assignments and electrical limits in the manufacturer datasheet before assigning the most latency-sensitive signals.

🏭

Industrial Automation and Signal Conditioning

The TMS320BC52PJ57 is suitable for sensor-conditioning and automation modules that continuously filter, scale, and analyze sampled data. Its 57 MHz clock supports timely execution of fixed-point algorithms, while the 16-bit word length aligns with many industrial acquisition systems. On-chip RAM can hold short working buffers, and ROM supports fixed boot or control routines. A practical implementation keeps analog inputs, external memory, and actuator outputs on separate routing regions, then uses the boundary-scan interface for production interconnect testing. Firmware should establish a defined numeric range for each filter coefficient and accumulator to avoid overflow during sustained operation.

🌐

Communications Signal Processing

The TMS320BC52PJ57 can support embedded communications tasks requiring efficient fixed-point arithmetic, including filtering, modulation-related calculation, and spectral processing. The specialized multiply-accumulate architecture is better aligned to these workloads than general-purpose branch-heavy code. Its 57 MHz operating rate and 512 RAM words are useful for short deterministic buffers, while the 100-QFP package provides a practical pin count for bus, serial, and control connections. For a production design, check external memory bandwidth, clock tolerance, and available peripheral interfaces in the manufacturer documentation. A controlled impedance layout and short return paths are important when communication signals share the same PCB.

🎧

Audio and Control Processing

The TMS320BC52PJ57 is applicable to compact audio-control subsystems where filtering, gain control, and mixed-signal adjustment must execute predictably. Its 16-bit fixed-point datapath is a natural match for many sampled audio algorithms, and the 57 MHz clock provides useful throughput for time-sensitive processing. The DSP can sit between external converters and a communications or control interface, using on-chip RAM for short sample windows. The key design trade-off is system partitioning: the fixed-point architecture supports efficient arithmetic but requires careful coefficient scaling and overflow checks. Layout should isolate converter clocks and high-slope return currents from sensitive input paths to reduce coupling into the processed signal.

🔧

Embedded Instrumentation

The TMS320BC52PJ57 suits embedded measurement instruments that perform calibration, filtering, numerical conversion, and real-time analysis on acquired samples. Its deterministic 16-bit processing and on-chip memory reduce reliance on external storage for short computation chains. Boundary-scan support adds board-level production-test capability, which is valuable in compact 100-QFP assemblies where probing individual nets is inconvenient. Implement the analog front end separately from the processor area, provide local supply decoupling, and route clock and memory interfaces away from high-impedance sensing nodes. Firmware should define scaling and saturation behavior for each conversion stage so that results remain deterministic across operating temperatures.

🖥️

Boundary-Scan Production Testing

The TMS320BC52PJ57 supports boundary-scan-assisted production testing in dense embedded systems where conventional fixture access to a 100-QFP package is difficult. The manufacturer identifies boundary scan as a device feature, allowing board test equipment to access test resources through the serial test path and inspect assembled interconnections. Use the processor on boards that include the required test-access routing, connector pads, and power-control sequence. For a reliable test strategy, define boundary-scan descriptor data, fixture launch behavior, and power states in the test plan. The serial test network should remain isolated from noisy external interfaces and be checked for signal integrity at the production boundary.

What is the TMS320BC52PJ57?
The TMS320BC52PJ57 is a Texas Instruments fixed-point digital signal processor operating at up to 57 MHz in a 100-QFP package measuring 20 x 14 mm. According to the Texas Instruments TMS320BC52 datasheet, its architecture provides a 16-bit CPU, single-cycle multiply-accumulate operation, 512 RAM words, ROM, additional on-chip RAM, and boundary-scan support for production testing.
What are the key specifications of TMS320BC52PJ57 that engineers should know?
The principal TMS320BC52PJ57 specifications are a 57 MHz clock, 16-bit fixed-point architecture, 512 RAM words, and a 100-QFP surface-mount package. The Texas Instruments TMS320BC52 datasheet also identifies ROM, additional on-chip RAM, boundary-scan support, and single-cycle 16-bit multiply-accumulate capability. These features make the processor suitable for deterministic embedded DSP, control, and communications tasks.
Where can I download the TMS320BC52PJ57 datasheet PDF?
The TMS320BC52PJ57 datasheet is available through the Texas Instruments product page linked on this page and through the indexed 91-page datasheet copy. According to the Texas Instruments TMS320BC52 documentation, it covers the C5x architecture, memory organization, instruction timing, peripherals, electrical characteristics, and package information. Use the manufacturer copy for design release and production qualification.
Where can I find the TMS320BC52PJ57 pinout?
The TMS320BC52PJ57 uses a 100-QFP package with a 20 x 14 mm body, and the pin-assignment table appears in the Texas Instruments TMS320BC52 datasheet. Use that pin-description table when assigning power, ground, clock, memory, serial-interface, test, and control signals. The package drawing and pin numbering should be cross-checked against the exact PCB footprint before routing begins.
Is TMS320BC52PJ57 suitable for industrial real-time control?
The TMS320BC52PJ57 is suitable for real-time control workloads that benefit from a 57 MHz fixed-point DSP and deterministic multiply-accumulate performance. Its 16-bit CPU, on-chip memory, and boundary-scan support can simplify embedded signal-processing and control designs. The final suitability depends on the required temperature grade, I/O levels, memory interface, and external circuitry, which must be checked against the datasheet.
What can replace the TMS320BC52PJ57 on the same PCB?
The closest same-family choices are the TMS320BC52P57, TMS320BC52PZA57, and TMS320BC52PJP57, which retain the 57 MHz class, 100-pin PQFP footprint, and DSP electrical role. Their ordering temperature grades can differ from the TMS320BC52PJ57, so a mechanical footprint match is not enough; verify temperature range, supply limits, pin functions, and production status before substitution.
Is TMS320BC52PJ57 the same as TMS320C52PJA57?
The TMS320BC52PJ57 and TMS320C52PJA57 are both 100-pin, 16-bit, 57 MHz-class TI DSPs, but they are not automatically interchangeable. The TMS320C52 belongs to a related product family and its exact electrical, timing, memory, temperature, and lifecycle characteristics must be checked against the TMS320BC52PJ57 datasheet. Do not approve a replacement based only on clock rate and pin count.
When should I choose TMS320BC52PJ57 instead of a general-purpose microcontroller?
Choose the TMS320BC52PJ57 when a design repeatedly performs fixed-point filtering, multiply-accumulate calculations, or other sampled-signal operations with predictable execution timing. A general-purpose microcontroller may be preferable for extensive control logic, broad peripheral integration, or software-only products. The DSP is more appropriate when its specialized instruction set and on-chip processing resources materially improve the signal-processing workload.
TMS320BC52PJ57 vs TMS320C53SPZ - which is better for a new design?
The TMS320BC52PJ57 is the better match when an existing design requires the TMS320BC52 in a 100-QFP footprint because it provides 512 RAM words and a 57 MHz fixed-point processor in that package. The TMS320C53SPZ uses a different package and product architecture, so it is not a drop-in replacement. For a new design, compare memory, peripherals, tooling, lifecycle, and system requirements rather than clock speed alone.
What is the difference between TMS320BC52PJ57 and TMS320BC52P57?
The TMS320BC52PJ57 and TMS320BC52P57 share the 57 MHz fixed-point DSP role and 100-pin PQFP package, while their ordering suffixes can identify different qualification or temperature grades. The clock rate difference is 0 MHz. Before using either as a replacement, confirm the manufacturer ordering table, operating-temperature limits, electrical ratings, pin functions, and lifecycle status for the exact suffix.
How much on-chip RAM does TMS320BC52PJ57 have?
The TMS320BC52PJ57 includes 512 RAM words of on-chip RAM, in addition to ROM and further internal memory resources identified for the device. According to the Texas Instruments TMS320BC52 datasheet, the memory organization distinguishes internal program and data storage from the external processor bus. Firmware architects should use the memory map to place code, variables, and working buffers correctly.
Why is boundary-scan support useful on TMS320BC52PJ57?
Boundary-scan support enables structured access to device test resources through the serial test interface, allowing assembled boards to be checked for opens, shorts, and interconnect faults. The Texas Instruments TMS320BC52 datasheet identifies boundary scan as a device feature. It is especially useful in production test environments where physical probe access to densely routed 100-QFP signals would otherwise be difficult.
Is TMS320BC52PJ57 in stock and what is its lead time?
The current stock position and lead time should be requested through the Request a Quote form on this page. Because this is an obsolete product, availability may be limited to remaining inventory or qualified sourcing channels rather than routine production supply. The purchase request should state the required quantity, package variant, date code, inspection requirements, and target delivery date.
Where can I buy TMS320BC52PJ57 and check its current price?
Use the Request a Quote form on this page to request the current TMS320BC52PJ57 price, stock position, minimum order quantity, and lead time. The TMS320BC52PJ57 is listed as obsolete, so a quotation should confirm whether the offered units are original, unused stock and whether traceability or date-code requirements can be met before the order is released.
What is the price of TMS320BC52PJ57?
The current TMS320BC52PJ57 quotation is handled through the Request a Quote form on this page. Pricing for an obsolete processor can depend on remaining inventory, date code, condition, traceability, quantity, and delivery requirements. Submit the required part quantity and inspection criteria with the quote request to receive an actionable commercial response.

工程参考数据: TMS320BC52PJ57 ——对比、设计指导和合规信息。

选型指南

Choose the TMS320BC52PJ57 when maintaining an existing 57 MHz, 16-bit fixed-point DSP design with a 100-QFP footprint and 512 RAM words. The TMS320BC52P57, TMS320BC52PZA57, and TMS320BC52PJP57 are same-family drop-in candidates when their exact ordering suffixes provide acceptable temperature, qualification, lifecycle, and sourcing requirements. Use the TMS320C52PJA57 only after a complete electrical and pin-function comparison because its related-family identity does not guarantee interchangeability. The TMS320C53SPZ belongs to a different package and architecture, making it suitable for a board redesign rather than a direct replacement. For any obsolete-device program, preserve the original footprint, verify boundary-scan access, document approved alternate parts, and request traceability information before production release.

与替代料对比

参数 本产品 TMS320BC52P57 TMS320BC52PZA57 TMS320BC52PJP57
Package 100-QFP (20 x 14 mm) 100-QFP (20 x 14 mm) 100-QFP (20 x 14 mm) 100-QFP (20 x 14 mm)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Fixed-Point DSP Fixed-Point DSP Fixed-Point DSP Fixed-Point DSP
Maximum Clock Frequency 57 MHz 57 MHz 57 MHz 57 MHz
CPU Bit Width 16-bit 16-bit 16-bit 16-bit
On-Chip RAM 512 RAM words 512 RAM words 512 RAM words 512 RAM words
Program Memory ROM ROM ROM ROM
Boundary Scan Support Yes Yes Yes Yes
5 V Single-Cycle Execution Time 25 ns, 35 ns, and 50 ns 25 ns, 35 ns, and 50 ns 25 ns, 35 ns, and 50 ns 25 ns, 35 ns, and 50 ns

关键差异点

  • Retains the original 57 MHz processing class (对比 TMS320C52PJA57)
  • Provides 512 RAM words for embedded working buffers (对比 TMS320BC52P57)
  • Supports structured board-level production testing (对比 TMS320BC52PZA57)
  • Uses a compact 100-pin surface-mount footprint (对比 TMS320C53SPZ)

设计说明

Use the 100-QFP pin-description and land-pattern information in the Texas Instruments TMS320BC52 datasheet to create the PCB footprint. Assign all 100 package positions, including power, ground, clock, memory, control, serial, and test functions, before routing. Keep the external processor bus traces short, use a continuous ground reference where possible, and match interface timing to the selected clock and operating voltage. Inspect the bare board with boundary scan to identify opens and shorts before full functional test.

The TMS320BC52 supports operation at 3 V and 5 V, and the manufacturer lists multiple single-cycle execution times for those supply conditions. Select the power design and external components for the exact ordering suffix rather than assuming that every 57 MHz variant has identical current limits or timing. Provide local supply decoupling close to the device, route return currents without narrow neckdowns, and verify power sequencing against every peripheral and memory device on the board.

Clock and external-memory signals determine whether the processor achieves deterministic operation at 57 MHz. Route the clock away from noisy analog and power-conversion paths, provide a continuous return plane, and avoid stubs or unnecessary test vias. Because the device uses a 16-bit external datapath in applicable configurations, evaluate bus timing and loading at the actual board length rather than relying only on nominal processor timing. Series termination and buffer strength should follow the manufacturer's interface guidance.

Do not substitute a processor using pin count and clock rate as the only criteria. Confirm that the exact replacement suffix has the same 100-QFP dimensions, exposed or thermal requirements, supply ratings, pin functions, peripheral configuration, boundary-scan behavior, operating-temperature range, and lifecycle plan. For this obsolete family, preserve the original schematic and PCB documentation with every approved alternate-part record to prevent an ordering-code mismatch.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The target is listed as obsolete. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current product documentation.

相关搜索

TMS320BC52PJ57 datasheet TMS320BC52PJ57 specifications TMS320BC52PJ57 pinout TMS320BC52PJ57 datasheet pdf TMS320BC52PJ57 equivalent TMS320BC52PJ57 replacement TMS320BC52PJ57 cross reference TMS320BC52PJ57 vs TMS320C52PJA57 TMS320BC52PJ57 price TMS320BC52PJ57 stock Texas Instruments TMS320BC52PJ57 TMS320BC52PJ57 100 QFP footprint TMS320BC52PJ57 motor control TMS320BC52PJ57 boundary scan

相关元器件 & 术语

Texas Instruments TMS320BC52PJ57 TMS320BC52P57 TMS320BC52PZA57 TMS320BC52PJP57 TMS320C52PJA57 TMS320C53SPZ TMS320F241PGS TMS320F240PQA digital signal processor DSP fixed-point processor embedded processor integrated circuit 16-bit CPU 57 MHz 512 RAM words ROM multiply-accumulate Harvard architecture boundary scan 100-QFP PQFP surface mount industrial motor control communications signal processing embedded instrumentation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情