TMS320C30GEL50 - 50 MHz Floating-Point DSP | Texas Instruments
料号: TMS320C30GEL50 ✗ 停产TMS320C30GEL50 概述
A digital signal processor is a specialized semiconductor that executes arithmetic operations on streams of sampled data. The TMS320C30 belongs to the DSP hierarchy, combining a floating-point arithmetic architecture, dedicated memory, serial communication, and parallel external interfaces. Unlike a general-purpose microprocessor, its architecture is optimized for filtering, Fourier analysis, waveform generation, and control calculations that require predictable real-time execution.
The processor's headline features include a 50 MHz clock, 50 MFLOPS, 25 MIPS, 16 kB of ROM, and 8.25 kB of RAM. The serial interface supports communication with converters, codecs, and other digital signal-processing peripherals. Its 181-CPGA package provides a high pin count for external memory and I/O expansion, although that package style requires careful connector compatibility checks and is less common than modern plastic leaded packages.
Texas Instruments documents three speed grades in the TMS320C30 family: a 40 ns instruction-cycle version rated at 275 MOPS, 50 MFLOPS, and 25 MIPS; a 50 ns version rated at 220 MOPS, 40 MFLOPS, and 20 MIPS; and a 60 ns version rated at 183.3 MOPS, 33.3 MFLOPS, and 20 MIPS. The GEL50 designation identifies the 50 MHz configuration for system-level design matching.
Typical uses include embedded audio processing, industrial measurement, communications signal handling, vibration analysis, control-system front ends, and real-time filtering. The floating-point arithmetic format simplifies algorithm implementation, while the dedicated on-chip memories reduce the amount of external memory required for compact designs. The external bus remains useful when an application needs additional memory or peripheral devices.
Before replacing another processor, verify the package, pin assignments, clock source, memory organization, peripheral set, and software compatibility. A device with the same ceramic grid-array outline is not automatically a drop-in replacement. Compare the complete pin-description tables, power requirements, and timing parameters in the manufacturer datasheet, then confirm whether the existing software and development tools support the substitute.
This product page combines the exact TMS320C30GEL50 identification, family performance figures, package details, sourcing fields, and engineering guidance to support initial design review. It also distinguishes a verified same-package lower-speed family member from functionally related processors that require different packages or system adaptations.
直接替换替代料: TMS320C30GEL50 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: TMS320C30GEL50 (相同外形与封装尺寸) ——差异在于 Clock Frequency, Package Dimensions.
TMS320C30GEL40
✅ 直接替换联系询价
查看数据手册 →TMS320C30GEL50 规格参数
| Device Type | Floating-point digital signal processor (DSP) |
| Clock Frequency | 50 MHz |
| Maximum Performance | 50 MFLOPS |
| Instruction Rate | 25 MIPS |
| On-Chip ROM | 16 kB |
| On-Chip RAM | 8.25 kB |
| Serial Interface | 1 serial interface |
| 封装 | 181-CPGA ceramic pin-grid array |
| Package Dimensions | 39 x 39 mm |
TMS320C30GEL50 39 x 39 mm 引脚配置指南
TMS320C30GEL50(39 x 39 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: TMS320C30GEL50.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TMS320C30GEL50 适用于 6 应用s: Embedded Digital Filtering, Audio Signal Processing, Industrial Measurement, Communications Signal Handling, Vibration and Motion Analysis, Control-System Front End.
Embedded Digital Filtering
TMS320C30GEL50 suits embedded filtering systems that require deterministic floating-point computation at 50 MFLOPS and 25 MIPS. Its dedicated DSP architecture can execute finite impulse response, infinite impulse response, and adaptive-filter kernels without emulating them on a general-purpose processor. The 16 kB ROM and 8.25 kB RAM support compact boot and working-memory arrangements, while the serial interface can connect to a converter or codec. Compared with a lower-clock replacement, the 50 MHz GEL50 grade preserves higher throughput and shorter processing windows, although the 181-CPGA package requires verified connector and layout compatibility.
推荐
Audio Signal Processing
TMS320C30GEL50 can serve as the computational core of an embedded audio-processing subsystem where filtering, mixing, or spectral analysis must run in real time. Its floating-point arithmetic supports convenient development of audio algorithms, while the serial interface provides a natural path to a codec or converter. The 50 MHz clock and 25 MIPS rating offer more processing headroom than the 40 MHz GEL40 family member. System designers should account for the ceramic 181-CPGA package, provide a regulated 5 V rail, and confirm software and codec timing against the manufacturer interface definitions.
推荐
Industrial Measurement
TMS320C30GEL50 is appropriate for industrial measurement front ends that acquire sampled sensor data and perform filtering or analysis on the DSP itself. Its 8.25 kB of on-chip RAM can hold short working buffers and algorithm state, while the external interface permits expansion when larger arrays are required. The 50 MFLOPS rating supports real-time numerical workloads with predictable instruction timing. Compared with a general-purpose controller, the dedicated floating-point architecture concentrates arithmetic capability in a single processor; the principal design constraints are the 5 V supply requirement, 181-CPGA availability, and legacy software maintenance.
推荐
Communications Signal Handling
TMS320C30GEL50 can implement communications-side signal-processing functions such as filtering, modulation support, and spectral analysis in embedded equipment. The processor's 50 MHz clock and 25 MIPS throughput provide useful margin for deterministic operations, while its serial interface supports connection to conversion and framing components. A designer replacing a 40 MHz GEL40 implementation should check whether the reduced processing window affects timing or whether the faster GEL50 grade improves margin. Board-level work must preserve the 181-CPGA pin assignments and account for the processor's 5 V operating supply.
推荐
Vibration and Motion Analysis
TMS320C30GEL50 is well matched to vibration-analysis and motion-processing systems that must transform sampled acceleration or velocity data in real time. Floating-point arithmetic supports scaling and numerical routines commonly used in spectral estimation, while the 8.25 kB RAM can service short-time buffers and the serial interface can accept data from an analog front end. The 50 MHz GEL50 configuration offers 25 MIPS for algorithm execution, reducing the risk of missed acquisition windows. Engineering teams should validate sensor timing, external memory requirements, thermal conditions, and the mechanical availability of the 181-CPGA ceramic package.
推荐
Control-System Front End
TMS320C30GEL50 can serve as the numerical front end of a control system requiring fast filtering, signal transformation, or compensation calculations. Its dedicated floating-point DSP architecture and 50 MFLOPS rating provide a clear distinction from a general-purpose control processor performing sequential software tasks. The on-chip RAM supports compact control code and state, while the serial interface can exchange data with remote converters or supervisory controllers. For a legacy upgrade, confirm that the 50 MHz timing is supported by existing clock and memory interfaces and that software artifacts remain compatible with the TMS320C30 architecture.
推荐
工程参考数据: TMS320C30GEL50 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TMS320C30GEL40 |
|---|---|---|
| Package | 181-CPGA (39x39) | 181-CPGA (39x39) |
| Brand | Texas Instruments | Texas Instruments |
| Clock Frequency | 50 MHz | 40 MHz |
| Processor Type | Floating-point DSP | Floating-point DSP |
关键差异点
- Higher clock than the verified same-package GEL40 option (对比 TMS320C30GEL40)
- Documented real-time processing capacity (对比 TMS320C30GEL40)
- Integrated memory for compact embedded signal processing (对比 TMS320C30GEL40)
设计说明
Do not treat the matching 181-CPGA outline as proof of electrical interchangeability. Check every assigned pin, supply input, memory interface, serial-interface signal, clock connection, and no-connect position against the manufacturer pin-description table. Also verify the clock and memory timing because TMS320C30GEL40 operates at 40 MHz rather than the 50 MHz of TMS320C30GEL50.
Plan a stable 5 V supply with local decoupling at the processor and any external memory. The distributor listing identifies a 5 V device, but the manufacturer electrical-characteristics table must control voltage tolerance, current demand, and sequencing. For a board upgrade, confirm that the existing regulator has enough transient margin for the selected processor speed and peripheral configuration.
Preserve the 181-CPGA footprint, pad geometry, connector alignment, and escape-routing strategy of the existing board when designing a replacement. Provide unobstructed mechanical clearance around the ceramic package and account for its 39 x 39 mm dimensions. Signal-integrity performance depends on controlled clock routing and external-bus layout, so compare those paths with the original design rather than relying on package dimensions alone.
Validate both hardware and software before committing to a lower-clock replacement. Reduced clock frequency changes execution time and any real-time sampling window. Rebuild or verify the DSP software image, confirm that the serial-interface baud rate and external-memory timing remain acceptable, and execute system-level tests with the production sensor, converter, or codec.
合规信息
The manufacturer datasheet and the identified component listings do not state a complete compliance profile in the cited material. AEC-Q100 is not applicable to this legacy general-purpose processor package.