Texas Instruments

TMS320C6421ZDUL - 400MHz 32-Bit Fixed-Point DSP | Texas Instruments

料号: TMS320C6421ZDUL ✓ 量产中
1.05 V Vdss 376-ball BGA (ZDU) Package 400 MHz Speed
最小起订量: 1 |

TMS320C6421ZDUL 概述

Texas Instruments TMS320C6421ZDUL is a 32-bit fixed-point digital signal processor built on the third-generation advanced Veloci TI very-long-instruction-word architecture. The device is identified at 400 MHz, operates from a 1.05 V core supply, and is packaged in a 376-ball BGA measuring 23 mm by 23 mm. The device family supports clock rates up to 600 MHz and includes an 8-bit EMIFA plus a 16-bit DDR2 SDRAM interface.

A digital signal processor is a programmable semiconductor optimized for arithmetic-intensive operations. In the product hierarchy, the TMS320C6421 belongs to the C64x+ DSP family, the TMS320C6000 platform, digital signal processors, and embedded processors. Unlike a general-purpose microcontroller, this device combines parallel execution units with dedicated memory interfaces for deterministic signal-processing workloads such as filtering, transforms, communications, control, and multimedia data processing.

The principal device characteristics include a 32-bit fixed-point processing architecture, a 400 MHz listed operating frequency for this orderable MPN, a 1.05 V core voltage, and a 376-terminal BGA package. Its EMIFA provides 8-bit asynchronous memory interfacing, while the 16-bit DDR2 SDRAM interface supports high-bandwidth access to external memory. The fixed-point architecture favors deterministic arithmetic and is particularly useful when intermediate numerical scaling is managed carefully.

The C64x+ architecture is based on the advanced Veloci TI VLIW design, allowing software instructions to organize multiple parallel operations into a single very-long instruction word. This execution model is intended to improve throughput for loops, filtering, and other computationally intensive sequences. The device must be paired with suitable external memory and clocking circuitry because the 376-ball package provides extensive device, power, ground, and high-speed memory connections.

Typical applications include industrial control, communications infrastructure, audio and video processing, radar signal processing, test and measurement equipment, and embedded multimedia systems. In each case, the processor's fixed-point arithmetic and dedicated external-memory interfaces can reduce the burden placed on a host processor while supporting deterministic real-time operation.

PCB implementation requires careful power-plane design, decoupling, and high-speed routing for the EMIFA and DDR2 interfaces. The BGA land pattern also demands controlled assembly processes and inspection methods. Before releasing a replacement design, engineers should verify the exact clock rating, memory topology, power sequencing, thermal conditions, and exposed-pad connection against the manufacturer datasheet.

This product page combines the exact orderable-device identity, package information, architecture characteristics, interface details, sourcing guidance, and a conservative drop-in-replacement assessment. It also highlights the engineering checks required for a complex BGA DSP rather than treating package similarity alone as proof of interchangeability.

直接替换替代料: TMS320C6421ZDUL ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: TMS320C6421ZDUL (相同外形与封装尺寸) ——差异在于 Core Supply Voltage, Package Type, Processor Architecture.

Texas Instruments
Core Supply Voltage: 1.2 V
Package Type: ZDU BGA
Processor Architecture: C64x+ very-long-instruction-word architecture
对比 TMS320C6421ZDUL →

TMS320C6421ZDU4

✅ 直接替换
Texas Instruments
📦 376-ball BGA (ZDU)
Fixed-point digital signal processor (DSP) · C64x+ very-long-instruction-word architecture · 400 MHz · 600 MHz · 1.2 V · 1.8 V or 3.3 V · 8 bit · 16 bit

联系询价

查看数据手册 →

TMS320C6421ZDUL 规格参数

Device Type 32-bit fixed-point digital signal processor
Listed Clock Frequency 400 MHz
Family Maximum Clock Frequency 600 MHz
Processor Architecture Advanced Veloci TI very-long-instruction-word (VLIW) architecture
Core Supply Voltage 1.05 V
Package Type 376-ball BGA (ZDU)
Package Dimensions 23 mm x 23 mm
Terminal Count 376 terminals
Exposed Pad Present
EMIFA Data Width 8 bit
DDR2 SDRAM Data Width 16 bit
DSP Platform TMS320C6000
DSP Family C64x+
安装类型 Surface mount

TMS320C6421ZDUL 23 mm x 23 mm 引脚配置指南

TMS320C6421ZDUL(23 mm x 23 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

TMS320C6421ZDUL 的 23 mm x 23 mm 封装引脚图

暂无详细引脚数据: TMS320C6421ZDUL.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TMS320C6421ZDUL 适用于 6 应用s: Industrial Control and Automation, Communications Infrastructure, Audio Signal Processing, Video and Imaging Processing, Radar and Test Equipment, Embedded Multimedia and Networked Control.

🏭

Industrial Control and Automation

The TMS320C6421ZDUL fits industrial control systems that execute filtering, motion algorithms, or sensor-conditioning calculations with deterministic timing. Its 32-bit fixed-point VLIW architecture provides substantial arithmetic throughput, while the 400 MHz listed operating frequency supports tightly sequenced control workloads. The 8-bit EMIFA can connect to asynchronous control devices and the 16-bit DDR2 interface can supply wider memory bandwidth for trajectory or signal histories. Board design must provide a stable 1.05 V core rail, complete BGA power distribution, and controlled high-speed memory routing.

🌐

Communications Infrastructure

TMS320C6421ZDUL is appropriate for communications equipment performing fixed-point filtering, modulation-related arithmetic, packet processing, and protocol transforms. The advanced Veloci TI VLIW architecture is designed for parallel operation, while the 16-bit DDR2 SDRAM interface provides bandwidth for buffers and working data. The 8-bit EMIFA can support slower asynchronous peripherals that do not require the DDR2 path. In a line-card design, engineers should isolate clocks and supplies carefully, validate DDR2 timing across temperature, and budget memory-controller and I/O power for worst-case traffic.

🎧

Audio Signal Processing

The TMS320C6421ZDUL can serve as the real-time processing engine in professional audio, communications audio, or active speaker systems that perform mixing, filtering, and dynamic processing. Its 32-bit fixed-point architecture supports high-throughput arithmetic, and its memory interfaces allow sample buffers and coefficient data to remain outside the processor. The 400 MHz listed frequency provides substantial instruction throughput for multi-channel processing. A practical implementation should use the manufacturer DDR2 reference layout, isolate sensitive analog sections, and verify bus timing and thermal behavior under sustained audio workloads.

📺

Video and Imaging Processing

TMS320C6421ZDUL is suitable for embedded image and video workloads requiring predictable fixed-point computation, including pixel transforms, filtering, and motion-related processing. Its external-memory architecture can accommodate frame buffers through the 16-bit DDR2 SDRAM interface, while the 8-bit EMIFA can accommodate lower-speed capture or control devices. The 376-ball BGA provides extensive connectivity but requires disciplined layer assignment and escape routing. Designers should use the manufacturer's reference design and pin table to confirm address, data, clock, and power connectivity before signal-path integration.

✈️

Radar and Test Equipment

TMS320C6421ZDUL fits radar, instrumentation, and test systems that perform high-rate sampling, digital filtering, spectral analysis, and real-time compensation. The VLIW architecture executes multiple arithmetic operations in parallel, and the 400 MHz listed device speed supports computationally dense fixed-point sequences. DDR2 bandwidth can support acquisition buffers, while EMIFA provides a separate route for control and auxiliary data. For accurate measurements, use deterministic clocking, short return paths, carefully filtered inputs, and timing validation across the required operating temperature range.

🖥️

Embedded Multimedia and Networked Control

The TMS320C6421ZDUL can combine real-time signal processing with networked control in industrial gateways, embedded media systems, and machine vision controllers. Its fixed-point execution model is effective for continuous data transformation, and its two external-memory interfaces provide flexibility for both DDR2 bandwidth and asynchronous peripheral access. Pairing the processor with a dedicated network controller allows communication tasks to remain separate from DSP workloads. Implementation should include thermal analysis of the exposed pad, DDR2 eye and timing checks, and software tests for cache, memory initialization, and peripheral handshaking.

What is the TMS320C6421ZDUL?
The TMS320C6421ZDUL is a Texas Instruments 32-bit fixed-point digital signal processor in the C64x+ family of the TMS320C6000 platform. The exact orderable device is listed at 400 MHz, uses a 1.05 V core supply, and is offered in a 376-ball BGA package measuring 23 mm by 23 mm. According to the manufacturer product page, the device family supports up to 600 MHz, an 8-bit EMIFA, and a 16-bit DDR2 SDRAM interface.
What are the key specifications of TMS320C6421ZDUL that engineers should know?
The key specifications are a 32-bit fixed-point architecture, 400 MHz listed frequency, 1.05 V core voltage, 376-ball BGA package, 8-bit EMIFA, and 16-bit DDR2 SDRAM interface. The device belongs to Texas Instruments' advanced Veloci TI VLIW processor family. According to the manufacturer product page, the broader TMS320C6421 family can operate up to 600 MHz, but the exact suffix-specific clock and electrical limits should be confirmed in the ordering information.
Where can I download the TMS320C6421ZDUL datasheet PDF?
The official TMS320C6421 datasheet can be accessed through Texas Instruments' product document page at https://www.ti.com/lit/gpn/TMS320C6421. The manufacturer product page at https://www.ti.com/product/TMS320C6421 provides ordering, parameter, quality, and support information. Use the manufacturer document for the complete pin list, timing tables, memory-interface requirements, electrical characteristics, and package drawings.
Where can I find the TMS320C6421ZDUL pinout?
The TMS320C6421ZDUL pinout is contained in the pin-configuration and terminal-information tables of the official Texas Instruments TMS320C6421 datasheet. The exact device uses a 376-ball ZDU BGA package with an exposed pad, so assigning PCB nets requires the complete ball map rather than a generic BGA diagram. Start with the manufacturer datasheet and then cross-check each ball against the selected DDR2, EMIFA, clock, power, ground, and control implementation.
Can TMS320C6421ZDU4 replace TMS320C6421ZDUL?
TMS320C6421ZDU4 is the closest identified same-footprint alternative because it uses the same TMS320C6421 device family and ZDU 376-ball BGA package. It is not enough to establish interchangeability by package name alone: clock grade, temperature grade, lead finish, ordering suffix, and qualification must match the original design. According to the manufacturer ordering documentation, verify these distinctions before treating it as a drop-in replacement.
What can replace TMS320C6421ZDUL?
TMS320C6421ZDU4 is the only clearly identified same-package replacement candidate for TMS320C6421ZDUL in the available cross-reference results. Because this is a 376-ball processor with extensive memory and power connections, a substitute must match the ball map, processor architecture, clock grade, voltage requirements, exposed-pad arrangement, and software compatibility. For a production redesign, complete a full pin, timing, thermal, and firmware validation rather than relying on family similarity alone.
What is the difference between TMS320C6421ZDUL and TMS320C6421ZDU4?
Both TMS320C6421ZDUL and TMS320C6421ZDU4 belong to the same Texas Instruments TMS320C6421 family and use the 376-ball ZDU BGA package. Their distinguishing orderable attributes must be checked in the manufacturer ordering table, particularly the suffix-specific clock, temperature, and commercial-versus-industrial classification. The available listing data does not expose all of those distinctions, so unconditional drop-in qualification is not appropriate.
TMS320C6421ZDUL vs TMS320C6421ZDU4: which is better for an industrial design?
TMS320C6421ZDU4 may be preferable when the original design requires the suffix-specific industrial grade, while TMS320C6421ZDUL corresponds to the exact listed commercial orderable device. The decision depends on the required ambient and junction temperatures, clock target, qualification requirements, and current availability. Use the manufacturer ordering table for both suffix definitions and confirm that the chosen part meets the enclosure temperature and production-qualification requirements.
When should I choose TMS320C6421ZDUL instead of TMS320C6421ZDU4?
Choose TMS320C6421ZDUL when its exact suffix-specific operating grade, clock rating, temperature range, and lifecycle configuration match the validated design. Choose TMS320C6421ZDU4 when its manufacturer-defined grade is preferable and the board-level requirements are otherwise equivalent. Since the processor uses a 376-ball BGA and extensive high-speed interfaces, any substitution should include ball-map review, memory timing validation, thermal analysis, and firmware regression testing.
Is TMS320C6421ZDUL suitable for DDR2 SDRAM designs?
Yes, TMS320C6421ZDUL is suitable for designs using the device's dedicated 16-bit DDR2 SDRAM interface. The same processor also provides a separate 8-bit EMIFA for asynchronous external memory. According to the manufacturer product description, these interfaces allow the C6421 to combine deterministic DSP execution with higher-bandwidth external-memory access, subject to the electrical and timing requirements in the datasheet.
What is the power-supply design concern for TMS320C6421ZDUL?
The primary power concern is delivering a stable 1.05 V core supply to this 376-ball DSP while controlling transient current and keeping every power and ground ball properly connected. According to the manufacturer datasheet, the BGA also includes an exposed pad that must be handled according to the prescribed land pattern and thermal design. Decoupling should be placed directly beneath the relevant supply and ground balls, with layer transitions and return paths planned for the EMIFA and DDR2 interfaces.
How should the TMS320C6421ZDUL BGA layout be designed?
The TMS320C6421ZDUL layout should be based on the exact 376-ball ZDU land pattern and the manufacturer PCB guidelines. Place power and decoupling structures close to their associated balls, provide continuous low-impedance power and ground distribution, and route DDR2 and EMIFA signals with the shortest practical paths. The exposed pad must be connected according to the package drawing and thermal design. Assembly capability, via-in-pad practice, solder-mask definition, and X-ray inspection should be reviewed before fabrication.
Where can I buy TMS320C6421ZDUL and check its lead time?
Use the Request a Quote form on this page to request current TMS320C6421ZDUL availability, lead time, and order confirmation. The form is the appropriate channel for quote-based sourcing and avoids static commercial information becoming obsolete. For technical qualification, confirm the exact suffix, package, clock grade, and lifecycle status against the official Texas Instruments part-details page before placing the order.
How much does TMS320C6421ZDUL cost?
Current commercial terms for TMS320C6421ZDUL should be requested through the Request a Quote form on this page. Pricing and inventory can vary with order quantity, sourcing condition, date, and traceable supply requirements, so a static figure is not included in the customer-facing technical description. The form lets the buyer request a current quotation for the exact 376-ball ZDU orderable device.
Is TMS320C6421ZDUL in stock?
Current inventory for TMS320C6421ZDUL should be confirmed through the Request a Quote form on this page. Availability can change quickly for large BGA processors, and a listing may not distinguish new, factory-sealed, programmed, or previously handled inventory. Specify required quantity, date code, traceability, packaging, and acceptable manufacturer condition in the request so the response reflects the exact procurement requirement.
Is TMS320C6421ZDUL RoHS, REACH, and AEC-Q100 compliant?
The RoHS, REACH, halogen-free, conflict-minerals, and automotive-qualification status of TMS320C6421ZDUL is not established by the available product excerpts, so those fields remain unknown. Do not infer automotive qualification solely from the exact suffix. Request the current manufacturer compliance and qualification documentation, and specify the required environmental and automotive process conditions before releasing the part into an end product.

工程参考数据: TMS320C6421ZDUL ——对比、设计指导和合规信息。

选型指南

Choose TMS320C6421ZDUL when the design has already been validated around the exact 400 MHz, 1.05 V orderable configuration and the manufacturer ordering suffix meets the required commercial or industrial operating conditions. Its 32-bit fixed-point VLIW architecture, 8-bit EMIFA, and 16-bit DDR2 SDRAM interface make it appropriate for deterministic filtering, multimedia, communications, and industrial-control workloads. Consider TMS320C6421ZDU4 only after confirming that its suffix-specific clock, temperature, qualification, and ordering details satisfy the design. No other drop-in alternative was established from the available cross-reference results. Because the processor uses a 376-ball BGA with extensive power and high-speed connections, changing orderable suffixes still requires full ball-map, timing, thermal, layout, and firmware validation.

与替代料对比

参数 本产品 TMS320C6421ZDU4
Brand Texas Instruments Texas Instruments
Package 376-ball BGA (ZDU), 23 mm x 23 mm 376-ball BGA (ZDU)
Processor Type 32-bit fixed-point digital signal processor TMS320C6421 family fixed-point digital signal processor
Architecture Advanced Veloci TI VLIW TMS320C6421 family advanced Veloci TI VLIW
DSP Platform TMS320C6000 TMS320C6000

关键差异点

  • Exact listed operating configuration (对比 TMS320C6421ZDU4)
  • Dedicated high-bandwidth external memory (对比 TMS320C6421ZDU4)
  • Large 376-ball integration (对比 TMS320C6421ZDU4)

设计说明

Design the 1.05 V core rail for both steady-state and transient processor demand, and follow the manufacturer's recommended decoupling network and ball assignments. Place each decoupling capacitor as close as practical to its associated power ball, with short ground returns and adequate layer transitions. Treat the exposed pad as both a thermal feature and a package-defined electrical connection; use the exact ZDU land pattern rather than a generic 376-ball BGA layout.

Route the 16-bit DDR2 SDRAM and 8-bit EMIFA interfaces according to the Texas Instruments reference layout, maintaining controlled reference planes and matched propagation behavior. Separate high-speed memory routing from sensitive analog inputs, place termination and damping only where supported by the device and reference design, and avoid unnecessary vias in signal breakout paths. Validate the escape-routing region with the selected PCB stack-up before releasing the layout.

Estimated thermal design must begin with the processor's actual clock, core voltage, external-memory activity, and local power dissipation because the available excerpts do not state a final thermal figure for this orderable suffix. Check the exposed-pad copper area, layer count, via pattern, airflow, and enclosure temperature against the manufacturer's power-dissipation and thermal data. Validate the assembled board at the highest expected ambient temperature and with sustained maximum processing load.

Do not treat same-package status alone as sufficient proof that a TMS320C6421 suffix can replace another. Check the complete manufacturer ordering table for clock grade, temperature grade, qualification, and ordering status, then compare the ball map, power sequencing, clocking, memory timing, and exposed-pad requirements. For a PCB redesign, preserve the original footprint and test access, and perform hardware and firmware regression testing before production release.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The available manufacturer and distributor excerpts do not establish the requested environmental or automotive compliance attributes. Request current manufacturer documentation for the exact orderable device and intended qualification process.

相关搜索

TMS320C6421ZDUL TMS320C6421ZDUL datasheet TMS320C6421ZDUL pinout TMS320C6421ZDUL datasheet pdf TMS320C6421ZDUL equivalent TMS320C6421ZDUL replacement TMS320C6421ZDUL vs TMS320C6421ZDU4 Texas Instruments TMS320C6421ZDUL TMS320C6421ZDUL 400MHz DSP TMS320C6421ZDUL 376 BGA TMS320C6421ZDUL DDR2 application TMS320C6421ZDUL price TMS320C6421ZDUL stock TMS320C6421ZDUL schematic

相关元器件 & 术语

Texas Instruments TMS320C6421ZDUL TMS320C6421ZDU4 TMS320C6421 TMS320C6000 C64x+ digital signal processor DSP fixed-point processor advanced Veloci TI VLIW architecture 32-bit arithmetic 400 MHz 600 MHz family maximum 1.05 V core supply EMIFA 8-bit EMIFA 16-bit DDR2 SDRAM interface 376-ball BGA ZDU package 23 mm by 23 mm package exposed pad industrial control communications infrastructure audio signal processing video and imaging processing
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情