TMS320C80GGP60 - 60MHz Floating-Point DSP | Texas Instruments
料号: TMS320C80GGP60 ✗ 停产TMS320C80GGP60 概述
A digital signal processor is a semiconductor optimized for arithmetic-intensive operations on continuously sampled signals. DSP processors combine hardware execution units, dedicated memories, and parallel data paths to accelerate filtering, transforms, modulation, and control algorithms. The TMS320C80 belongs to the DSP > digital signal processor > parallel-processing semiconductor hierarchy and uses a multiple-instruction, multiple-data architecture suited to telecommunications, industrial control, audio, and embedded signal-processing systems.
Key characteristics include floating-point arithmetic, 98 kB of integrated RAM, a 64-bit external data bus, and operation at 60 MHz. The wide external bus permits high-bandwidth transfers between the processor, external RAM, and data acquisition or network-interface circuitry. Its parallel computing resources are more relevant to sustained DSP workloads than the clock frequency alone, while the large BGA footprint exposes numerous parallel I/O and interconnection resources.
The device combines a parallel floating-point DSP with embedded control-oriented processing. This heterogeneous organization allows signal-processing loops and supervisory control tasks to be handled within one highly integrated device. Compared with a conventional microcontroller executing fixed-point arithmetic, the TMS320C80 provides dedicated floating-point processing resources and wider data paths for filters, transforms, and high-throughput embedded algorithms. Exact core architecture and memory-map details should be confirmed in the manufacturer datasheet.
Typical applications include digital communications equipment, speech and audio processing, industrial motor control, image or video acceleration, and embedded DSP modules. The 64-bit external data bus is particularly useful when an algorithm requires frequent movement of sample blocks between local and external memories. The 98 kB RAM can support working data and buffering, although the exact allocation depends on the memory architecture and system design.
A primary design consideration is the complexity of a 352-ball BGA layout. Escape routing, power-plane distribution, via-in-pad or via-under-bump requirements, and thermal management must be planned before schematic capture. Follow the manufacturer pin-connection and layout guidance, provide adequate decoupling across each supply domain, and verify signal integrity for high-speed external-memory connections.
This page consolidates the confirmed processor, memory, bus, and package characteristics with lifecycle information, application guidance, design cautions, and a traceable comparison framework. It is intended to support component screening and board-level planning without presenting unverified electrical limits, pin assignments, or replacement parts as established facts.
直接替换替代料: TMS320C80GGP60 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料TMS320C80GGP60 规格参数
| Processor Type | MIMD floating-point digital signal processor |
| Clock Frequency | 60 MHz |
| External Data Bus Width | 64 bit |
| On-Chip RAM | 98 kB |
| Package Type | 352-terminal BGA |
| Package Dimensions | 35 mm x 35 mm |
| Package Code | HLBGA |
| Package Shape | Square |
| Nominal Supply Voltage | 3.3 V |
| Terminal Count | 352 |
| Arithmetic Support | Floating point |
| Instruction Organization | MIMD |
| 接口类型 | Parallel |
| 安装类型 | Surface mount |
TMS320C80GGP60 square 引脚配置指南
TMS320C80GGP60(square 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: TMS320C80GGP60.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TMS320C80GGP60 适用于 7 应用s: Digital Communications, Industrial Motor Control, Audio Signal Processing, Industrial Automation, Speech and Audio Codec Interface, Image and Video Acceleration, Test and Measurement.
Digital Communications
The TMS320C80GGP60 fits legacy communications equipment requiring floating-point computation and sustained parallel data movement. Its 60 MHz MIMD execution, 98 kB of on-chip RAM, and 64-bit external data bus can support filtering, modulation, and block-processing functions where samples must be transferred efficiently between local and external memories. The 352-terminal HLBGA provides extensive connectivity, although the obsolete lifecycle status makes it primarily appropriate for maintenance of established platforms rather than new product launches.
Industrial Motor Control
The TMS320C80GGP60 can be used in embedded industrial control systems that combine real-time sampling with computationally intensive signal analysis. Floating-point processing supports control algorithms involving filtering, transforms, and dynamic compensation, while the 64-bit external bus can reduce bottlenecks when moving control and measurement data between external memory and peripherals. The design must include proper isolation, grounding, analog-interface protection, and a thermal strategy appropriate for the 35 mm square BGA package.
Audio Signal Processing
The TMS320C80GGP60 is suited to legacy audio-processing platforms that require deterministic parallel computation for filters, mixing, equalization, or spectral analysis. The 60 MHz floating-point core and 98 kB of RAM provide local resources for sample buffers and intermediate results, while the external bus can connect larger frame buffers. For a new product, compare its software maintenance burden and obsolete availability with a current audio DSP before committing the architecture.
Industrial Automation
Within an automation controller, the TMS320C80GGP60 can act as a dedicated real-time signal-processing engine for vibration analysis, condition monitoring, or feedback control. Its parallel MIMD organization is useful for workloads that divide filtering and transform operations across multiple processing elements, and the 98 kB of RAM can hold local operating windows. Integration requires careful attention to real-time interrupt latency, external-memory timing, and isolation between high-power and sensitive signal paths.
Speech and Audio Codec Interface
The TMS320C80GGP60 can support legacy speech-processing systems in which codec samples must be filtered, analyzed, and transferred through a parallel interface. Its 64-bit external data bus provides a wide path for block transfers, and its on-chip RAM can reduce pressure on shared external memory. The processor should be paired with an interface whose timing and signal levels are explicitly supported; audio-clock isolation, impedance control, and converter grounding remain separate analog-design requirements.
Image and Video Acceleration
The TMS320C80GGP60 can participate in embedded image or video systems that divide filtering, transform, or pixel-processing tasks across parallel DSP resources. Its floating-point arithmetic is useful for algorithms with dynamic numerical requirements, and the 64-bit external bus supports high-volume frame movement. Practical deployments must account for obsolete-device risk, external frame-buffer bandwidth, deterministic cache and memory behavior, and the complexity of laying out and thermally validating a 352-terminal BGA.
Test and Measurement
The TMS320C80GGP60 is applicable to legacy test and measurement instruments that perform real-time waveform analysis, filtering, or spectral computation. The 60 MHz parallel DSP architecture can process sample blocks while the 98 kB of RAM supports local buffering, and the wide external bus allows connection to acquisition logic or larger memories. Production adoption should include firmware validation, calibration retention, calibration traceability, and a long-term obsolescence plan for the processor.
工程参考数据: TMS320C80GGP60 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 352-terminal HLBGA, 35 mm x 35 mm |
| Brand | Texas Instruments |
| Clock Frequency | 60 MHz |
| Processor Architecture | MIMD floating-point DSP |
| External Data Bus | 64 bit |
| — | 98 kB |
| Nominal Voltage | 3.3 V |
| Terminal Count | 352 |
| Lifecycle Status | Obsolete |
| Mounting Type | Surface mount |
关键差异点
- Combines MIMD execution with floating-point arithmetic (对比 TMS320DM642AGDK7)
- Wide external memory interface for block-oriented signal processing (对比 TMS320C6713BZDP300)
- Substantial integrated working memory (对比 TMS320DM642AGDK7)
- Parallel MIMD organization supports concurrent processing (对比 TMS320C6713BZDP300)
设计说明
Treat the 352-terminal HLBGA as a high-density routing problem. Use the official Texas Instruments package drawing and land pattern for pad dimensions, solder-mask clearance, and ball numbering. Plan short escape routes before assigning board layers, maintain continuous reference planes beneath signal paths, and verify the manufacturing process can reliably achieve the specified ball pitch. Obtain the complete pin-assignment table before assigning any signal.
Implement the manufacturer’s complete supply network rather than assuming that the listed 3.3 V nominal value describes every rail. Separate the core and I/O requirements as documented, follow any required startup sequence, and place local high-frequency decoupling at the relevant supply balls. Confirm acceptable voltage tolerance and current limits from the datasheet before selecting regulators or magnetics.
The 35 mm square package can spread heat across a substantial area, but thermal performance still depends on the PCB copper, vias, enclosure, and nearby heat sources. Use the package thermal model to select copper area and via distribution, then validate the assembled board at the highest expected workload. Avoid placing heat-generating regulators or memory devices directly beneath areas with limited thermal paths.
External-memory traffic on the 64-bit bus must be routed with continuous reference planes and controlled-impedance geometry. Match trace lengths where the interface timing requires it, minimize stub effects and layer transitions, and keep switching currents away from sensitive analog sections. Validate the completed layout with signal-integrity simulation and, where possible, measured eye and timing margins.
Do not substitute a superficially similar DSP solely by clock speed, RAM capacity, or package ball count. A valid replacement must preserve electrical compatibility, pin functions, boot behavior, memory mapping, peripheral resources, and software assumptions. For an obsolete TMS320C80GGP60, secure written lifecycle and traceability information and preserve the original design documentation before committing any scarce stock to production.
合规信息
The lifecycle status is identified as obsolete in product listing information. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current Texas Instruments product or environmental documentation.