Texas Instruments

TMS320C82GGP60 - 60MHz MIMD DSP | Texas Instruments

料号: TMS320C82GGP60 ✓ 量产中
352-BGA Package 60 MHz Speed
最小起订量: 1 |

TMS320C82GGP60 概述

The Texas Instruments TMS320C82GGP60 is a 60 MHz floating-point digital signal processor with a 352-BGA package measuring 35 mm by 35 mm. It is a single-chip parallel MIMD processor capable of more than 1.5 billion RISC-like operations per second. The architecture combines one 32-bit master processor with two parallel processors, IEEE-754 floating-point support, a 4 KB instruction cache, and a 4 KB data cache for multimedia signal-processing workloads.

A digital signal processor is a specialized semiconductor that executes mathematically intensive algorithms in real time. Unlike a general-purpose processor optimized for sequential software, a DSP can distribute independent operations across parallel processing engines. The TMS320C82 belongs to the DSP, digital signal processor, parallel-processing, embedded processor, and semiconductor hierarchies, providing dedicated throughput for video, image, communications, and multimedia data streams.

The primary architectural feature is its parallel MIMD organization. The 32-bit master processor coordinates the two parallel processors, allowing multiple algorithm sections to operate concurrently. IEEE-754 floating-point arithmetic is suitable for filtering, transforms, scaling, and other calculations where integer-only arithmetic would require more software overhead. Separate 4 KB instruction and data caches reduce repeated memory transactions and help sustain the processor's stated operating rate of more than 1.5 billion RISC-like operations per second.

The TMS320C82GGP60 is identified specifically as a multimedia video processor, making its parallel architecture relevant to continuous multimedia workloads. The 60 MHz device should be evaluated for clock-dependent processing margins, while the large 352-BGA package requires careful PCB escape routing and thermal planning. Because no pin-level assignment table accompanies this product record, board designers must use the manufacturer pin-description table for every BGA ball and power-plane connection.

Typical implementation areas include video processing pipelines, image-filtering accelerators, communications-signal processing, industrial vision, embedded multimedia control, and audio DSP functions. The two parallel processors can be useful when a workload naturally divides into independent channels or processing blocks, although software partitioning, synchronization, and data movement determine whether the available parallelism produces useful gains.

The principal design trade-off is package complexity. A 352-BGA footprint offers extensive device connectivity but demands fine-pitch assembly, reliable escape routing, and careful layer planning. Confirm the manufacturer's recommended land pattern, power requirements, clock interface, external-memory connections, and decoupling guidance before schematic capture or PCB release.

This product page organizes the confirmed processor identity, package, clock rate, architecture, cache configuration, application fit, and replacement constraints into an engineering-focused reference. It also distinguishes a valid same-family speed-grade alternative from packages or devices that cannot be treated as true drop-in replacements.

直接替换替代料: TMS320C82GGP60 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

TMS320C82GGP100

✅ 直接替换 ⚠️ 规格未核验
📦 352-BGA (35x35)
Clock rating is 100 MHz versus 60 MHz, a 66.7% increase; package family and device architecture are the same, but timing and thermal behavior require validation

📋 参考替代料(不在目录中)

TMS320C82GGP60 规格参数

Device Type Floating-point digital signal processor (DSP)
Processor Architecture Single-chip parallel MIMD
Clock Frequency 60 MHz
Peak Processing Rate More than 1.5 billion RISC-like operations per second
Master Processor 32-bit RISC processor
Parallel Processors 2 units
Floating-Point Format IEEE-754
Instruction Cache 4 KB
Data Cache 4 KB
Package Type 352-BGA
Package Dimensions 35 mm x 35 mm
安装类型 Surface mount
Product Category Multimedia video processor

TMS320C82GGP60 35 mm x 35 mm 引脚配置指南

TMS320C82GGP60(35 mm x 35 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

TMS320C82GGP60 的 35 mm x 35 mm 封装引脚图

暂无详细引脚数据: TMS320C82GGP60.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TMS320C82GGP60 适用于 6 应用s: Multimedia Video Processing, Industrial Image Processing, Video Encoder and Decoder Acceleration, Communications Signal Processing, Audio DSP Processing, Embedded Multimedia Control.

📺

Multimedia Video Processing

The TMS320C82GGP60 fits parallel multimedia video workloads because it combines a 60 MHz clock, two parallel processors, IEEE-754 floating-point arithmetic, and more than 1.5 billion RISC-like operations per second. Independent filter, transform, or motion-estimation blocks can be partitioned across the parallel engines. The benefit depends on software scheduling: synchronization, external-memory latency, and data transfer overhead determine how much of the theoretical throughput reaches the application.

🏭

Industrial Image Processing

The TMS320C82GGP60 can support industrial image-filtering and inspection pipelines that require deterministic floating-point calculations and parallel execution. Separate image regions or processing channels can be assigned to the two parallel processors, while the 32-bit master processor coordinates the overall pipeline. Its 4 KB instruction cache and 4 KB data cache help reduce repeated memory traffic, although the design must account for external-memory bandwidth and deterministic synchronization.

📱

Video Encoder and Decoder Acceleration

The TMS320C82GGP60 is suited to multimedia encode, decode, and transform assistance because it is identified as a multimedia video processor with more than 1.5 billion RISC-like operations per second. IEEE-754 arithmetic provides a convenient numeric format for common signal transformations, while parallel processors can execute independent blocks. Clock-dependent tasks should be profiled at 60 MHz, and memory transactions should be minimized because the large BGA device still requires a carefully designed external data path.

🌐

Communications Signal Processing

The TMS320C82GGP60 can serve as a parallel signal-processing engine for communications subsystems that divide filtering, spectral, or adaptive calculations into independent tasks. Its two parallel processors and IEEE-754 floating-point support allow numerically intensive stages to run concurrently, while the master processor handles control flow and data coordination. For a production design, validate latency against the required frame or symbol rate and confirm that external-memory access does not become the limiting path.

🎧

Audio DSP Processing

The TMS320C82GGP60 can address audio DSP blocks that benefit from parallel floating-point execution, including filtering, mixing, spectral calculation, and dynamic processing. Its separate 4 KB instruction and data caches support rapid execution of cached DSP code, and the parallel processors can handle independent channels or algorithm stages. Real-time audio designs must establish a fixed processing budget at 60 MHz and verify that interrupt latency, memory bandwidth, and synchronization remain within the system timing specification.

🖥️

Embedded Multimedia Control

The TMS320C82GGP60 fits embedded multimedia systems that combine a coordinating control processor with parallel signal-processing engines. The 32-bit master processor can organize the workload, while the two parallel processors execute intensive operations associated with video, imaging, or communications. This division can simplify the partitioning of time-critical tasks, but firmware should include explicit synchronization, fault handling, and performance counters to detect contention in the shared memory system.

What is the TMS320C82GGP60?
The TMS320C82GGP60 is a Texas Instruments 60 MHz floating-point digital signal processor in a 352-BGA package. It uses a single-chip parallel MIMD architecture with one 32-bit RISC master processor and two parallel processors. According to the manufacturer product information, the device can execute more than 1.5 billion RISC-like operations per second and supports IEEE-754 floating-point arithmetic.
What are the key specifications of TMS320C82GGP60 that engineers should know?
The TMS320C82GGP60 combines a 60 MHz clock, more than 1.5 billion RISC-like operations per second, a 32-bit RISC master processor, two parallel processors, and IEEE-754 floating-point support. Its instruction and data caches are each 4 KB, while the device is packaged in a 35 mm by 35 mm 352-BGA. These specifications place it in the high-density parallel multimedia processing class.
What does MIMD mean in the TMS320C82GGP60 architecture?
MIMD means multiple-instruction, multiple-data, allowing the TMS320C82GGP60 to execute different instruction streams on separate data sets. The architecture contains a 32-bit master processor and two parallel processors. According to the manufacturer description, this organization is intended to exceed 1.5 billion RISC-like operations per second while processing independent work in parallel.
Is the TMS320C82GGP60 suitable for video processing?
The TMS320C82GGP60 is suitable for parallel video-processing workloads because Texas Instruments identifies it as a multimedia video processor. Its two parallel processors, 60 MHz clock, IEEE-754 arithmetic, and separate 4 KB caches can support filtering and transform operations. Actual throughput still depends on algorithm partitioning, memory access, synchronization overhead, and the external memory system.
Where can I find the TMS320C82GGP60 pinout?
The TMS320C82GGP60 pinout must be taken from the manufacturer pin-description table because its 352-BGA ball assignments are not reproduced here. Search the manufacturer documentation for TMS320C82 and identify the GGP60 ordering variant before assigning signals. Verify ball numbers, supply rails, ground balls, reserved pins, clock inputs, and memory interfaces against the exact package revision.
Where can I download the TMS320C82GGP60 datasheet PDF?
The TMS320C82GGP60 datasheet is available through the linked manufacturer-document page and the product listing identified for this device. Download the document corresponding to TMS320C82 and confirm that its package, clock, ordering information, and electrical tables cover the GGP60 variant. Use the document revision date to confirm that pin assignments and operating limits match the intended design.
What is the best drop-in replacement for TMS320C82GGP60?
The closest identified same-family drop-in option is the TMS320C82GGP100, which uses the same 352-BGA package but operates at a higher clock rate. A true drop-in decision still requires verification of voltage, memory, thermal, software, and timing compatibility. If firmware depends on 60 MHz timing, the faster replacement must be validated rather than assumed equivalent.
Can TMS320C82GGP100 replace TMS320C82GGP60?
TMS320C82GGP100 can serve as a same-package, same-family replacement candidate, but it is not an automatic functional substitution because its clock rating is higher than the target's 60 MHz rating. Confirm input-output timing margins, memory timing, thermal behavior, software assumptions, and the manufacturer ordering information before treating the change as a drop-in replacement.
TMS320C82GGP60 vs TMS320C82GGP100 - which is better for multimedia processing?
TMS320C82GGP100 is the better choice when higher clock headroom is useful and its timing remains compatible with the design; TMS320C82GGP60 is preferable when the system was validated specifically for a 60 MHz operating point. Both use the same 352-BGA package family, but the higher clock can alter bus timing, power behavior, and software timing assumptions.
When should I choose TMS320C82GGP60 over a faster TMS320C82 speed grade?
Choose TMS320C82GGP60 when the system requires the established 60 MHz operating point, validated timing, or a controlled power profile. A faster speed grade may improve scheduling margin but can require revised timing constraints, thermal validation, and firmware checks. The selection should follow worst-case processing time and interface timing rather than clock frequency alone.
Is TMS320C82GGP60 suitable for industrial vision and image processing?
The TMS320C82GGP60 can fit industrial vision and image-processing pipelines that benefit from parallel arithmetic and IEEE-754 support. Its two parallel processors can divide independent image regions or filter channels into separate tasks. Practical deployment still requires a real-time data path, adequate external memory bandwidth, deterministic synchronization, and a 352-BGA assembly process.
Where can I buy TMS320C82GGP60 online?
Use the Request a Quote form on this page to request TMS320C82GGP60 pricing, current inventory, minimum order quantity, and lead time. Quote requests allow the exact GGP60 ordering code and required delivery quantity to be checked before an order is placed, avoiding ambiguity with other TMS320C82 package, speed, or temperature variants.
What is the price of TMS320C82GGP60?
Current pricing for TMS320C82GGP60 is handled through the Request a Quote form on this page. Enter the required quantity and packaging preference so the exact MPN, current commercial terms, and available supply can be returned. Quote-based handling is preferable because pricing and lifecycle availability can change for this specialized DSP.
What is the lead time for TMS320C82GGP60 and is it in stock?
Current stock, minimum order quantity, and lead time for TMS320C82GGP60 should be confirmed through the Request a Quote form on this page. Include the target quantity and required shipment date in the request. The exact GGP60 ordering code is necessary because other TMS320C82 speed grades and package variants are not interchangeable procurement items.
What are the main PCB-layout challenges for the 352-BGA TMS320C82GGP60?
The 352-BGA package is the principal layout challenge because its fine-pitch balls require layer-stack planning, short escape routes, and careful fan-out between the component and supporting components. According to the manufacturer product information, the package measures 35 mm by 35 mm. Use the manufacturer land pattern and power-decoupling guidance rather than deriving ball geometry from the package outline alone.

工程参考数据: TMS320C82GGP60 ——对比、设计指导和合规信息。

选型指南

Choose TMS320C82GGP60 when the design was engineered around its 60 MHz timing, validated power profile, and established software behavior. It is appropriate for multimedia video, image-processing, communications-signal, and embedded parallel-processing systems that benefit from IEEE-754 arithmetic and two parallel processors. TMS320C82GGP100 is the relevant same-package speed-grade candidate when additional clock headroom is useful, but its 66.7% higher clock rating requires revised timing analysis, power review, thermal validation, and cycle-count checks. No cross-brand drop-in candidate was established. Other TMS320C82 ordering codes, older C8x processors, or devices with different package and interface arrangements should not be treated as drop-in replacements without a complete pin, electrical, memory, clock, thermal, and software compatibility review.

与替代料对比

参数 本产品 TMS320C82GGP100
Device Type 60 MHz floating-point parallel MIMD DSP 100 MHz floating-point parallel MIMD DSP
Brand Texas Instruments Texas Instruments
Package 352-BGA (35x35) 352-BGA (35x35)
Clock Frequency 60 MHz 100 MHz
Architecture Single-chip parallel MIMD Single-chip parallel MIMD
Master Processor 32-bit RISC processor 32-bit RISC processor
Parallel Processors 2 units 2 units
Floating-Point Format IEEE-754 IEEE-754
Instruction Cache 4 KB 4 KB
Data Cache 4 KB 4 KB

关键差异点

  • Validated 60 MHz operating point (对比 TMS320C82GGP100)
  • Same high-density package for board reuse (对比 TMS320C82GGP100)
  • Parallel multimedia processing architecture (对比 TMS320C82GGP100)

设计说明

Treat the 352-BGA escape routing as a stack-up design problem rather than a simple two-layer fan-out. Use the manufacturer land pattern, define the number of routing layers needed for external-memory and processor buses, and preserve short return paths beneath switching or high-speed signals. Review ball assignments, supply rails, ground balls, reserved balls, and assembly requirements from the exact TMS320C82 package documentation before releasing the footprint.

Plan separate power-distribution paths for the processor core and I/O domains using the manufacturer's voltage table and decoupling recommendations. Place the required high-frequency bypass capacitors directly at the corresponding supply and ground balls, with additional bulk capacitance positioned according to the reference power topology. Validate voltage tolerances and sequencing against the GGP60 operating limits before assigning clock, memory, or peripheral I/O voltages.

Calculate thermal performance from the actual processor power, ambient temperature, board construction, and the manufacturer junction-temperature limits. Estimated: dissipated power equals operating current multiplied by the applicable supply voltage, while junction temperature depends on that dissipation and the effective board-and-package thermal resistance. Confirm the required clock, voltage, and I/O activity because a higher operating point can change both dynamic and static power.

Route the clock source and external-memory interfaces for deterministic timing, with attention to return paths, impedance continuity, and crosstalk. Although the processor uses parallel RISC-like execution, poor memory topology or clock distribution can prevent the advertised throughput from improving real workloads. Use the manufacturer's interface timing tables to define constraints rather than deriving setup and hold requirements from the 60 MHz clock rate alone.

Do not assume that a same-package processor is an immediate drop-in replacement. The clock rate, voltage behavior, memory timing, initialization procedure, thermal margin, and software timing assumptions must all be checked. For the TMS320C82GGP100 candidate, specifically review designs that assume 60 MHz timing or use cycle-counted real-time routines, because the higher clock rate changes execution time and can alter interrupt and bus relationships.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No specific environmental, automotive, lead-free, halogen-free, or conflict-minerals status is confirmed for this ordering code.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

TMS320C82GGP60 datasheet TMS320C82GGP60 specifications TMS320C82GGP60 pinout TMS320C82GGP60 datasheet pdf TMS320C82GGP60 352 BGA Texas Instruments TMS320C82GGP60 TMS320C82GGP60 equivalent TMS320C82GGP60 replacement TMS320C82GGP60 cross reference TMS320C82GGP60 vs TMS320C82GGP100 TMS320C82GGP60 footprint TMS320C82GGP60 application circuit TMS320C82GGP60 price TMS320C82GGP60 stock 60MHz parallel MIMD DSP 352 BGA

相关元器件 & 术语

Texas Instruments TMS320C82GGP60 TMS320C82GGP100 digital signal processor DSP floating-point processor parallel processor MIMD multiple-instruction multiple-data RISC processor IEEE-754 instruction cache data cache 352-BGA BGA package 35 x 35 mm package surface-mount package multimedia video processor video processing image processing communications signal processing audio DSP 60 MHz clock embedded processor semiconductor
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情