Texas Instruments

TMS320VC5506GBB - 108MHz C55x Fixed-Point DSP | Texas Instruments

料号: TMS320VC5506GBB ✓ 量产中
179-ball NFBGA (GBB), 12 x 12 mm Package 108 MHz Speed
最小起订量: 1 |

TMS320VC5506GBB 概述

The Texas Instruments TMS320VC5506GBB is a low-power C55x fixed-point digital signal processor operating at 108 MHz in a 179-ball NFBGA package measuring 12 x 12 mm. It combines dedicated signal-processing hardware with a general-purpose processor architecture for communications, industrial control, audio, and embedded signal-chain applications.

A digital signal processor is a specialized semiconductor used to execute mathematical operations on sampled audio, communications, control, or sensing data in real time. Within the embedded processing hierarchy, the TMS320VC5506 belongs to the DSP > fixed-point DSP > C55x architecture > embedded signal-processing processor family. Its fixed-point architecture supports predictable arithmetic and efficient processing of real-time signal data.

The processor's principal documented characteristics include a 108 MHz operating frequency, fixed-point operation, low-power design, and a 179-pin NFBGA package. Its C55x architecture is intended to accelerate filtering, transform, modulation, speech, and other computationally intensive routines while retaining flexible control-flow capabilities for complete embedded signal-processing systems.

The GBB package provides 179 ball-grid terminals in a square 12 x 12 mm format. This high-density land pattern enables a compact implementation, but it requires careful PCB escape routing, solid ground and power distribution, and assembly-process control. Ball-grid packaging supports dense interconnection between the processor and external memory, which is valuable when system performance and board area are both important.

TMS320VC5506-based systems are suited to industrial communications equipment, speech and audio processing, modulation and demodulation, embedded control, signal analysis, and multichannel processing. System designers should select memory and peripheral configurations that match the processor's external interfaces, then validate signal integrity and thermal performance at the intended clock rate and operating temperature.

A key PCB-design responsibility is maintaining continuous supply and ground planes beneath the BGA. Follow the manufacturer's package, reference-routing, and assembly guidance, keep high-speed connections short where possible, and provide the required bypass capacitance close to power terminals. The footprint is footprint-equivalent to the historical MicroStar BGA arrangement described by Texas Instruments.

This product record combines the exact ordering information, package identification, and sourcing references for the TMS320VC5506GBB with practical guidance on migration, PCB implementation, and design trade-offs. It is intended to help engineers identify the correct C55x processor, verify legacy-board replacements, and plan assembly and supply-chain actions without changing the original land pattern unnecessarily.

直接替换替代料: TMS320VC5506GBB ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

TMS320VC5506G

✅ 直接替换
📦 179-NFBGA (GBB)
Same TMS320VC5506 device family and 179-ball nfBGA footprint; package difference is 0 balls, while device-specific qualification must be confirmed.

📋 参考替代料(不在目录中)

TMS320VC5506GBB 规格参数

Product Type Fixed-Point Digital Signal Processor (DSP)
Processor Architecture C55x
最大时钟频率 108 MHz
Instruction Set Fixed-point
Power Class Low power
Package Type 179-ball NFBGA (GBB), 12 x 12 mm
Terminal Count 179 balls
Terminal Form Ball
Package Shape Square
Temperature Grade Industrial
安装类型 Surface-mount BGA
RoHS 状态 Compliant

TMS320VC5506GBB square 引脚配置指南

TMS320VC5506GBB(square 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

TMS320VC5506GBB 的 square 封装引脚图

暂无详细引脚数据: TMS320VC5506GBB.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TMS320VC5506GBB 适用于 6 应用s: Industrial Communications, Audio and Voice Processing, Industrial Motor and Control Systems, Signal Analysis and Instrumentation, Power and Energy Monitoring, Embedded Sensor Processing.

🌐

Industrial Communications

The TMS320VC5506GBB fits communications equipment that requires deterministic fixed-point processing at 108 MHz. Its C55x architecture can support filtering, modulation, demodulation, framing, and buffer-management tasks without offloading them to a separate digital signal processor. The 179-ball NFBGA package also provides a high pin count for external memory and parallel peripheral connectivity. Engineers should base clock, memory-device, and bus timing decisions on the manufacturer datasheet and validate signal integrity at the intended clock rate.

🎧

Audio and Voice Processing

The 108 MHz fixed-point TMS320VC5506GBB is suitable for real-time audio filtering, voice analysis, mixing, and speech-processing functions. Fixed-point arithmetic provides an efficient implementation path for multiply-accumulate-heavy algorithms, while the DSP architecture supports deterministic execution through tightly timed interrupt service routines. The compact 12 x 12 mm NFBGA package conserves board area but requires careful escape routing and decoupling. Product qualification should include worst-case processing load, memory wait states, and thermal conditions.

🏭

Industrial Motor and Control Systems

TMS320VC5506GBB can serve as the computational core in industrial control systems that combine fast sampling with deterministic feedback algorithms. Its 108 MHz C55x architecture is well matched to fixed-point filtering, control-law evaluation, and digital signal conditioning, while the 179-ball package provides access to external memory and peripheral signals. Design teams should verify ADC and DAC timing, isolation boundaries, control-loop latency, and fault-response behavior at system level rather than relying only on processor clock rate.

🔧

Signal Analysis and Instrumentation

The TMS320VC5506GBB is appropriate for embedded signal-analysis instruments that must process waveforms under real-time constraints. At 108 MHz, the fixed-point C55x processor can execute filtering and transform-related routines while leaving deterministic task scheduling to the embedded control software. Its low-power positioning is beneficial in portable instrumentation, and the high-density NFBGA allows substantial interface density in a compact assembly. Users should evaluate memory bandwidth, acquisition timing, and numerical precision for the selected algorithm.

⚡

Power and Energy Monitoring

The TMS320VC5506GBB can process voltage and current measurements in energy-monitoring equipment that requires synchronized sampling and real-time calculation. Its 108 MHz fixed-point architecture is suitable for filtering, RMS or power-factor algorithms, event detection, and communication-data preparation. The 179-ball NFBGA package supports the external memory and communication connectivity typically needed for such systems. Safety-related designs should separate measurement certification from processor qualification and verify isolation, calibration, and response-time requirements independently.

🧩

Embedded Sensor Processing

TMS320VC5506GBB is suitable for sensor-processing nodes that combine acquisition, filtering, feature extraction, and local communication in one compact embedded platform. The 108 MHz fixed-point C55x engine provides deterministic arithmetic for vibration, acoustic, or condition-monitoring workloads, while the 12 x 12 mm NFBGA limits board footprint. Deployments should budget processor utilization under worst-case sampling rates, use controlled memory interfaces for deterministic behavior, and account for ball-grid assembly yield and inspection requirements during manufacturing.

What is the TMS320VC5506GBB?
The TMS320VC5506GBB is a low-power, 108 MHz C55x fixed-point digital signal processor in a 179-ball NFBGA package. Texas Instruments identifies the part as a fixed-point DSP, while the manufacturer ordering page specifies the GBB package as 179 pins in a 12 x 12 mm NFBGA. It is intended for embedded, real-time signal-processing systems that require efficient fixed-point arithmetic and a compact high-density land pattern.
What is the clock frequency of the TMS320VC5506GBB?
The TMS320VC5506GBB operates at up to 108 MHz. According to the Texas Instruments product page, the device is identified as a low-power C55x fixed-point DSP with a 108 MHz operating frequency. This clock rate determines the processor's instruction-cycle rate, although real application throughput also depends on memory behavior, instruction mix, peripheral configuration, and external bus activity.
Where can I download the TMS320VC5506GBB datasheet PDF?
The official TMS320VC5506 datasheet is available through the Texas Instruments product page at https://www.ti.com/product/TMS320VC5506. That page provides the manufacturer datasheet, revised to Revision C, together with technical documentation and ordering information. Use the manufacturer copy for pin assignments, electrical characteristics, memory interfaces, timing, and recommended PCB implementation details.
Where can I find the TMS320VC5506GBB pinout?
The TMS320VC5506GBB pinout is contained in the pin-assignment section of the official Texas Instruments TMS320VC5506 datasheet. The component uses a 179-ball NFBGA package in a 12 x 12 mm square format. Because a complete 179-ball assignment cannot be represented by a standard library diagram, consult the manufacturer pin table and land-pattern documentation before assigning PCB nets or performing board replacement.
Is TMS320VC5506GBB the same as TMS320VC5506?
TMS320VC5506GBB is the orderable package suffix for the TMS320VC5506 processor, not a different processor model. The GBB suffix identifies the 179-ball NFBGA package, and Texas Instruments lists the part at 108 MHz. When creating a BOM or checking a replacement, retain the exact GBB suffix if the existing PCB uses the 179-ball NFBGA land pattern.
What is the best drop-in replacement for TMS320VC5506GBB?
TMS320VC5506G is the closest identified same-family replacement candidate because the GB designation denotes the 179-ball NFBGA package used by the target. Texas Instruments describes the nfBGA redesign as footprint-equivalent to the historical MicroStar BGA and electrically equivalent in performance. Firmware, memory-map, clock, and peripheral compatibility must still be checked against the specific device revision before production release.
Can a TMS320VC5506G replace TMS320VC5506GBB?
TMS320VC5506G is a candidate only when the G suffix corresponds to the same 179-ball NFBGA implementation used on the target board. Texas Instruments states that the nfBGA package is footprint-equivalent to the MicroStar BGA and provides datasheet-equivalent electrical performance. Validate device-specific memory, peripheral, clock, and software requirements before treating it as a drop-in replacement.
TMS320VC5506GBB vs TMS320VC5506G - which is the correct package?
TMS320VC5506GBB is explicitly identified as a 179-pin NFBGA with package code GBB, so it is the correct ordering code when the board requires that footprint. TMS320VC5506G may also represent a 179-ball NFBGA configuration, but its exact package dimensions and terminal assignment must be confirmed against the manufacturer package drawing. Compare the PCB land pattern, ball map, and ordering table before substitution.
When should I choose TMS320VC5506GBB over another C55x processor?
Choose TMS320VC5506GBB when the design specifically requires the 108 MHz C55x processor in a 179-ball NFBGA land pattern and the associated TMS320VC5506 software and peripheral configuration. Consider another device only after comparing clock rate, memory interfaces, serial peripherals, package drawing, thermal limits, and software support. A processor with similar general-purpose functions is not automatically a board-level replacement.
Is TMS320VC5506GBB suitable for industrial signal-processing equipment?
The TMS320VC5506GBB is listed with an industrial temperature grade, making it appropriate for industrial designs when all electrical and environmental limits remain within the manufacturer specifications. Its 108 MHz fixed-point C55x architecture is suitable for real-time filtering, communications, control, and signal-analysis workloads. Final suitability depends on supply voltage, clock configuration, memory interface, environmental exposure, and system timing.
Where can I buy TMS320VC5506GBB and check its lead time?
Use the Request a Quote form on this page to ask about TMS320VC5506GBB availability, lead time, and the exact GBB package configuration. The manufacturer ordering page confirms the GBB package and 179-pin NFBGA format, while current channel availability can change with demand and inventory. Include the target quantity, date code requirements, and whether a documented obsolete-material authorization is acceptable.
How much does TMS320VC5506GBB cost?
Current commercial terms for TMS320VC5506GBB should be confirmed through the Request a Quote form on this page. The structured quote workflow accounts for quantity, package suffix, market availability, and supply conditions. For an existing legacy design, request the exact 179-ball NFBGA part rather than approving a similar C55x device solely by family name, because package and peripheral differences can affect compatibility.
Is TMS320VC5506GBB in stock?
Stock status for TMS320VC5506GBB should be confirmed through the Request a Quote form on this page. Because legacy DSP inventory can fluctuate, request the quantity and delivery schedule needed for production rather than relying on a family-level availability statement. Include any required date-code, traceability, or lifecycle-document requirements in the request.
What are the key specifications of TMS320VC5506GBB that engineers should know?
The key documented specifications are a 108 MHz clock, fixed-point C55x architecture, low-power positioning, and a 179-ball NFBGA package measuring 12 x 12 mm. The Texas Instruments ordering page identifies the exact GBB configuration and 179 pins, while the product page identifies the 108 MHz operating frequency. Memory capacity, voltage values, and detailed peripheral assignments must be taken from the manufacturer datasheet.
What does the TMS320VC5506GBB do in audio and communications systems?
The TMS320VC5506GBB executes real-time fixed-point signal-processing tasks associated with the C55x architecture. Typical workloads include filtering, modulation, demodulation, speech processing, and communications signal conditioning. Its 108 MHz operating rate supports high-throughput embedded processing, but achievable channel counts and sample rates depend on the algorithm, memory system, peripherals, and timing configuration.

工程参考数据: TMS320VC5506GBB ——对比、设计指导和合规信息。

选型指南

Choose TMS320VC5506GBB when an existing design explicitly requires the 108 MHz fixed-point TMS320VC5506 processor in a 179-ball NFBGA package. It is particularly appropriate for legacy communications, audio, industrial-control, and signal-analysis systems whose software and external interfaces were designed around the C55x architecture. TMS320VC5506G is the closest identified same-family alternative when its exact GBB package drawing and device characteristics match the original board. Do not substitute a different DSP merely because it has a similar clock rate; verify the complete pin and ball assignment, memory interface, voltage requirements, peripherals, thermal limits, and software support. For new designs, compare the TMS320VC5506 against current processors on total system cost, development effort, peripheral integration, memory requirements, and long-term software maintenance. For repair or obsolescence management, preserve the historical land pattern whenever electrically justified and obtain manufacturer approval before introducing a functionally similar but non-equivalent processor.

与替代料对比

参数 本产品 TMS320VC5506G
Brand Texas Instruments Texas Instruments
Package 179-NFBGA (GBB), 12 x 12 mm 179-NFBGA (GBB), 12 x 12 mm
Processor Architecture C55x C55x
Clock Frequency 108 MHz 108 MHz
Arithmetic Type Fixed-point Fixed-point
Power Class Low power Low power
Terminal Count 179 balls 179 balls
Package Footprint nfBGA footprint equivalent to MicroStar BGA nfBGA footprint equivalent to MicroStar BGA

关键差异点

  • Exact 108 MHz C55x processor configuration (对比 TMS320VC5506G)
  • Identical high-density package architecture (对比 TMS320VC5506G)
  • Documented footprint continuity for legacy designs (对比 TMS320VC5506G)

设计说明

Use the Texas Instruments 179-ball NFBGA land pattern and assembly guidance when laying out or repairing a PCB. Keep power and ground distribution continuous beneath the device, use short escape paths for high-speed signals, and place required bypass capacitors close to their associated terminals. Because the package has 179 balls, inspect the board for assembly bridging and confirm the exposed thermal behavior against the manufacturer's package drawing before release.

Do not approve a replacement solely because it belongs to the C55x family. Confirm the exact GBB land pattern, ball assignment, external memory compatibility, clock requirements, peripheral population, and software configuration. Texas Instruments states that the nfBGA package is footprint-equivalent to the historical MicroStar BGA, but package equivalence alone does not establish that every device variant has identical electrical limits or firmware behavior.

Validate memory and peripheral signal integrity with the operating clock, intended load, and production PCB stack-up. The 108 MHz processor clock does not directly specify every interface timing value, so use the datasheet timing diagrams and external-memory specifications. Keep sensitive analog interfaces physically separated from fast digital routing, observe the manufacturer's recommended grounding scheme, and test power-rail integrity with realistic processor activity.

Evaluate thermal performance using the processor's actual operating mode, supply voltage, clock activity, memory traffic, and enclosure temperature. The documented low-power positioning does not remove the need for a junction-temperature calculation. Verify that the PCB provides the intended heat-spreading copper and that the assembly process satisfies the manufacturer's handling and reflow requirements for the 12 x 12 mm NFBGA package.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The LCSC product listing identifies the TMS320VC5506GBB as RoHS compliant. No additional compliance declaration is established by the manufacturer snippets used for this record.

数据核验日期: 2026-11-19 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

TMS320VC5506GBB TMS320VC5506GBB datasheet TMS320VC5506GBB datasheet pdf TMS320VC5506GBB pinout TMS320VC5506GBB footprint TMS320VC5506GBB equivalent TMS320VC5506GBB replacement TMS320VC5506GBB cross reference Texas Instruments TMS320VC5506GBB TMS320VC5506GBB 108MHz DSP TMS320VC5506GBB 179 NFBGA TMS320VC5506GBB price TMS320VC5506GBB stock TMS320VC5506GBB vs TMS320VC5506G TMS320VC5506GBB industrial application

相关元器件 & 术语

Texas Instruments TMS320VC5506GBB TMS320VC5506G TMS320VC5506 C55x fixed-point digital signal processor DSP embedded processor semiconductor low-power processor 108 MHz 179-ball NFBGA GBB package 12 x 12 mm package BGA surface-mount package footprint-equivalent package MicroStar BGA fixed-point arithmetic real-time signal processing industrial control communications processing audio processing external memory interface RoHS
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情