TUSB8044RGCR - 4-Port 5Gbps USB 3.1 Hub | Texas Instruments
料号: TUSB8044RGCR ✗ 停产TUSB8044RGCR 概述
A USB hub controller is an interface integrated circuit that manages one upstream USB connection and multiple downstream ports. Within the semiconductor hierarchy, it belongs to the USB interface controller family, interface IC category, and broader integrated-circuit domain. Its function is to divide an upstream USB data path among connected peripherals while coordinating enumeration, power, status, and configuration across four external SuperSpeed ports.
The TUSB8044 provides four 5.0-Gbps SuperSpeed downstream ports and includes USB Billboard capability for presenting device identity and compatibility information. Configuration can be implemented with pin straps for supported functions, one-time-programmable ROM, an I2C EEPROM, or an I2C or SMBus slave interface for programmable PID, VID, port, and PHY configurations. These options support both standardized product identification and customized hub behavior.
The device also supports one Alternate mode, according to the Texas Instruments product page. In a system design, the upstream interface connects the hub to a host or another USB controller, while the four downstream ports connect external devices such as storage, peripherals, Ethernet adapters, or industrial interfaces. USB Billboard can make the hub appear as a useful interface to a connected USB-C host when a more appropriate class-specific presentation is unavailable.
Typical uses include industrial control panels, medical carts, test and measurement systems, embedded computers, docking stations, and multi-port peripheral hubs. The 9 mm by 9 mm VQFN package supports compact designs, but its 64-pin land pattern requires careful high-speed layout and complete ground-plane treatment.
For signal integrity, route all SuperSpeed differential pairs as controlled-impedance, length-matched connections with minimal stubs and continuous reference planes. Follow the Texas Instruments datasheet for the complete pin list, decoupling configuration, crystal or clock requirements, power sequencing, and layout geometry.
This page combines the verified manufacturer characteristics with practical USB layout guidance, sourcing information, comparison fields, and engineering-oriented selection notes. It also identifies where detailed electrical, timing, mechanical, and configuration values must be obtained directly from the manufacturer datasheet.
直接替换替代料: TUSB8044RGCR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: TUSB8044RGCR (相同外形与封装尺寸) ——差异在于 Maximum Data Rate, Package, Supply Voltage.
该产品暂无直接替换替代料。
请求替代料TUSB8044RGCR 规格参数
| Device Type | 4-port SuperSpeed USB 3.1 hub controller |
| Number of USB Ports | 4 downstream ports |
| Maximum Data Rate | 5.0 Gbps |
| USB Protocol | USB 3.1 SuperSpeed |
| Host Interface | I2C |
| Billboard Support | Supported |
| Alternate Modes Supported | 1 |
| 电源电压 | 1.1 V and 3.3 V |
| 工作温度 | 0 C to +70 C |
| 封装 | 64-pin VQFN (RGC), 9 mm x 9 mm |
| 引脚数量 | 64 pins |
| 安装类型 | Surface mount |
| Configuration Method | Pin straps, OTP ROM, I2C EEPROM, or I2C/SMBus slave interface |
| Product Status | Not for new designs |
TUSB8044RGCR 64-pin vqfn (rgc), 9 mm x 9 mm 引脚配置指南
TUSB8044RGCR(64-pin vqfn (rgc), 9 mm x 9 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: TUSB8044RGCR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TUSB8044RGCR 适用于 6 应用s: Industrial Control Hub, Medical Equipment Cart, Test and Measurement System, Embedded Computing Docking Station, Peripheral Charging and Data Hub, Networked USB Adapter.
Industrial Control Hub
The TUSB8044RGCR fits an industrial control system that must connect several USB peripherals to a single host controller. Its four downstream SuperSpeed ports operate at up to 5.0 Gbps, allowing the same controller to support storage, data acquisition, configuration interfaces, and service connections. The I2C host interface supports coordinated device configuration, while pin straps or serial EEPROM can establish a repeatable configuration in a fixed production design. Use the 64-pin RGC footprint on a multilayer board with uninterrupted return paths beneath every SuperSpeed differential pair. The 0 to 70 C rating covers many indoor industrial environments, but temperature, surge, isolation, and EMC requirements must be verified at the system level.
推荐
Medical Equipment Cart
The TUSB8044RGCR can consolidate several peripheral connections in a medical equipment cart built around a USB host. Four 5.0-Gbps SuperSpeed downstream ports can serve diagnostic peripherals, imaging storage, a barcode reader, and a networked instrument without requiring four independent host ports. USB Billboard provides a way to present interface information when required by the host software, while PID and VID customization can identify the hub as part of a controlled medical system. Electrical isolation, patient-safety boundaries, ESD protection, and regulatory validation remain system-level responsibilities. Confirm the exact USB class drivers and operating system behavior, and implement the manufacturer power and layout recommendations without substituting generic hub firmware assumptions.
推荐
Test and Measurement System
The TUSB8044RGCR is suitable for a test and measurement chassis that connects instruments, analyzers, and service peripherals to one embedded host. The four SuperSpeed ports provide up to 5.0 Gbps per link for burst-heavy storage and instrument data, while the I2C interface permits configuration through EEPROM or a controlling slave device. Pin straps are useful where the port and PHY configuration is fixed, whereas OTP, EEPROM, or serial customization supports product variants without changing the PCB. Keep copper and via stubs short, provide continuous reference planes under differential routes, and follow the manufacturer reference layout. Validate connector ESD protection separately so that protection-network capacitance does not degrade USB signal integrity.
推荐
Embedded Computing Docking Station
The TUSB8044RGCR can serve as the four-port SuperSpeed hub inside an embedded docking station. One upstream connection to the embedded computer allows external storage, network adapters, security keys, and human-interface devices to share the host's USB budget. USB 3.1 operation at up to 5.0 Gbps preserves high-throughput links when a device supports that speed, and Billboard capability can improve how the hub is identified by the host. The compact 9 mm by 9 mm VQFN package supports dense connector placement, although its 64 leads and exposed thermal pad require careful fanout. Configure PID, VID, and port behavior according to the final operating system image, then test enumeration across every supported peripheral combination.
推荐
Peripheral Charging and Data Hub
The TUSB8044RGCR can anchor a professional peripheral hub that combines data connections with device-charging behavior. Texas Instruments identifies pin-strap battery-charging support and configurable port functions, allowing one hub design to cover both data and power-oriented accessories. The four 5.0-Gbps SuperSpeed ports retain high data bandwidth, while programmable PID, VID, and PHY settings can tailor product behavior. Supply design must follow the exact datasheet power topology and ensure that downstream power budgets do not overload regulators or protection circuits. Decoupling, distribution, and return-current paths should be planned together with USB routing. Validate charging current, thermal rise, enumeration stability, and cable compatibility across the complete accessory ecosystem rather than testing only data transfer.
推荐
Networked USB Adapter
The TUSB8044RGCR is useful in a compact USB-to-network adapter or protocol-conversion appliance that needs several external USB channels rather than only one. A host can connect to the hub while Ethernet-facing or embedded interface circuitry manages the actual data exchange, allowing legacy peripherals to participate in a modern network architecture. USB Billboard can provide identity information during host discovery, and I2C EEPROM or slave programming supports differentiated product identifiers. The 0 to 70 C range is appropriate for many indoor appliances, but sustained USB traffic can increase controller and regulator thermal loading. Use short, impedance-controlled SuperSpeed routes, maintain adequate copper around the RGC package, and qualify the complete adapter for electromagnetic interference and ESD requirements applicable to its installation environment.
推荐
推荐产品汇总
工程参考数据: TUSB8044RGCR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Device Type | 4-port SuperSpeed USB 3.1 hub controller |
| Number of Downstream Ports | 4 ports |
| Maximum Data Rate | 5.0 Gbps |
| Host Interface | I2C |
| USB Billboard | Supported |
| Alternate Modes | 1 |
| Supply Voltage | 1.1 V and 3.3 V |
| Operating Temperature | 0 C to +70 C |
| Package | 64-pin VQFN (RGC), 9 mm x 9 mm |
| Brand | Texas Instruments |
关键差异点
- Four SuperSpeed ports with Billboard identification (对比 TUSB8044RGCT)
- Flexible identity and port configuration (对比 TUSB8044ARGCT)
- Compact high-speed hub integration (对比 TUSB8042)
设计说明
Implement every 5.0-Gbps SuperSpeed pair as a continuously referenced differential route on an inner layer. Match differential impedance to the value specified by the manufacturer datasheet, match pair lengths within the documented tolerance, and eliminate vias where practical. Do not route over split power-plane boundaries. If a via is unavoidable, use matched via geometry on both conductors and review the resulting discontinuity with the manufacturer's layout guidance.
Separate the 1.1 V and 3.3 V rail distribution and place the manufacturer-specified bypass capacitors directly beside their corresponding power pins. Keep high-current switching paths and connector return currents away from the hub's quiet supply nodes. Verify startup sequencing, maximum supply tolerance, downstream-current limits, and capacitor effective capacitance across temperature. The exposed pad requires the datasheet's recommended copper and thermal-via pattern.
Use the 64-pin RGC footprint from the current Texas Instruments package drawing and confirm pin 1 orientation against the PCB library before release. Avoid placing test points, through-hole leads, or tall connectors beneath the device unless their mechanical clearance has been checked. Fan out the USB pairs directly from their associated pins so that no other signal interrupts the high-speed escape path.
Do not treat a same-family ordering code as automatically interchangeable without checking the exact suffix, temperature grade, package drawing, and tape format. In particular, TUSB8044RGCR is identified as not for new designs, so new programs should confirm lifecycle status and consider a supported device family. Changes to the PID, VID, PHY, or Alternate-mode configuration can also alter host behavior even when the PCB remains unchanged.
合规信息
The manufacturer product page and distributor listing do not expose complete compliance declarations in the verified material. Confirm RoHS, REACH, lead-free, halogen-free, and automotive qualification directly from current TI product documentation before qualification.