VSC7416XKT-01 - 6-Port Carrier Ethernet Switch | Microchip
料号: VSC7416XKT-01 ✗ 停产VSC7416XKT-01 概述
A Carrier Ethernet switch is a specialized Ethernet interface integrated into access, aggregation, and transport equipment. Unlike a general-purpose desktop Ethernet switch, a carrier-grade device is selected for telecommunications packaging, port density, network-management requirements, and compatibility with service-provider transport functions. Within the equipment hierarchy, the VSC7416XKT-01 sits between Line Cards and carrier Ethernet ports, converting electrical network traffic into a multiport switching resource for telecommunications systems.
The primary feature set includes six ports, 10/100/1000-Mbps operation, and a 284-pin TQFP package. Its high pin count supports the extensive connections required by a carrier Ethernet switching function, including network interfaces, control, power, configuration, and support circuitry. Because the package is physically large, designers must preserve adequate copper area and follow the manufacturer's land pattern and thermal recommendations during PCB layout.
This component belongs to Microchip's VSC7416 product family, identified on the manufacturer page as a six-port Carrier Ethernet switch. The related documentation search identifies the family as a Layer-2 Carrier Ethernet platform with MPLS/MPLS-TP support and VeriTime. These functions place the device at the network-forwarding layer, where traffic is handled according to Layer-2 information rather than being treated as a simple physical interface. The exact enabled feature set for each board design should be checked against the applicable configuration and software documentation.
Typical uses include telecommunications line cards, access-node equipment, Ethernet aggregation systems, industrial network gateways, and carrier Ethernet test equipment. The six-port arrangement can reduce the number of discrete switching devices required on a board while supporting a mix of 10-Mbps, 100-Mbps, and 1-Gbps links. It is most appropriate when a system needs carrier-oriented Layer-2 switching in a substantial multi-pin package rather than a compact two-port or four-port Ethernet controller.
A principal design consideration is lifecycle management. The VSC7416 family is marked End of Life, making the VSC7416XKT-01 appropriate for maintaining an existing qualified design rather than treating it as the default choice for a new platform. Confirm pin assignment, signal timing, power sequencing, thermal performance, and software support using the manufacturer datasheet before schematic capture or PCB release.
This product record combines the exact package and Ethernet characteristics, lifecycle status, sourcing information, design guidance, and a conservative replacement assessment. It distinguishes verified drop-in interchangeability from merely similar Ethernet devices, helping engineers identify whether a redesign, firmware adjustment, or qualified alternate device is required before procurement.
直接替换替代料: VSC7416XKT-01 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料VSC7416XKT-01 最大额定值与电气特性
| Product Type | Carrier Ethernet Switch |
| Port Count | 6 ports |
| Supported Ethernet Speeds | 10 Mbps, 100 Mbps, and 1 Gbps |
| Device Family | VSC7416 |
| 封装 | 284-lead TQFP, 24 x 24 mm |
| 安装类型 | Surface mount |
| 引脚数量 | 284 pins |
| Switching Layer | Layer 2 |
| MPLS Support | MPLS/MPLS-TP support |
| Time Synchronization | VeriTime |
| Product Lifecycle Status | End of Life |
| Maximum Ethernet Data Rate | 1 Gbps per supported port |
VSC7416XKT-01 284-lead tqfp, 24 x 24 mm 引脚配置指南
VSC7416XKT-01(284-lead tqfp, 24 x 24 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: VSC7416XKT-01.
请参阅 数据手册 以查看完整引脚配置。
典型应用
VSC7416XKT-01 适用于 6 应用s: Carrier Ethernet Line Cards, Telecommunications Access Nodes, Layer-2 Ethernet Aggregation, Industrial Network Gateways, Carrier Ethernet Test Equipment, Synchronized Carrier Networks.
Carrier Ethernet Line Cards
VSC7416XKT-01 fits telecommunications line cards that require six Layer-2 Ethernet ports in a single switching device. The available 10-Mbps, 100-Mbps, and 1-Gbps rates support a mixture of service access and aggregation links, while the family-level MPLS/MPLS-TP support is relevant to carrier transport designs. Its 284-lead TQFP package provides the physical pin count needed for a complex switching function. Because the VSC7416 family is End of Life, this application is best suited to sustaining a qualified line-card design or a controlled migration project.
推荐
Telecommunications Access Nodes
VSC7416XKT-01 can serve as the central Ethernet switching element in an access-node chassis where several copper ports must be aggregated at Layer 2. Its six-port configuration reduces the component count compared with multiple isolated interface devices, and support for 10, 100, and 1,000 Mbps accommodates legacy service ports alongside Gigabit Ethernet uplinks. Designers should use the manufacturer pinout, reference schematic, and software configuration guide to implement media interfaces, synchronization, and thermal copper correctly.
推荐
Layer-2 Ethernet Aggregation
VSC7416XKT-01 is appropriate for aggregation equipment that collects several Ethernet service links before forwarding traffic through a higher-capacity uplink. The six-port arrangement gives a board designer a concentrated switching resource, while the Layer-2 classification supports carrier Ethernet forwarding behavior. MPLS/MPLS-TP support associated with the family can support packet transport workflows, subject to the exact firmware and hardware configuration. The large 284-pin TQFP footprint requires a multilayer PCB with careful routing and thermal planning.
推荐
Industrial Network Gateways
VSC7416XKT-01 can be evaluated in industrial gateways that combine several 10/100/1000-Mbps Ethernet links with carrier-oriented Layer-2 behavior. The six-port device provides a centralized switching function in equipment such as edge routers, protocol gateways, and industrial communication concentrators. Engineers must verify environmental temperature requirements, electrical isolation strategy, thermal margin, and software support before using an End of Life component in a new industrial platform. In most greenfield programs, a currently supported switch with a documented migration path is preferable.
推荐
Carrier Ethernet Test Equipment
VSC7416XKT-01 is relevant to carrier Ethernet test systems that require multiple Layer-2 ports for traffic generation, traffic analysis, service emulation, or loopback testing. Six ports allow a compact test module to combine 10-Mbps, 100-Mbps, and 1-Gbps scenarios without relying on separate switch devices. The 284-lead TQFP package simplifies access to numerous configuration and status signals but demands careful board space and power planning. Confirm the licensed feature set and synchronization configuration before adapting a production switch into test equipment.
推荐
Synchronized Carrier Networks
VSC7416XKT-01 may fit a synchronized carrier network design that combines Layer-2 forwarding with VeriTime-related time-synchronization functionality. The six-port switching arrangement can support timing distribution and service handoff across copper Ethernet interfaces in telecommunications equipment. Clocking topology, jitter performance, recovered-clock options, and the exact synchronization feature set must be confirmed in the manufacturer documentation. The design also needs a robust power structure because a 284-lead communications IC requires careful decoupling, grounding, and thermal review.
推荐
推荐产品汇总
工程参考数据: VSC7416XKT-01 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Microchip Technology |
| Package | 284-lead TQFP, 24 x 24 mm |
| Port Count | 6 ports |
| Supported Ethernet Speeds | 10 Mbps, 100 Mbps, and 1 Gbps |
| Switching Layer | Layer 2 |
| MPLS/MPLS-TP Support | Supported by the VSC7416 family |
| Time-Synchronization Feature | VeriTime |
| Lifecycle Status | End of Life |
关键差异点
- Six-port Carrier Ethernet integration (对比 VSC8574XKS-02)
- Carrier transport feature family (对比 VSC7421XJQ-02)
- Multi-rate copper Ethernet support (对比 VSC8514XMK-14)
- Legacy-platform continuity (对比 VSC7421XJQ-02)
设计说明
Implement the 284-lead TQFP footprint directly from the manufacturer land pattern rather than adapting a smaller TQFP symbol. Preserve pin numbering, exposed power and ground connectivity, test points, and high-speed differential pairs. The 24 x 24 mm body requires careful placement and escape routing; a multilayer board is generally more practical than a dense two-layer implementation. Verify component placement against the manufacturer's reference design and assembly guidance.
Follow the manufacturer guidance for supply rails, decoupling, and power sequencing. Separate the connections required for the digital, analog, and communications portions of the device according to the datasheet, and place the specified ceramic decoupling capacitors close to their associated pins. Avoid sharing high-current return paths beneath the switching IC. Confirm the complete power budget because the total dissipation depends on port activity, PHY configuration, voltage, and ambient temperature.
Estimate junction temperature from actual board construction rather than package size alone. Use the manufacturer's thermal parameters and the actual copper area, via count, airflow, enclosure temperature, and expected port loading. Validate the worst case with sustained maximum data traffic, because switching activity can increase power dissipation. Maintain unobstructed airflow around the large TQFP package and review adjacent hot components for local thermal coupling.
Route Ethernet differential pairs as controlled-impedance transmission lines with continuous reference planes and minimal stubs. Keep clocks, high-speed data, and sensitive analog paths separated from noisy switching and power-conversion nodes. Follow the manufacturer spacing and layer-transition guidance for each Ethernet speed supported by the design. Add appropriate test points for synchronization, management, and recovery functions without compromising the high-speed signal topology.
Do not treat the VSC7416 family identifier as a complete orderable MPN, and do not assume that a related VSC7421 or VSC8574 device is interchangeable with VSC7416XKT-01. Port count, package lead count, PHY features, pin assignments, and software configuration can differ even within the same product family. For an End of Life device, verify the exact suffix, revision, software support, lot traceability, and last-time-buy implications before committing the design.
合规信息
No definitive component-level compliance declaration is included in the product information. Confirm RoHS, REACH, lead-free, halogen-free, and automotive qualification status for the exact VSC7416XKT-01 lot with Microchip before release.