VSC8115XYA-T - 622 Mbps Clock Recovery Unit | Microchip
料号: VSC8115XYA-T ✓ 量产中VSC8115XYA-T 概述
A clock recovery unit is a specialized timing IC used in high-speed digital communication systems. Its role within the optical-transceiver hierarchy is to extract or recover a usable clock from a serial data stream when the transmitted signal no longer carries a separate clock conductor. Clock recovery units support communication infrastructure by helping downstream digital logic operate from a timing reference synchronized to the incoming data.
The VSC8115XYA-T is identified as a single-channel, 622 Mbps device with one output. Its principal documented characteristics are its 622 Mbps operating rate, one recovered output, 20-pin TSSOP construction, and lead-free tape-and-reel delivery format. These details position it for SONET/SDH, DWDM, and related telecom signal-conditioning designs where a dedicated recovery function is required.
Clock recovery differs from ordinary clock generation because the IC must derive stable timing from a data stream that may have accumulated timing variation. In a practical optical communication path, a recovered clock can feed parallelizing logic, a descrambler, a retimer, or another digital processing block. Correct implementation depends on the interface requirements of the surrounding equipment, including data rate, reference-clock arrangement, logic level, and jitter tolerance.
Typical uses include 622 Mbps line-card interfaces, SONET/SDH transport equipment, DWDM optical networking, telecommunications test equipment, and clock-recovery sections of optical transceivers. The 20-pin TSSOP package also allows reuse of board layouts intended for compatible 20-pin clock-and-timing devices. The VSC8115XYA-06-T is a closely related family member listed at the same 622 Mbps operating point.
Before laying out a replacement board, verify the complete pin arrangement, electrical limits, reference requirements, and timing behavior in the Microchip manufacturer datasheet. A mechanically similar 20-pin package alone does not establish signal compatibility, especially for a clock-recovery interface whose internal architecture and pin functions must match the original design.
This product page combines the verified 622 Mbps and 20-pin TSSOP characteristics with family-level alternatives, application guidance, and design checks that support faster component selection and board-level planning.
直接替换替代料: VSC8115XYA-T ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
VSC8115XYA-06-T
✅ 直接替换📋 参考替代料(不在目录中)
VSC8115XYA-T 规格参数
| Device Type | Clock Recovery Unit (CRU) |
| Operating Data Rate | 622 Mbps |
| Channel Count | 1 channel |
| Output Count | 1 output |
| Application Classification | Application-specific clock and timing IC |
| Communication Standard | SONET/SDH |
| Optical Multiplexing Application | DWDM |
| 封装 | 20-pin TSSOP |
| Package Body Dimensions | 4.40 mm x 6.50 mm |
| Lead-Free Status | Lead-free |
| Shipping Format | Tape and reel |
| Manufacturer Lifecycle Status | In Production |
VSC8115XYA-T 4.40 mm x 6.50 mm 引脚配置指南
VSC8115XYA-T(4.40 mm x 6.50 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: VSC8115XYA-T.
请参阅 数据手册 以查看完整引脚配置。
典型应用
VSC8115XYA-T 适用于 6 应用s: SONET/SDH Line-Card Interfaces, DWDM Optical Transport Equipment, Optical Transceiver Clock Recovery, Telecommunications Test Equipment, High-Speed Digital Backplane Interfaces, Dense WDM Network Equipment.
SONET/SDH Line-Card Interfaces
The VSC8115XYA-T fits a 622 Mbps SONET/SDH line-card interface because it is identified as a single-channel clock recovery unit with one output. It can provide recovered timing to digital logic that needs a clock related to the incoming serial data. Its documented 622 Mbps rate and 20-pin TSSOP package support compact telecom board layouts. Integration requires checking the manufacturer datasheet for reference-clock, supply, input-signal, and output-termination requirements before the PCB is released.
推荐
DWDM Optical Transport Equipment
The VSC8115XYA-T is suitable for a DWDM transport subsystem requiring clock recovery at the 622 Mbps class. The device combines one recovery channel with one recovered-clock output, making it appropriate for timing sections of optical transport boards. Its SONET/SDH and DWDM classification is explicit in the Microchip product-page summary. Engineers should verify the complete timing interface and external component requirements in the manufacturer datasheet before integrating it with line-card logic.
推荐
Optical Transceiver Clock Recovery
The VSC8115XYA-T can support a clock-recovery stage within a 622 Mbps optical transceiver or its surrounding line-card electronics. By producing one recovered output, it gives downstream logic a timing reference derived from the received data path. The 20-pin TSSOP format is useful where board density matters, while the single-channel architecture matches one data stream. Signal conditioning, reference routing, and output loading must follow the exact manufacturer application guidance.
推荐
Telecommunications Test Equipment
The VSC8115XYA-T is applicable to telecom test equipment that generates or analyzes 622 Mbps SONET/SDH-class traffic. Its recovered-clock output can support timing checks, pattern interfaces, or instrumentation that requires synchronization to a serial data stream. The 20-pin TSSOP package facilitates integration into multi-channel test systems where each lane may use a dedicated recovery device. Calibration and loopback behavior should be established using the manufacturer's specified test setup.
推荐
High-Speed Digital Backplane Interfaces
The VSC8115XYA-T may be evaluated for a 622 Mbps backplane interface that needs clock recovery from received data. Its single recovered output can feed a deserializer, retimer, or controller when the selected system architecture uses data-derived timing. The device is not a general-purpose clock generator; the design must provide the reference and signal environment required by the clock recovery unit. Confirm trace topology, impedance, and timing margins in the manufacturer documentation.
推荐
Dense WDM Network Equipment
The VSC8115XYA-T aligns with dense wavelength division multiplexing equipment because DWDM is one of its stated application categories and the supported rate is 622 Mbps. In such equipment, recovering timing from each data path can help the receiving subsystem remain synchronized before higher-layer processing. The one-channel, one-output architecture is suitable for a per-lane timing function. Final deployment requires evaluation of jitter, reference quality, and interface timing against the Microchip manufacturer datasheet.
推荐
推荐产品汇总
工程参考数据: VSC8115XYA-T ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | VSC8115XYA-06-T |
|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP |
| Brand | Microchip Technology | Microchip Technology |
| Device Type | Clock Recovery Unit (CRU) | Clock and Data Recovery IC |
| Operating Data Rate | 622 Mbps | 622 Mbps |
| Channel Count | 1 channel | 1 channel |
| Output Count | 1 output | 1 output |
| Communication Application | SONET/SDH and DWDM | SONET/SDH and DWDM |
关键差异点
- Verified 622 Mbps single-output recovery function (对比 VSC8115XYA-06-T)
- Application-specific SONET/SDH and DWDM positioning (对比 VSC8115XYA-06-T)
- Compact lead-free 20-pin TSSOP implementation (对比 VSC8115XYA-06-T)
设计说明
Use the exact 20-pin TSSOP land pattern and the exposed package information shown in the Microchip manufacturer datasheet. Keep the clock input, data input, recovered output, reference connections, and ground pins according to the prescribed pin table. Place any required bypass or interface components close to their associated pins, and preserve the recommended return paths to minimize timing disturbance and crosstalk.
Treat the 622 Mbps clock and data paths as controlled-impedance interfaces. Use the manufacturer's recommended termination, coupling, and reference-clock topology rather than relying on generic impedance values. Keep sensitive timing nets away from noisy switching nodes, preserve short return paths, and validate the completed board for rise time, jitter, crosstalk, and clock-output integrity.
Do not assume that the 20-pin TSSOP package proves pin compatibility with another clock IC. Before substituting the VSC8115XYA-06-T or any other candidate, compare the complete pin descriptions, supply requirements, input thresholds, reference arrangements, output behavior, and timing limits. Also verify the exact ordering suffix and production status rather than substituting the VSC8115 base designation without reviewing its package code.
合规信息
The product is identified as lead-free. RoHS, REACH, halogen-free, and conflict-minerals status are not stated in the verified product information.