VSC8514XMK-DC - 4-Port Gigabit Ethernet PHY | Microchip
料号: VSC8514XMK-DC ✓ 量产中VSC8514XMK-DC 概述
A Gigabit Ethernet physical-layer controller is a semiconductor in the interface-IC hierarchy. It converts high-speed serial data generated by a MAC into electrical signaling suitable for twisted-pair copper cables and recovers receive information from those signals. The PHY also handles line coding, link negotiation, auto-negotiation, and cable diagnostics. By integrating four channels in one package, the VSC8514 helps reduce board area and component count in gateways, routers, switches, and carrier equipment.
The principal benefits are four-channel integration, QSGMII MAC connectivity, low-power operation, and link-status monitoring. Multi-channel integration simplifies routing and shared-clock implementation on systems that require several copper Ethernet ports. Low-power operation is valuable in energy-efficient broadband gateways and data-center systems where unused ports must avoid unnecessary load. Link-status monitoring supports port management, fault isolation, and network-control software.
The VSC8514 family combines copper Gigabit Ethernet physical layers with a high-speed QSGMII interface for connection to a MAC or carrier-grade SoC. ActiPHY power management can reduce power in unused or low-activity links, while VeriPHY cable diagnostics provide cable-condition information for remote troubleshooting. These functions make the controller suitable where maintainability, diagnostics, and port density matter as much as raw throughput.
Typical uses include enterprise access switches, broadband gateway equipment, wireless base-station backhaul, carrier Ethernet systems, and industrial network switches. A four-port PHY reduces the number of physical-layer devices required by a chassis with four copper uplinks. It is particularly useful where QSGMII provides a common high-speed bus between a central MAC and multiple PHY channels.
Designers should follow the manufacturer reference schematic and pin-description table for the 138-QFN land pattern, exposed-pad connection, clocking, supplies, and QSGMII routing. Keep the high-speed serial interface over controlled-impedance traces, provide the specified decoupling and crystal or clock circuitry, and route copper-pair signals according to the reference layout. Thermal performance also depends on the exposed-pad copper and surrounding airflow.
This page combines the VSC8514XMK-DC device identity, family-level engineering details, same-footprint replacement candidates, comparison parameters, and practical PCB guidance. Use the linked manufacturer datasheet for the definitive electrical limits, pin list, timing data, and package drawings before releasing a production layout.
直接替换替代料: VSC8514XMK-DC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: VSC8514XMK-DC (相同外形与封装尺寸) ——差异在于 Package, Synchronous Ethernet, Power Management, Cable Diagnostics, Operating Temperature Range.
VSC8514XMK-14
✅ 直接替换联系询价
查看数据手册 →VSC8514XMK-11
✅ 直接替换📋 参考替代料(不在目录中)
VSC8514XMK-03
✅ 直接替换联系询价
查看数据手册 →VSC8514XMK
✅ 直接替换联系询价
查看数据手册 →VSC8514XMK-DC 规格参数
| Product Type | Quad-port Gigabit Ethernet copper PHY controller |
| Ethernet Port Count | 4 ports |
| Supported Data Rates | 10/100/1000BASE-T |
| MAC Interface | QSGMII |
| 封装 | 138-QFN (12 mm x 12 mm) |
| 工作温度范围 | -40 °C to +110 °C |
| Synchronous Ethernet | Supported in the VSC8514 family; target-suffix support requires datasheet confirmation |
| Power Management | ActiPHY low-power operation |
| Cable Diagnostics | VeriPHY cable diagnostics |
| Link Monitoring | Link status monitoring |
| Energy Efficient Ethernet | Supported in the VSC8514 family; target-suffix support requires datasheet confirmation |
| Multi-Channel Integration | Supported |
| Copper Media | 10/100/1000BASE-T twisted-pair Ethernet |
| 安装类型 | Surface mount |
| 引脚数量 | 138 pins |
| Package Dimensions | 12 mm x 12 mm |
VSC8514XMK-DC 12 mm x 12 mm 引脚配置指南
VSC8514XMK-DC(12 mm x 12 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: VSC8514XMK-DC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
VSC8514XMK-DC 适用于 6 应用s: Enterprise Access Switches, Broadband CPE Gateways, Carrier Ethernet Backhaul, Wireless Base-Station Backhaul, Industrial Network Equipment, Data-Center Edge Networking.
Enterprise Access Switches
The VSC8514XMK-DC fits a four-port enterprise access switch because it integrates four 10/100/1000BASE-T copper channels behind a QSGMII interface. A single PHY device can connect multiple access ports to a switching MAC or network SoC while reducing PCB area and package count. Link-status monitoring helps software identify unavailable links, while VeriPHY diagnostics support remote cable troubleshooting. The principal design requirement is controlled-impedance QSGMII routing and compliance with the manufacturer reference layout. Verify the exact suffix features, clocking scheme, magnetic-component integration, and thermal limits against the VSC8514 datasheet before production release.
推荐
Broadband CPE Gateways
The VSC8514XMK-DC is appropriate for broadband customer-premises equipment requiring four Gigabit Ethernet service ports. Its multi-channel PHY integration allows a gateway SoC to reach four copper endpoints through QSGMII instead of requiring four separate PHY packages. Low-power operation and ActiPHY power management are useful in energy-efficient broadband gateways where link activity varies. VeriPHY cable diagnostics can help identify wiring faults during installation or remote support. Engineering teams should confirm the exact -DC feature configuration, configure the PHY through the host interface correctly, and follow the manufacturer power and layout guidance.
推荐
Carrier Ethernet Backhaul
The VSC8514XMK-DC supports carrier Ethernet equipment where multiple Gigabit copper services must terminate on a common MAC or carrier-grade processor. The four integrated PHY channels provide a scalable copper-facing front end, and QSGMII creates a high-speed interface between the PHY and switching fabric. The VSC8514 family's operating-temperature capability of -40 °C to +110 °C is suitable for demanding industrial and carrier environments, subject to exact suffix qualification. Link monitoring and cable diagnostics improve field maintenance. Confirm SyncE availability, synchronization architecture, reset requirements, and thermal performance before selecting this ordering code.
推荐
Wireless Base-Station Backhaul
The VSC8514XMK-DC can be used in wireless base-station backhaul equipment that combines radio processing with wired Ethernet services. Four copper Gigabit channels allow a common carrier processor to interface with multiple network segments through QSGMII, reducing the number of discrete PHY components. This integration is valuable where board space and power are constrained. The exact SyncE option is important because the VSC8514 family supports synchronization while some ordering variants explicitly omit it. Use the VSC8514 ordering table to confirm the -DC configuration, and validate timing, reference-clock routing, thermal rise, and EMC controls using the manufacturer application guidance.
推荐
Industrial Network Equipment
The VSC8514XMK-DC fits industrial Ethernet equipment requiring four 10/100/1000BASE-T ports in a compact surface-mount package. The listed -40 °C to +110 °C family temperature range supports harsh operating environments, while multi-channel integration simplifies chassis wiring. Link-status monitoring assists fault detection in PLC, factory, and building-control networks, and cable diagnostics help identify connector or cable degradation. The design must pay particular attention to the 138-QFN exposed-pad thermal design and to keeping QSGMII routing away from noisy switching nodes. Confirm the exact ordering code and all suffix-specific limits before approval.
推荐
Data-Center Edge Networking
The VSC8514XMK-DC is suitable for data-center edge switches and management appliances that need four copper Gigabit Ethernet ports alongside higher-speed uplinks. Integrating four PHY channels allows a QSGMII-equipped switching ASIC or MAC to connect server-facing or management ports economically. ActiPHY power management is beneficial when many edge ports operate intermittently, while link monitoring helps software identify failed links. Designers should account for the heat generated by four active channels, provide adequate copper beneath the exposed pad, and maintain the specified QSGMII trace geometry. Validate electromagnetic behavior, synchronization requirements, and the exact suffix feature set against the manufacturer documentation.
推荐
推荐产品汇总
工程参考数据: VSC8514XMK-DC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | VSC8514XMK-14 | VSC8514XMK-11 | VSC8514XMK-03 | VSC8514XMK |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 138-QFN (12 mm x 12 mm) | 138-QFN (12 mm x 12 mm) | 138-QFN (12 mm x 12 mm) | 138-QFN (12 mm x 12 mm) | 138-QFN (12 mm x 12 mm) |
| Ethernet Port Count | 4 ports | 4 ports | 4 ports | 4 ports | 4 ports |
| Copper Ethernet Support | 10/100/1000BASE-T | 10/100/1000BASE-T | 10/100/1000BASE-T | 10/100/1000BASE-T | 10/100/1000BASE-T |
| MAC Interface | QSGMII | QSGMII | QSGMII | QSGMII | QSGMII |
| Cable Diagnostics | VeriPHY cable diagnostics | VeriPHY cable diagnostics | VeriPHY cable diagnostics | VeriPHY cable diagnostics | VeriPHY cable diagnostics |
| Power Management | ActiPHY low-power operation | ActiPHY low-power operation | ActiPHY low-power operation | ActiPHY low-power operation | ActiPHY low-power operation |
| Link Status Monitoring | Supported | Supported | Supported | Supported | Supported |
关键差异点
- Four copper Gigabit Ethernet channels integrated in one controller (对比 Single-port interface families such as KSZ8041RNL-TR)
- Common high-speed QSGMII host connection (对比 KSZ8001LA2TR)
- Field diagnostics and power management in the four-port PHY (对比 KSZ8041FTL-TR)
- Industrial-family operating range (对比 VSC8514XMK-14)
设计说明
Follow the VSC8514 reference layout for the 138-QFN land pattern, exposed-pad connection, component placement, and QSGMII escape routing. Treat QSGMII as a controlled-impedance high-speed interface: use continuous reference planes, minimize vias, avoid stubs, and maintain the specified spacing from clocks, supplies, and switching nodes. Compare the finished stackup and routing against the manufacturer test-board recommendations before releasing copper.
The 12 mm by 12 mm 138-QFN package includes a substantial exposed thermal region, but four active Gigabit channels can still raise junction temperature in a densely populated enclosure. Use the manufacturer's exposed-pad land pattern and thermal-via arrangement, provide uninterrupted top and bottom copper, and avoid placing heat sources directly beneath the PHY. Validate the hottest operating corner with the actual airflow, magnetics, switching regulators, and enclosure rather than relying on nominal PCB copper alone.
Separate the reference clock, QSGMII lanes, copper-pair connections, and power-distribution paths according to the reference design. Keep clock routing short and symmetric, observe the recommended termination and coupling network, and maintain continuous return paths beneath high-speed traces. Account for connector and magnetics placement because those components can introduce discontinuities and coupled noise. If eye quality or EMC margins are poor, review layer transitions and via geometry before changing component values.
Decouple each required supply rail at the device using the capacitance and placement specified by the VSC8514 datasheet, and provide local bulk energy close to the package. Size the rail for the worst combination of four active ports, startup current, transient activity, and neighboring circuitry rather than a single-port typical condition. Verify sequencing, voltage tolerances, ripple, and power-supply rejection across all operating modes, including low-power ActiPHY transitions.
Do not choose a VSC8514 ordering suffix solely because it uses the same 138-QFN package. Check SyncE availability, industrial-temperature status, clock requirements, register defaults, customer-specific configuration, and qualification. The VSC8514XMK-14 is explicitly identified as a no-SyncE industrial-temperature variant, illustrating how suffix differences can matter. Complete the manufacturer ordering-table comparison and perform a hardware reset, link, thermal, and timing validation before substituting another suffix.
合规信息
Compliance declarations for the exact VSC8514XMK-DC ordering code require confirmation from the manufacturer product page or material-declaration documentation.