VSC8574XKS-04 - 4-Port Gigabit Ethernet PHY | Microchip
料号: VSC8574XKS-04 ✓ 量产中VSC8574XKS-04 概述
A Gigabit Ethernet PHY is the physical-layer component that converts between digital MAC-layer data and analog signals transmitted over copper cabling. Within the network hierarchy, the VSC8574 is an Ethernet transceiver, interface IC, and semiconductor. Its QSGMII interface supports aggregation of multiple lanes, while SGMII provides a serial gigabit interface between the PHY and a network MAC. This combination is suited to high-port-count switches, routers, telecom access equipment, industrial gateways, and server network interfaces.
The primary features of the VSC8574XKS-04 include four Gigabit Ethernet ports, SGMII and QSGMII MAC-facing interfaces, VeriTime IEEE 1588 support, and Ring Resiliency capability. Ring Resiliency provides mechanisms for maintaining network operation when links or ring paths experience faults. IEEE 1588 timing support is particularly valuable in carrier-grade and industrial systems where synchronized clocks are required across packet-processing equipment.
The VSC8574 family is implemented for high-performance communication systems and combines several physical-layer functions with serial MAC connectivity. The 256-pin PBGA package provides the necessary high-density connections for four channels, clocks, controls, and power delivery. Because the package has numerous power and high-speed signal pins, exact rail requirements, pin functions, clocking details, and electrical limits must be confirmed against the manufacturer datasheet and hardware design checklist before layout begins.
Typical applications include multi-port Ethernet switches with four copper PHY channels, telecommunications aggregation equipment, industrial Ethernet networking, data-center networking, access-network infrastructure, and synchronized industrial control systems. The four integrated ports can reduce the number of discrete PHY devices needed in a line card while preserving a centralized MAC-facing QSGMII connection.
PCB implementation should follow the manufacturer VSC8574 hardware design checklist. Keep local decoupling physically close to the appropriate power pins, minimize supply-path resistance, and use correctly positioned bulk and bypass capacitors. Differential and high-speed routing requires controlled impedance, short return paths, continuous reference planes, and careful separation between clocks, serial interfaces, and sensitive analog circuitry.
This page combines manufacturer feature information, package details, application guidance, practical design considerations, and same-footprint replacement analysis. It is intended to help engineers identify whether the VSC8574XKS-04 fits a four-port Gigabit Ethernet design and to evaluate compatible family variants before committing a new hardware platform.
直接替换替代料: VSC8574XKS-04 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: VSC8574XKS-04 (相同外形与封装尺寸) ——差异在于 Product Type.
VSC8574XKS-02
✅ 直接替换联系询价
查看数据手册 →VSC8574XKS-05
✅ 直接替换📋 参考替代料(不在目录中)
VSC8572XKS-04
✅ 直接替换📋 参考替代料(不在目录中)
VSC8552XKS-04
✅ 直接替换联系询价
查看数据手册 →VSC8504XKS-01
✅ 直接替换联系询价
查看数据手册 →VSC8574XKS-04 规格参数
| Product Type | 4-port Gigabit Ethernet PHY transceiver |
| Ethernet Port Count | 4 ports |
| Supported Ethernet Speed | Gigabit Ethernet |
| MAC Interface | SGMII and QSGMII |
| Time Synchronization | VeriTime IEEE 1588 |
| Network Resilience | Ring Resiliency |
| Package Type | 256-PBGA |
| Package Dimensions | 17 mm x 17 mm |
| 引脚数量 | 256 pins |
| 安装类型 | Surface mount |
| 分类 | Telecom IC / Ethernet interface IC |
| RoHS 状态 | RoHS3 compliant |
VSC8574XKS-04 17 mm x 17 mm 引脚配置指南
VSC8574XKS-04(17 mm x 17 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: VSC8574XKS-04.
请参阅 数据手册 以查看完整引脚配置。
典型应用
VSC8574XKS-04 适用于 6 应用s: Multi-Port Gigabit Ethernet Switches, Telecommunications Access Equipment, Industrial Ethernet Gateways, Data-Center Network Interfaces, Synchronized Industrial Control Systems, Resilient Ring Network Equipment.
Multi-Port Gigabit Ethernet Switches
The VSC8574XKS-04 is appropriate for switch line cards requiring four Gigabit Ethernet copper ports in one device. Its four integrated PHYs reduce the number of separate PHY packages, while QSGMII provides a high-speed aggregation path toward a switching fabric and SGMII supports individual serial MAC connections. The 256-pin PBGA exposes the interfaces and power connections required for a high-performance switching design. Before layout, engineers should confirm the exact clocking plan, port configuration, trace lengths, and power rails against the Microchip hardware design checklist. This arrangement is especially useful when equipment needs predictable four-port copper connectivity without using four unrelated PHY devices.
推荐
Telecommunications Access Equipment
Access and aggregation equipment can use the VSC8574XKS-04 to terminate four Gigabit Ethernet copper services while connecting to an upstream MAC through SGMII or QSGMII. VeriTime IEEE 1588 support adds value where packet timing and synchronization across the access network are important. The 256-pin PBGA package supports a compact, high-density implementation, but telecom designs require careful separation of analog, digital, clock, and high-speed interface routing. Engineers should use the manufacturer's transition guide and hardware checklist to manage clock-generation behavior, decoupling, impedance-controlled routes, and thermal performance before releasing production hardware.
推荐
Industrial Ethernet Gateways
The VSC8574XKS-04 suits industrial gateways that combine four Gigabit Ethernet links with a high-speed uplink to a processor or communications controller. SGMII can support a dedicated serial link, while QSGMII can aggregate the four lanes when the MAC and board architecture support that topology. Ring Resiliency may improve fault tolerance in managed industrial networks where uninterrupted service is valuable. The design must be evaluated for the required environmental range, isolation strategy, grounding, and protection requirements. Decoupling capacitors should be placed directly at the relevant power pins, and differential pairs must be routed with continuous reference planes and controlled impedance.
推荐
Data-Center Network Interfaces
A data-center access or aggregation card can use the VSC8574XKS-04 to provide four 1GbE physical-layer ports with a common high-speed MAC-facing interface. This configuration supports consolidated copper connectivity in chassis and rack-edge equipment while preserving four independent network links. The PBGA package's 256 contacts permit the required power, ground, control, and high-speed connections, although signal integrity depends on careful stack-up selection and impedance control. Place bulk and local decoupling as directed by Microchip, avoid discontinuities in reference planes beneath high-speed pairs, and verify clock jitter, skew, lane mapping, and SerDes signal integrity during hardware bring-up.
推荐
Synchronized Industrial Control Systems
The VSC8574XKS-04 is suitable for synchronized industrial control infrastructure that combines ordinary Ethernet links with precise timing distribution. Its VeriTime IEEE 1588 capability supports systems where multiple network nodes require accurate time relationships, while Ring Resiliency adds operational protection for ring-based network topologies. Four integrated Gigabit PHYs can simplify a controller or line-card architecture. Implementation still requires validating the supported clocking modes, timestamp interface behavior, synchronization accuracy, and environmental limits in the manufacturer documentation. Exact revision-specific clock-generation errata must also be reviewed before selecting a -02 or -05 ordering code.
推荐
Resilient Ring Network Equipment
The VSC8574XKS-04 is applicable to network equipment that uses Ring Resiliency to maintain service during link or ring-path faults. Four Gigabit Ethernet physical layers can be integrated into a compact access or aggregation card, with SGMII and QSGMII providing configurable MAC connectivity. Ring Resiliency complements the PHY function but does not remove the need for network-level control, protocol support, and fault-recovery validation. Board designers should verify the required ring configuration, clock relationships, recovery behavior, and firmware support. Decoupling and filtering should follow the Microchip VSC8574 hardware design checklist to preserve signal and power integrity across all four channels.
推荐
推荐产品汇总
工程参考数据: VSC8574XKS-04 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | VSC8574XKS-02 | VSC8574XKS-05 | VSC8572XKS-04 | VSC8552XKS-04 | VSC8504XKS-01 |
|---|---|---|---|---|---|---|
| Package | 256-PBGA (17x17 mm) | 256-PBGA (17x17 mm) | 256-PBGA (17x17 mm) | 256-PBGA (17x17 mm) | 256-PBGA (17x17 mm) | 256-PBGA (17x17 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
关键差异点
- Four Gigabit Ethernet physical layers in one package (对比 VSC8504XKS-01)
- Avoids the documented timestamp-SPI clock errata affecting -02 (对比 VSC8574XKS-02)
- Supports high-speed MAC aggregation through QSGMII (对比 VSC8552XKS-04)
- Adds precision timing and ring-fault resilience (对比 VSC8504XKS-01)
设计说明
Follow the Microchip VSC8574 Hardware Design Checklist for power delivery. Position local decoupling at the correct supply pins, minimize resistive drop in each rail path, and add bulk capacitance where required by the checklist. The manufacturer specifically recommends using a ferrite bead rather than a series-inductor filter where practical for high-density or high-power implementations. Review every supply and ground connection against the 256-ball package drawing before fabrication.
Treat SGMII, QSGMII, clock, and Ethernet differential routes as controlled-impedance interfaces. Maintain continuous reference planes, avoid plane splits beneath the pairs, minimize stubs and unnecessary vias, and observe length and skew constraints from the manufacturer interface guidelines. Because the device combines four high-speed channels in a 17 mm by 17 mm PBGA, the PCB stack-up and escape-routing strategy must be selected before component placement.
Do not substitute ordering-code variants solely because they use the same package. Microchip's transition design guide identifies clock-generation errata on the serial timestamp SPI for VSC8574XKS-02 and VSC8574XKS-05. Confirm the affected clock behavior, firmware expectations, schematic differences, and qualification status before approving any replacement. Also verify that the selected PHY configuration and MAC interface match the PCB's actual routing.
合规信息
The exact VSC8574XKS-04 listing is identified as RoHS3 compliant. No definitive REACH, lead-free, halogen-free, or conflict-minerals statement is available for this ordering code. Automotive qualification is not indicated for this communications interface IC.