WM8804GEDS/RV - 1:1 S/PDIF Audio Transceiver | Cirrus Logic
料号: WM8804GEDS/RV ✗ 停产WM8804GEDS/RV 概述
An S/PDIF transceiver is an interface IC that converts serial digital-audio data into electrical signals compatible with the consumer-mode S/PDIF standard, while also recovering data from an incoming S/PDIF stream. Within the broader semiconductor hierarchy, the WM8804 is an audio interface transceiver, a digital-audio interface IC, and a member of the broader interface semiconductor and audio processing categories.
The principal features include support for one transmit channel and one receive channel, a crystal-derived or externally supplied main clock, low-jitter clock recovery, and internal generation of commonly used audio clocks. The combination of a digital interface and integrated PLL allows a compact design to interface an audio codec, DAC, or digital-audio processing device with an external S/PDIF port. Its 20-lead SSOP package also supports conventional surface-mount assembly.
The WM8804 uses differential S/PDIF signaling for digital audio and relies on a stable reference clock for deterministic transmitter and receiver operation. Designers must account for clock quality, supported audio data formats, and the interface voltage levels when connecting the device. The exact supply voltage, supported sample-rate range, and principal electrical limits must be confirmed in the manufacturer datasheet before final circuit release.
Typical uses include consumer digital-audio equipment, source and sink interfaces, clock-cleaning and distribution arrangements, and embedded audio systems requiring a bridge between S/PDIF and another digital-audio controller. The integrated transceiver is especially useful where a design needs both S/PDIF receive and transmit capability without using two separate interface devices.
PCB implementation should preserve the pin assignments defined by the manufacturer datasheet and provide a continuous return path beneath the interface circuitry. Decoupling, grounding, clock routing, and output-impedance matching remain central to achieving reliable S/PDIF operation and low jitter.
This product overview combines the device identity, package information, lifecycle status, functional architecture, practical application guidance, and verified sourcing records. It also distinguishes the WM8804 from components that only receive S/PDIF signals or that use a different package and pin configuration, helping engineers evaluate replacement risk before changing an existing PCB.
直接替换替代料: WM8804GEDS/RV ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: WM8804GEDS/RV (相同外形与封装尺寸) ——差异在于 Product Type.
WM8804GEDS/V
✅ 直接替换联系询价
查看数据手册 →WM8804GEDS/R
✅ 直接替换📋 参考替代料(不在目录中)
WM8804GEDS/RV 最大额定值与电气特性
| Product Type | Consumer-mode S/PDIF digital audio transceiver |
| Receive Channel Count | 1 channel |
| Transmit Channel Count | 1 channel |
| Interface Ratio | 1:1 transmit-to-receive |
| Clock Architecture | Crystal-derived or externally provided main clock |
| PLL Capability | Integrated PLL with clock recovery and generation |
| Generated Clocks | Commonly used audio clocks |
| 封装 | 20-lead SSOP |
| Lead-Free Construction | Pb-free package |
| Mounting Method | Surface mount |
| 生命周期状态 | Discontinued |
WM8804GEDS/RV 20-lead ssop 引脚配置指南
WM8804GEDS/RV(20-lead ssop 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: WM8804GEDS/RV.
请参阅 数据手册 以查看完整引脚配置。
典型应用
WM8804GEDS/RV 适用于 6 应用s: Digital Audio Source and Sink Interface, Consumer Digital Audio Equipment, Digital Audio Clock Recovery, Audio Codec Host Interface, Digital Audio Distribution, Audio Processing Bridge.
Digital Audio Source and Sink Interface
The WM8804GEDS/RV fits equipment that must both transmit and receive one channel of consumer-mode S/PDIF audio. Its one-to-one transceiver arrangement avoids a separate receive-only and transmit-only architecture when both directions are required. The integrated PLL supports clock recovery and generation, helping the surrounding codec, DAC, or digital-audio controller operate from a coherent timing reference. Engineers should verify the required sample rates, data format, supply voltage, and exact pin assignments in the manufacturer datasheet before release.
Consumer Digital Audio Equipment
The WM8804GEDS/RV can serve as the digital-audio interface in consumer equipment that exchanges S/PDIF data with an external source or sink. Its transmit and receive channels provide a compact bridge between the S/PDIF connector and an internal audio-processing path, while the PLL manages clock relationships. This makes the device applicable to legacy and specialist audio designs using the Wolfson digital-audio ecosystem. Signal-level, impedance, and supported-format checks remain mandatory during schematic review.
Digital Audio Clock Recovery
The WM8804GEDS/RV is applicable where an incoming S/PDIF clock must be recovered before it is distributed to other digital-audio blocks. The manufacturer describes low-jitter recovery from S/PDIF clocks using either a crystal-derived or externally supplied main clock. This arrangement can support an audio codec or digital signal-processing chain that expects stable derived clocks. Clock-jitter limits, supported audio rates, and the required reference-clock topology must be confirmed directly from the device documentation.
Audio Codec Host Interface
A design using a digital-audio codec can place the WM8804GEDS/RV on the external S/PDIF side while the codec handles local audio processing and conversion. The transceiver's PLL and clock-generation capability reduces the amount of separate clock infrastructure needed around the interface. Such integration is useful in compact source, monitor, and recording products. The interface-level voltage, clock ratios, format support, and startup behavior must be reconciled between the codec and transceiver documentation.
Digital Audio Distribution
The WM8804GEDS/RV fits systems that need to recover and distribute common audio clocks derived from an S/PDIF source. Its internal PLL can generate clocks commonly used by digital-audio devices, supporting a more coordinated clock architecture. In a multi-block equipment design, careful isolation and routing are needed to prevent clock distortion and crosstalk. The designer should use the manufacturer clock tree, supported frequencies, and application guidance to construct a valid distribution network.
Audio Processing Bridge
The WM8804GEDS/RV can bridge an external S/PDIF stream and an internal digital-audio processing path while maintaining separate transmit and receive channels. This is useful when an audio engine, formatter, or test system must exchange data with equipment using the consumer digital interface. Its integration simplifies the external connection, but the project still needs a verified audio format, sampling-rate, clocking, and signal-conditioning plan. The discontinued lifecycle status should be considered early in the design schedule.
工程参考数据: WM8804GEDS/RV ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Cirrus Logic Inc. |
| Package | 20-lead Pb-free SSOP |
| Product Type | Consumer-mode S/PDIF transceiver |
| Receive Channels | 1 channel |
| Transmit Channels | 1 channel |
| Channel Ratio | 1:1 |
| Clock Source | Crystal-derived or externally provided main clock |
| Clock Recovery and Generation | Integrated PLL |
| Lifecycle Status | Discontinued |
关键差异点
- Integrated bidirectional digital-audio interface (对比 CS8416)
- On-chip clock recovery and generation (对比 WM8804GEDS/R)
- Single-device S/PDIF interface integration (对比 Receive-only S/PDIF interface)
设计说明
Follow the manufacturer layout recommendations for the 20-lead SSOP rather than improvising S/PDIF trace geometry. Place support components close to their associated pins, maintain a continuous ground reference beneath the device, and keep the clock and digital-audio nets short. Confirm differential trace spacing, impedance targets, and any external network values against the datasheet before fabrication.
Treat the S/PDIF connections and clock inputs as sensitive digital interfaces. Use a continuous return path, avoid splitting ground planes beneath the transceiver unless the reference design does so, and keep switching-node copper and high-current paths away from the receiver and clock nodes. Verify signal amplitude and impedance at the connector because cable, receiver, and transmitter characteristics jointly determine reliable operation.
Do not substitute an S/PDIF receiver-only IC as a direct board replacement. The WM8804GEDS/RV includes both transmit and receive channels plus a PLL, so an alternative must match the package, pin assignments, control interface, clock topology, supply, and supported audio formats. Check the obsolete-product risk early because lifecycle changes can make a technically compatible redesign harder to procure.
合规信息
The product description identifies the WM8804GEDS/RV as being supplied in a Pb-free 20-lead SSOP package. No separate RoHS, REACH, halogen-free, conflict-minerals, or automotive qualification statement was established.