XA7A35T-2CPG236I - 33,280-Cell Automotive Artix-7 FPGA | AMD
料号: XA7A35T-2CPG236I ✓ 量产中XA7A35T-2CPG236I 概述
An FPGA is a reconfigurable semiconductor containing programmable logic blocks, block RAM, digital signal processing resources, and programmable I/O. Within the hierarchy of programmable logic devices, an FPGA sits between simple programmable logic and more complex programmable system-on-chip devices. Its parallel architecture executes multiple control or data-processing operations simultaneously, making it useful for automotive electronics, industrial automation, communications, instrumentation, and embedded systems.
The XA7A35T family combines 2,600 logic array blocks with 90 DSP slices and 1,760 Kbits of block RAM. These resources allow designers to implement parallel algorithms, control logic, signal conditioning, communication interfaces, and data acquisition without relying on a fixed internal processor structure. The 106 available I/O support integration with external memory, sensors, transceivers, and automotive communication networks.
The device is manufactured on a 28 nm process and carries the -2 performance designation. Its architecture separates general-purpose logic from dedicated DSP and memory resources, allowing design tools to map operations according to timing, resource, and power constraints. Configuration data controls the interconnect and logic implemented after programming, while the surrounding system must provide the correct power rails, configuration interface, clocking, and decoupling.
Typical uses include vehicle control modules, sensor-fusion front ends, industrial machine vision, secure communications, test equipment, and embedded data acquisition. The automotive XA designation is particularly relevant when procurement specifications require an automotive qualification path rather than a standard industrial Artix-7 device.
A key design requirement is preserving the CPG236 ball-grid footprint and power architecture. Review the AMD package pinout files and UG475 before assigning signals, and validate every board-level power, decoupling, and configuration detail against the manufacturer documentation. Do not substitute an industrial XC device without confirming qualification, temperature, speed-grade, and lifecycle requirements.
直接替换替代料: XA7A35T-2CPG236I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
XC7A35T-2CPG236I
✅ 直接替换联系询价
查看数据手册 →XA7A35T-1CPG236C
✅ 直接替换📋 参考替代料(不在目录中)
XA7A35T-1CPG236I
✅ 直接替换📋 参考替代料(不在目录中)
XC7A35T-1CPG236I
✅ 直接替换📋 参考替代料(不在目录中)
XA7A35T-1CPG236Q
✅ 直接替换📋 参考替代料(不在目录中)
XA7A35T-2CPG236I 最大额定值与电气特性
| FPGA Family | Artix-7 XA |
| Logic Cells | 33,280 cells |
| Logic Array Blocks | 2,600 LABs |
| User I/O | 106 I/O |
| Block RAM | 1,760 Kbits (1.8 Mbits total) |
| RAM Bits | 1,843,200 bits |
| DSP Slices | 90 slices |
| Process Technology | 28 nm |
| Speed Grade | -2 |
| Nominal Core Voltage | 1 V |
| 封装 | 236-CSBGA, also identified as 238-LFBGA/CSPBGA |
| Package Type | CSPBGA |
| Terminals | 236 terminals |
| Automotive Qualification | AEC-Q100 |
| Device Family | XA automotive Artix-7 |
XA7A35T-2CPG236I cspbga 引脚配置指南
XA7A35T-2CPG236I(cspbga 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XA7A35T-2CPG236I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XA7A35T-2CPG236I 适用于 6 应用s: Automotive Control Modules, Industrial Sensor Fusion, Machine Vision Processing, Secure Communications Equipment, Data Acquisition and Instrumentation, Aerospace and Defense Control.
Automotive Control Modules
The XA7A35T-2CPG236I suits automotive control modules that need parallel logic, deterministic interface handling, and programmable signal processing. Its 33,280 logic cells and 90 DSP slices can support state-machine coordination, actuator control, sensor conditioning, and communication protocol logic without relying on a fixed microcontroller architecture. The 106 I/O provide connections to sensors, transceivers, and power devices, while the CPG236 package supports dense surface-mount assemblies. The -2 speed designation is useful when timing margins are tighter than the -1 grade provides. Because this is an XA automotive device associated with AEC-Q100, engineers should confirm the exact temperature suffix, qualification evidence, and fault-coverage requirements before releasing a production design.
推荐
Industrial Sensor Fusion
The AMD XA7A35T-2CPG236I can consolidate sensor-fusion preprocessing in a compact programmable-logic device. Its 90 DSP slices are suited to parallel filtering, correlation, and fixed-point signal-processing operations, while 1,843,200 RAM bits provide local buffering for time-series and multi-channel data. The 106 I/O can connect digital sensors, converters, and communication transceivers without forcing all processing into a sequential microcontroller. Using the -2 grade can improve timing headroom for simultaneous data paths, although final clock rates must satisfy the Artix-7 timing requirements. The same physical design can also be evaluated with XC7A35T-2CPG236I for industrial-only programs where automotive qualification is not required.
推荐
Machine Vision Processing
The XA7A35T-2CPG236I is well suited to machine-vision front ends that perform pixel, line, and feature processing in parallel. Its 33,280 logic cells can implement pipeline control and interface adapters, while the 90 DSP slices accelerate multiply-accumulate operations used by filters and correlation stages. Up to 106 I/O support cameras, image sensors, memory devices, and network or debug interfaces. The -2 grade offers a higher performance designation than -1 alternatives, making timing closure more practical for demanding pipelines. Engineers should evaluate memory bandwidth, external transceiver performance, and power dissipation in the final vision module. For industrial systems without automotive qualification requirements, XC7A35T-2CPG236I can serve as the comparison baseline.
推荐
Secure Communications Equipment
The XA7A35T-2CPG236I can implement parallel communication engines, protocol converters, packet checks, and encryption-related datapaths when programmable timing and I/O density are priorities. Its 1,843,200 RAM bits support buffers and line-rate packet storage, and the 90 DSP slices can accelerate filtering and modulation tasks. The 106 I/O allow direct connection to transceivers and memory while avoiding excessive multiplexing. The -2 speed grade helps preserve margin in wide pipelines, but designers must validate clocking, I/O standards, and timing through AMD’s Artix-7 design flow. For industrial communications equipment, XC7A35T-2CPG236I provides the same principal architecture and package; XA7A35T-2CPG236I is preferred when the automotive qualification path is part of the procurement specification.
推荐
Data Acquisition and Instrumentation
The XA7A35T-2CPG236I supports parallel data-acquisition systems that combine multiple converter channels with real-time processing. Its 106 I/O can accommodate digital converter interfaces, triggering, status signals, and communication links, while 90 DSP slices execute filtering, interpolation, or demodulation stages. The 1,843,200 RAM bits allow deeper local capture than a small microcontroller architecture, and the -2 grade provides additional timing margin for high-throughput paths. Engineers should use the AMD package pinout files and UG475 to assign the 236-CSPBGA balls and should budget decoupling and power sequencing for every voltage rail. An industrial instrument can be assessed against XC7A35T-2CPG236I using identical schematic and layout assumptions.
推荐
Aerospace and Defense Control
The XA7A35T-2CPG236I can serve as a programmable control and signal-processing element in aerospace, drone, and defense-related equipment where compactness and parallel logic are valuable. Its 33,280 logic cells support control sequencing, redundant interface handling, and custom datapaths, while the 90 DSP slices accelerate arithmetic operations. The 236-CSPBGA package minimizes board area, and the -2 grade provides a higher speed designation for timing-critical pipelines. However, aerospace and defense suitability cannot be inferred from the automotive AEC-Q100 marking alone. Programs must evaluate radiation, temperature, reliability, long-term availability, export-control, and qualification requirements using the exact ordering information and AMD documentation. XC7A35T-2CPG236I is a useful electrical benchmark, not a default production replacement.
推荐
推荐产品汇总
工程参考数据: XA7A35T-2CPG236I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC7A35T-2CPG236I | XA7A35T-2CPG236C | XA7A35T-1CPG236I | XC7A35T-1CPG236I | XA7A35T-1CPG236Q |
|---|---|---|---|---|---|---|
| Package | 236-CSPBGA, 236 terminals | 236-CSPBGA | 236-CSPBGA | 236-CSPBGA | 236-CSPBGA | 236-CSPBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Artix-7 XA | Artix-7 XC | Artix-7 XA | Artix-7 XA | Artix-7 XC | Artix-7 XA |
| Logic Cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells |
| Speed Grade | -2 | -2 | -2 | -1 | -1 | -1 |
| Automotive Qualification | AEC-Q100 XA automotive device | Industrial XC qualification path | AEC-Q100 XA automotive device | AEC-Q100 XA automotive device | Industrial XC qualification path | AEC-Q100 XA automotive device |
| User I/O | 106 I/O | 106 I/O | 106 I/O | 106 I/O | 106 I/O | 106 I/O |
| RAM Bits | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits | 1,843,200 bits |
| DSP Slices | 90 slices | 90 slices | 90 slices | 90 slices | 90 slices | 90 slices |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
关键差异点
- Maintains the -2 performance grade in the automotive XA product line (对比 XA7A35T-1CPG236I)
- Preserves the 236-CSPBGA footprint and 106-I/O interface (对比 XC7A35T-2CPG236I)
- Uses the automotive XA qualification path (对比 XC7A35T-2CPG236I)
设计说明
Use AMD’s CPG236 package files and UG475 as the authority for every ball assignment. The 236-CSPBGA footprint has substantially finer routing geometry than a leaded package, so maintain the manufacturer’s pad, solder-mask, and paste-land patterns without substituting a visually similar BGA footprint. Cross-check the pinout against the exact XA7A35T-2CPG236I ordering code before releasing the PCB and compare the selected component’s ball map mechanically.
Treat the 1 V core rail and all I/O supply requirements as separate implementation problems. Place the required bypass capacitors at their specified package pins, keep the high-current return path compact, and provide clean power planes where sensitive configuration or clock inputs are located. The -2 speed grade may increase design activity relative to -1 alternatives, so complete post-route power estimation and verify rail sequencing against the manufacturer’s Artix-7 guidance.
Do not treat XC7A35T-2CPG236I as an automatically acceptable automotive replacement for XA7A35T-2CPG236I. The package and principal resource counts align, but the XA and XC families serve different qualification paths. Likewise, changing from -2 to -1 can alter timing closure even when the ball-out remains unchanged. Review automotive, temperature, lifecycle, and timing requirements and document the approval before changing the bill of materials.
Assign clocks and high-speed interfaces directly to suitable package pins and keep configuration, clock, and sensitive I/O nets away from noisy switching outputs wherever the pinout permits. Provide controlled clock sources, observe configuration setup-and-hold requirements, and validate interface timing with the final board. The 106-I/O resource count is shared by design resources, so preserving useful pin positions for high-speed functions is often more valuable than maximizing generic user I/O.
合规信息
The XA7A35T-2CPG236I is identified as an automotive Artix-7 device with AEC-Q100 qualification. No additional compliance declaration should be inferred without the applicable manufacturer document.