XC2C128-7CP132I - 128-Macrocell 1.8V Zero-Power ISP CPLD | AMD Xilinx
料号: XC2C128-7CP132I ✓ 量产中XC2C128-7CP132I 概述
A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines multiple programmable logic blocks, programmable interconnect, and I/O structures into one reconfigurable digital-logic device. The XC2C128 belongs to the CoolRunner-II family and provides a fixed architecture with macrocell-based logic resources. Compared with a discrete gate-array design, a CPLD allows logic changes through configuration programming without changing the printed circuit board.
The XC2C128-7CP132I is identified by the -7 speed grade, industrial temperature grade, and CP132 package designation. Its zero-power ISP characteristic means that unused configurable logic can be placed in a low-power state, helping reduce system power consumption in designs with variable activity. The device supports 1.7 V to 1.9 V internal supply operation, making it suitable for modern low-voltage embedded control systems when the surrounding interface and configuration circuitry is compatible.
The 128-macrocell resource supports up to approximately 3,000 gates of logic and eight logic array blocks. With 100 I/O pins, the CPLD can bridge multiple digital interfaces, implement protocol state machines, perform bus arbitration, or combine glue logic around processors, sensors, and memory controllers. Its 132-ball package is intended for compact surface-mount designs where a fine-pitch BGA footprint and moderate logic density are required.
Typical applications include industrial control and factory automation, instrumentation, embedded motor and power-control logic, communication-interface support, test equipment, and compact consumer or portable systems. The device is particularly useful when a design needs deterministic reconfigurable logic close to a processor or analog subsystem. Compared with a large FPGA, the fixed CoolRunner-II architecture can provide a simpler implementation path for moderate logic designs and lower-capacity glue-logic applications.
When designing around the XC2C128-7CP132I, verify the exact ball assignments, configuration interface, I/O standards, and supported I/O voltage combinations against the AMD XC2C128 CoolRunner-II CPLD Specification DS093. Place the device on a multilayer PCB with short, controlled-length configuration and signal routes, provide the required decoupling, and confirm thermal performance under the intended operating temperature. This page combines the identified device characteristics with sourcing context, package guidance, and practical design considerations for engineers evaluating the XC2C128-7CP132I.
直接替换替代料: XC2C128-7CP132I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC2C128-7CP132I (相同外形与封装尺寸) ——差异在于 Device Type.
XC2C128-7CP132C
✅ 直接替换联系询价
查看数据手册 →XC2C128-7CPG132I
✅ 直接替换📋 参考替代料(不在目录中)
XC2C128-7CPG132C
✅ 直接替换📋 参考替代料(不在目录中)
XC2C128-7CP132I 最大额定值与电气特性
| Device Type | Complex Programmable Logic Device (CPLD) |
| Family | CoolRunner-II |
| Macrocell Count | 128 macrocells |
| Equivalent Logic Gates | Approximately 3000 gates |
| Logic Array Blocks | 8 logic array blocks |
| Propagation Delay Class | 7 ns |
| Internal Supply Voltage | 1.8 V |
| Internal Supply Operating Range | 1.7 V to 1.9 V |
| I/O Pin Count | 100 I/O pins |
| 封装 | 132-ball TFBGA/CSPBGA |
| Package Terminal Type | Ball |
| Temperature Grade | Industrial |
| Programming | In-system programmable (ISP) |
| Power Feature | Zero-power operation |
| 安装类型 | Surface mount |
| 生命周期状态 | Active |
XC2C128-7CP132I ball 引脚配置指南
XC2C128-7CP132I(ball 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC2C128-7CP132I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC2C128-7CP132I 适用于 6 应用s: Industrial PLC Control Logic, Factory Automation Interface Consolidation, Instrumentation Signal Conditioning, Motor and Power Control Sequencing, Embedded System Glue Logic, Communication Protocol Assistance.
Industrial PLC Control Logic
The XC2C128-7CP132I is suitable for consolidating deterministic control logic around an industrial controller. Its 128 macrocells and approximately 3,000 equivalent gates can implement sequencing, interlocks, alarm logic, and machine-state machines, while 100 I/O pins provide substantial connectivity for sensors and actuators. The industrial temperature grade is important for equipment exposed to variable factory conditions. Use the device as a reconfigurable logic layer between a processor and field I/O, preserving deterministic behavior and reducing discrete gate count. Configuration storage and power sequencing must follow the AMD DS093 implementation requirements.
推荐
Factory Automation Interface Consolidation
Use the XC2C128-7CP132I to combine multiple discrete interface functions such as interlocks, pulse conditioning, sequencing, and status decoding. The 100 I/O pins can distribute digital signals across a control backplane, and the 8 logic array blocks provide enough configurable resources for moderate protocol state machines. Its zero-power ISP characteristic is valuable in equipment where unused logic can be held in a low-power state. Engineers should confirm that the selected I/O standards, voltage levels, and timing margins satisfy the factory network before schematic sign-off.
推荐
Instrumentation Signal Conditioning
The XC2C128-7CP132I can implement digital conditioning and control around analog measurement front ends. Configurable logic can coordinate sample sequencing, trigger handling, range selection, calibration state, and communication framing without occupying a larger FPGA. With 100 I/O pins and approximately 3,000 gates, the CPLD is practical for instrument control planes requiring many digital connections but modest computation. The 7 ns propagation-delay class helps preserve deterministic timing in short control paths. Confirm I/O voltage compatibility, configuration timing, and ground-current behavior in the final instrument architecture.
推荐
Motor and Power Control Sequencing
The XC2C128-7CP132I is useful for deterministic sequencing and protection coordination in motor-control and power-conversion equipment. Its programmable macrocell logic can manage command decoding, fault latching, timing windows, and interlock sequencing across 100 I/O pins. The compact 132-ball package supports integration close to controller and gate-drive circuitry, while the industrial grade supports demanding factory and equipment environments. Because the CPLD does not replace power semiconductors, validate isolation, gate-drive timing, and fault-response requirements independently. Use the AMD timing and power documentation to establish the safe operating limits.
推荐
Embedded System Glue Logic
The XC2C128-7CP132I fits between a processor and peripheral devices when several programmable interfaces, address decoding, or protocol state machines must be consolidated. Its 128 macrocells can implement fixed glue logic while retaining the ability to update the configuration for product revisions. The 100 I/O pins allow the design to bridge multiple buses and discrete control lines, and the 1.7 V to 1.9 V internal supply range fits compatible low-voltage systems. Review configuration pin states, startup behavior, and I/O standards carefully to prevent contention during reset and power sequencing.
推荐
Communication Protocol Assistance
The XC2C128-7CP132I can offload protocol framing, byte alignment, command filtering, and flow-control state machines in communication equipment. Its 100 I/O pins support parallel interfaces, while the approximately 3,000 gates provide enough logic for moderate-rate control and data-path assistance. The configurable architecture allows protocol updates without a PCB respin, which is useful for industrial gateways and test instruments. The 7 ns class supports deterministic short control paths but should not be interpreted as a substitute for a dedicated high-speed transceiver. Validate signal levels, clocking, and electrical timing against the selected physical interface.
推荐
推荐产品汇总
工程参考数据: XC2C128-7CP132I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC2C128-7CP132C | XC2C128-7CPG132I | XC2C128-7CPG132C |
|---|---|---|---|---|
| Package | 132-ball TFBGA/CSPBGA | 132-ball TFBGA/CSPBGA | 132-ball TFBGA/CSPBGA | 132-ball TFBGA/CSPBGA |
| Brand | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx |
| Device Type | CPLD | CPLD | CPLD | CPLD |
| Temperature Grade | Industrial | Commercial | Industrial | Commercial |
关键差异点
- Industrial temperature grade (对比 XC2C128-7CP132C)
- Same CP132 package platform (对比 XC2C128-7CPG132I)
- Dedicated 128-macrocell resource (对比 XC2C128-7CPG132C)
设计说明
Use a multilayer PCB with a continuous ground reference and route the 132-ball package on a layout compatible with its fine-pitch ball geometry. Keep the device footprint, ball numbering, and solder-mask definitions consistent with the AMD package drawing. Place input and output decoupling close to the relevant power and ground balls, and avoid routing sensitive signals through regions with noisy power-conversion stages.
Design the 1.8 V internal supply path around the device's documented operating range and startup requirements. Verify supply sequencing, current margin, decoupling, and configuration behavior during power transitions. Do not treat the internal core voltage as permission to omit external I/O voltage planning; the supported I/O standards and voltage combinations must be checked in AMD DS093.
Assign configuration pins and programming or in-system-programming signals first, because incorrect board-level connectivity can prevent configuration even when the logic design is otherwise valid. Keep configuration traces away from high-current switching nodes, preserve adequate return paths, and follow the AMD recommended ball layout for power, ground, configuration, and unused pins.
Do not select XC2C128-7CP132C as an automatic replacement for XC2C128-7CP132I when environmental requirements differ; the documented distinction is commercial versus industrial temperature grade. Likewise, verify the exact suffix of XC2C128-7CPG132I and XC2C128-7CPG132C against the required package, configuration interface, timing, and qualification conditions before releasing a substitution.
合规信息
The provided device information identifies the product as an industrial-grade CoolRunner-II CPLD but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.