XC2C32A-6CPG56C - 32-Macrocell 1.8V CPLD | AMD Xilinx
料号: XC2C32A-6CPG56C ✗ 停产XC2C32A-6CPG56C 概述
A CPLD, or complex programmable logic device, is a programmable semiconductor positioned between basic programmable logic arrays and FPGAs. Its interconnected macrocells combine combinational and registered logic functions, while embedded configuration memory determines the device behavior after power-up. Within the semiconductor hierarchy, the XC2C32A belongs to the CPLD family, the programmable-logic category, and ultimately the broader integrated-circuit and semiconductor markets.
Principal features include 32 macrocells, approximately 750 equivalent logic gates, 33 user I/O, and a fast 6 ns device designation. The CoolRunner-II architecture supports 1.8 V operation and LVCMOS interfaces at 3.3 V, 2.5 V, and 1.8 V when electrical conditions permit. Its low quiescent current, reported as low as 12 µA, is valuable in portable and power-constrained equipment. The two-bank I/O organization also provides flexibility for interface partitioning and level-compatible system connections.
The CSBGA package measures 6 × 6 mm and uses a 0.50 mm pitch, making it substantially more compact than leaded or larger plastic packages. This fine-pitch land pattern requires careful PCB layout, exact ball-to-pad geometry, and assembly-process control. Although the package offers high connection density, thermal behavior and solder-joint reliability must be evaluated against local power dissipation and the board's copper and thermal via structure.
Typical applications include compact interface controllers, display and peripheral glue logic, industrial control sequencers, low-power embedded systems, and portable equipment. The combination of 32 macrocells and 33 I/O is well suited to consolidating control logic around a processor or microcontroller while avoiding the resource overhead of a larger FPGA. The device can also implement bus arbitration, state machines, protocol conversion, and asynchronous interface bridging.
When designing around the XC2C32A-6CPG56C, confirm the exact ball assignments, voltage requirements, and I/O-standard constraints in AMD DS310 before fabrication. Keep sensitive traces short, provide the required configuration and control paths, and validate the PCB assembly process because the 0.50 mm CSBGA geometry offers limited tolerance for registration and solder defects.
This product record combines package, logic-capacity, interface, lifecycle, and replacement information with practical guidance for schematic capture, high-density PCB layout, and CPLD implementation. It is intended to help engineers determine whether the 56-pin CoolRunner-II device fits a design before beginning board layout or production planning.
直接替换替代料: XC2C32A-6CPG56C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC2C32A-6CPG56C (相同外形与封装尺寸) ——差异在于 Quiescent Current, User I/O Count, Device Type, Internal Frequency, Minimum Pin-to-Pin Logic Delay.
XC2C32A-6CPG56I
✅ 直接替换联系询价
查看数据手册 →XC2C32A-4CPG56C
✅ 直接替换联系询价
查看数据手册 →XC2C32-6CPG56C
✅ 直接替换📋 参考替代料(不在目录中)
XC2C32A-6CP56C
✅ 直接替换联系询价
查看数据手册 →XC2C32A-6CPG56C 最大额定值与电气特性
| Device Type | CoolRunner-II complex programmable logic device |
| Number of Macrocells | 32 macrocells |
| Equivalent Logic Gates | 750 gates |
| User I/O Count | 33 user I/O |
| Total Pin Count | 56 pins |
| Device Speed Grade | 6 ns |
| Pin-to-Pin Logic Delay | 3.8 ns |
| System Frequency | 200 MHz |
| Core Supply Voltage | 1.8 V |
| Supported LVCMOS I/O Voltages | 1.8 V, 2.5 V, and 3.3 V |
| Technology | 0.18 µm CMOS |
| 静态电流 | As low as 12 µA |
| Configuration Type | In-system programmable |
| Package Type | 56-pin CSBGA |
| Package Dimensions | 6 × 6 mm |
| Package Pitch | 0.50 mm |
| 安装类型 | Surface mount |
| I/O Bank Count | 2 banks |
| Lead-Free Status | Lead free |
| RoHS 状态 | RoHS compliant |
| Programmer Support | Supported for XC2C32A as XC2C32 CP56 device family |
XC2C32A-6CPG56C 0.50 mm 引脚配置指南
XC2C32A-6CPG56C(0.50 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC2C32A-6CPG56C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC2C32A-6CPG56C 适用于 6 应用s: Industrial Control Sequencing, Low-Power Portable Device Control, Interface Consolidation and Glue Logic, Display and Peripheral Interface Logic, Legacy JTAG and Test-Control Support, Battery and Power Management Support.
Industrial Control Sequencing
The XC2C32A-6CPG56C fits compact industrial control logic that requires deterministic state-machine behavior and nonvolatile configuration. Its 32 macrocells can implement sequencing, interlocks, alarm logic, and interface control, while 33 user I/O provide ample connections to sensors, actuators, and field-bus transceivers. The 1.8 V core reduces supply complexity in mixed-signal equipment, and the 6 ns grade supports timing-sensitive control paths. For deployments with extended environmental requirements, evaluate the industrial-temperature XC2C32A-6CPG56I and confirm its timing and lifecycle status before schematic release.
推荐
Low-Power Portable Device Control
The XC2C32A-6CPG56C is useful in portable products where a small programmable-logic block must consolidate several discrete functions. Its 32 macrocells can implement power sequencing, button logic, display control, and low-speed peripheral interfacing, while the reported quiescent current as low as 12 µA supports battery-conscious operation. The 56-pin CSBGA occupies only 6 × 6 mm and helps constrain board area. Designers should account for the device's obsolete lifecycle and verify that the available configuration memory, I/O standards, and sleep behavior meet the product's energy budget.
推荐
Interface Consolidation and Glue Logic
The XC2C32A-6CPG56C can consolidate asynchronous interface bridging, command decoding, bus arbitration, and protocol conversion around a host processor. Thirty-three user I/O allow multiple signal groups to be connected without using the largest CPLD in the family, and the 1.8 V core suits modern host platforms. Because the device supports LVCMOS interfaces at 1.8 V, 2.5 V, and 3.3 V, it can bridge selected voltage domains when bank and signal-integrity requirements are satisfied. Validate every external interface against the DS310 timing tables and ensure the configuration design preserves required test and recovery paths.
推荐
Display and Peripheral Interface Logic
The XC2C32A-6CPG56C fits display-adjacent and peripheral-control designs that need deterministic timing conversion without a large FPGA. Its 32 macrocells can implement character generators, display command sequencing, keypad scanning, and programmable indicator control, with 33 I/O available for panel signals and auxiliary buses. The compact 6 × 6 mm CSBGA helps shorten routing in space-constrained control boards, while the 6 ns grade supports reasonably quick control paths. Confirm voltage compatibility and edge-rate behavior in DS310, particularly when driving loads through external buffers or level translators.
推荐
Legacy JTAG and Test-Control Support
The XC2C32A-6CPG56C can implement glue logic for legacy JTAG chains, boundary-test coordination, programmable fixtures, and production test adapters. Its 32 macrocells are suitable for instruction decoding, muxing, state tracking, and control-signal generation, while 33 user I/O support several instruments or target buses. Programming compatibility is documented for the XC2C32 CP56 device family, which assists when configuring legacy boards. Confirm pin multiplexing, configuration-security settings, and adapter voltage before connecting a programmer, and verify the full design on hardware because boundary behavior can differ from ordinary user logic.
推荐
Battery and Power Management Support
The XC2C32A-6CPG56C can supervise charger state, battery thresholds, sequencing signals, and load-enable logic in compact power systems. Its 1.8 V core and low quiescent current are beneficial in battery-operated equipment, while the 33 user I/O allow monitoring of several analog signals through external components or converters. The CPLD can combine debounce, timer, and state-machine functions that would otherwise occupy several discrete devices. Because no integrated analog measurement function is established for this MPN, sensor signals still require suitable external interfaces, and all power rails must meet the exact operating and I/O limits defined in DS310.
推荐
推荐产品汇总
工程参考数据: XC2C32A-6CPG56C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC2C32A-6CPG56I | XC2C32A-4CPG56C | XC2C32-6CPG56C | XC2C32A-6CP56C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 56-pin CSBGA | 56-pin CSBGA - same | 56-pin CSBGA - same | 56-pin CSBGA - same | 56-pin CSBGA - same |
| Macrocells | 32 macrocells | 32 macrocells | 32 macrocells | 32 macrocells | 32 macrocells |
| Speed Grade | 6 ns | 6 ns | 4 ns | 6 ns | 6 ns |
| Core Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Equivalent Logic Gates | 750 gates | 750 gates | 750 gates | 750 gates | 750 gates |
| Technology | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS |
| Temperature Grade | Commercial grade | Industrial grade | Commercial grade | Commercial grade | Commercial grade |
| I/O Bank Count | 2 banks | 2 banks | 2 banks | 1 bank | 2 banks |
关键差异点
- Higher speed grade than the 4 ns alternative (对比 XC2C32A-4CPG56C)
- Commercial-temperature configuration without the industrial suffix (对比 XC2C32A-6CPG56I)
- Enhanced two-bank I/O organization (对比 XC2C32-6CPG56C)
设计说明
Build the PCB footprint directly from the 56-pin CSBGA land pattern in AMD DS310. The package is only 6 × 6 mm with a 0.50 mm pitch, so copied dimensions should be checked against the fabricator's minimum line width, spacing, solder-mask expansion, and assembly registration capability. Confirm whether the exposed thermal feature is electrically connected, and preserve the manufacturer-specified power and ground ball pattern rather than substituting a generic BGA array.
Separate core and I/O supply planning from the logic-design task. The device is optimized around a 1.8 V core, while supported LVCMOS interfaces may operate at 1.8 V, 2.5 V, or 3.3 V under specified conditions. Assign compatible signals to the correct bank, observe input thresholds and output-load limits, and decouple each supply close to its associated balls. Recheck the exact voltage rules and decoupling guidance in DS310 before releasing the schematic.
Estimate board-level heating from the actual macrocell activity and I/O switching rather than relying on a single quiescent-current figure. The package transfers heat through its solder balls and PCB copper, so provide copper beneath the device and thermal vias where the board stack-up permits. For low-power legacy boards, start with a conservative activity estimate, measure junction or board temperature during worst-case operation, and add copper or vias if the result approaches the device rating.
Do not assume that every XC2C32-family ordering code is an interchangeable production choice. A speed-grade change can alter timing margins, the C-versus-I suffix changes temperature qualification, and the XC2C32 to XC2C32A transition adds a second I/O bank. Verify the exact ball map, timing tables, configuration method, and temperature range in DS310. Also obtain a current availability and traceability statement because the original family is obsolete.
合规信息
Published component records identify the device as RoHS compliant and lead free. No AEC-Q100 qualification, REACH status, halogen-free declaration, or conflict-minerals statement is established for this commercial-grade MPN.