XC3S1000-4FG320C - 1M Spartan-3 FPGA | AMD | 320-FBGA
料号: XC3S1000-4FG320C ✗ 停产XC3S1000-4FG320C 概述
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are defined by a configuration bitstream rather than a fixed circuit mask. An FPGA belongs to the programmable-logic hierarchy alongside CPLDs, combines millions of equivalent gates with configurable memory and I/O blocks, and operates as a reconfigurable digital subsystem within a larger embedded system.
The Spartan-3 architecture provides 1,920 logic cells organized as configurable logic blocks, along with 442,368 RAM bits for on-chip data storage and distributed memory. Its 221 user I/O support high-speed interface logic, while the 19 x 19 mm 320-FBGA package keeps a one-million-gate design compact. The core operates from 1.14 V to 1.26 V, and the listed operating junction-temperature range is 0°C to 85°C.
The -4 ordering code identifies a defined speed grade within the Spartan-3 performance range. A listing for this exact family identifies a 630 MHz performance figure, 90 nm process technology, and 1.2 V core operation. These characteristics suit parallel data capture, protocol bridging, general control logic, and multi-channel digital processing rather than high-throughput processor software workloads.
Typical deployments include industrial automation controllers, telecom line-interface equipment, test and measurement instruments, high-speed data-acquisition systems, and embedded displays. Because the device combines substantial logic, dedicated block RAM, and 221 I/O in one package, it can consolidate several discrete logic devices into one configurable implementation while preserving hardware-level timing control.
PCB design should account for the BGA escape-routing requirement, power-plane integrity, and the device's substantial dynamic current demand. Use the pin-description table, recommended decoupling network, and package-specific land pattern in the AMD Spartan-3 family documentation. Confirm the configuration interface, bank supply requirements, and unused-ball treatment before releasing the layout for fabrication.
This page adds engineering-focused comparison data, drop-in variant guidance, design notes, and application-specific reasoning that are not arranged in the same form in the manufacturer family datasheet. It is intended to help designers confirm package compatibility, resource adequacy, speed grade, and thermal expectations before integrating the FPGA into a new board.
直接替换替代料: XC3S1000-4FG320C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC3S1000-4FG320C (相同外形与封装尺寸) ——差异在于 Core Supply Voltage, Package, Process Technology.
XC3S1000-4FGG320C
✅ 直接替换📋 参考替代料(不在目录中)
XC3S1000-5FG320C
✅ 直接替换联系询价
查看数据手册 →XC3S1000-4FG320I
✅ 直接替换📋 参考替代料(不在目录中)
XC3S1000-4FGG320I
✅ 直接替换📋 参考替代料(不在目录中)
XC3S1000-5FGG320C
✅ 直接替换📋 参考替代料(不在目录中)
XC3S1000L-4FG320C
✅ 直接替换📋 参考替代料(不在目录中)
XC3S1000-4FG320C 最大额定值与电气特性
| FPGA Family | Spartan-3 |
| System Gates | 1,000,000 gates |
| Logic Cells | 17,280 cells |
| Configurable Logic Blocks | 1,920 CLBs |
| Block RAM | 442,368 bits |
| User I/O | 221 I/O |
| Performance Figure | 630 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.14 V to 1.26 V |
| Nominal Core Voltage | 1.2 V |
| 工作结温 | 0°C to 85°C |
| 封装 | 320-FBGA, 19 x 19 mm |
| Package Type | 320-ball Fine-pitch Ball Grid Array |
| 安装类型 | Surface Mount |
| Speed Grade | -4 |
| Programmable Logic | 17,280 configurable logic cells |
XC3S1000-4FG320C 320-ball fine-pitch ball grid array 引脚配置指南
XC3S1000-4FG320C(320-ball fine-pitch ball grid array 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC3S1000-4FG320C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC3S1000-4FG320C 适用于 6 应用s: Industrial Automation Controller, Telecommunications Line Interface, High-Speed Data Acquisition, Test and Measurement Front End, Protocol Bridge and Interface Hub, Embedded Video and Display Control.
Industrial Automation Controller
The XC3S1000-4FG320C fits compact PLC and machine-control boards that combine sequencing logic with multiple peripheral interfaces. Its 17,280 logic cells can implement motion-control state machines, safety interlocks, counters, and communication protocols, while 442,368 RAM bits support data buffering and diagnostic history. The 221 I/O allow expansion for encoders, sensors, actuators, and isolated field buses. The 1.14 V to 1.26 V core range and 320-FBGA package simplify dense control designs, although final power and timing budgets must be verified against the -4 speed grade and the 0°C to 85°C listed junction range.
推荐
Telecommunications Line Interface
Use the XC3S1000-4FG320C in telecom line-card and protocol-conversion designs that require parallel logic and numerous external signals. The one-million-system-gate capacity and 1,920 configurable logic blocks accommodate framing logic, CRC processing, and multiplexing, while 442,368 RAM bits can buffer packet or channel data. Its 221 I/O support parallel data buses and multiple lower-speed management ports. The 320-FBGA package also provides enough routing flexibility for a substantial backplane interface, but the board designer must follow the AMD recommended power, decoupling, and ball-escape guidance and verify setup-and-hold margins after implementation.
推荐
High-Speed Data Acquisition
The XC3S1000-4FG320C can serve as the digital control and capture fabric in a parallel data-acquisition instrument. Its programmable logic can implement trigger pipelines, channel interleaving, formatting, and data compression, while the 442,368 RAM bits provide on-chip capture and buffering. The 221 I/O are useful for parallel ADC outputs, clock distribution, and synchronization signals. A 630 MHz family performance figure supports internal pipeline designs, although actual acquisition throughput depends on I/O standards, board-level timing, and the selected speed grade. Validate skew, clock jitter, and I/O drive requirements against the AMD device documentation.
推荐
Test and Measurement Front End
The XC3S1000-4FG320C is appropriate for instrument front ends that require coordinated logic, data storage, and extensive I/O in a single programmable device. A laboratory or industrial tester could use its 17,280 logic cells for instrument control, binning, and pattern generation, while 442,368 RAM bits capture intermediate results. The 221 I/O connect to DUT fixtures, ADC and DAC interfaces, and status channels. The device's 90 nm Spartan-3 implementation and 1.2 V core are appropriate for a stable legacy platform, but thermal performance, analog isolation, and high-speed edge rates need separate engineering treatment in the analog and layout sections of the design.
推荐
Protocol Bridge and Interface Hub
The XC3S1000-4FG320C works well as a multi-protocol bridge when legacy interfaces must be consolidated into a common datapath. The programmable logic can translate bus timing, packet framing, and handshake rules, and 442,368 RAM bits provide queues or command storage between channels. With 221 I/O, the device can accommodate several parallel buses plus control signals without requiring multiple medium-density FPGAs. Its 320-FBGA footprint helps keep the bridge close to associated memory and transceiver devices. The main design trade-off is routing complexity: a multi-bus bridge can approach I/O and timing limits quickly, so pin planning and post-route verification are essential.
推荐
Embedded Video and Display Control
The XC3S1000-4FG320C can implement timing generation, pixel remapping, overlay composition, and interface control for embedded display systems. Its 17,280 logic cells provide enough parallel datapath resources for moderate-resolution timing logic, while 442,368 RAM bits support line buffers, character storage, or frame-plane management. The 221 I/O are useful for parallel pixel buses, synchronization outputs, and configuration ports. Because BGA escape routing limits high-speed signal fan-out, the design should use short point-to-point connections and controlled clock distribution. Confirm the required display timing and memory bandwidth during architecture selection rather than relying only on the 630 MHz family figure.
推荐
推荐产品汇总
工程参考数据: XC3S1000-4FG320C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC3S1000-4FGG320C | XC3S1000-5FG320C | XC3S1000-4FG320I | XC3S1000-4FGG320I | XC3S1000-5FGG320C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 320-FBGA (19x19) | 320-FBGA (19x19) | 320-FBGA (19x19) | 320-FBGA (19x19) | 320-FBGA (19x19) | 320-FBGA (19x19) |
| FPGA Family | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 |
| Speed Grade | -4 | -4 | -5 | -4 | -4 | -5 |
| Process Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
关键差异点
- Matches the established -4 Spartan-3 timing class without changing footprint (对比 XC3S1000-5FG320C)
- Provides the same listed core resources in the alternate G ordering suffix (对比 XC3S1000-4FGG320C)
- Uses the same 320-FBGA mechanical platform as the faster grade (对比 XC3S1000-5FGG320C)
- Commercial ordering option for designs covered by the listed temperature range (对比 XC3S1000-4FG320I)
设计说明
Design the 1.2 V core rail as a dedicated, low-impedance supply rather than sharing a filtered rail with unrelated analog loads. Follow the AMD DS099 recommended decoupling values and place each decoupling capacitor immediately beside its associated supply balls. Route core current through multiple power and ground planes, and check the configuration activity and I/O switching current against the board-level supply budget. Decoupling placement and plane transitions usually influence dynamic voltage performance more than nominal rail resistance alone.
Use the exact 320-FBGA land pattern and ball map for the selected Spartan-3 ordering code; do not substitute a generic 320-ball BGA footprint. Plan escape routing, via-in-pad use, and solder-mask conditions around the package perimeter. High-speed I/O should route through short, symmetrical paths with minimal stubs, and clock-capable pins should receive controlled clock distribution. Validate escape geometry and solder assembly capability with the board fabricator before fabrication release.
Estimated: core dissipation depends on configuration density, I/O switching, and the actual VDD-versus-VTT core voltage. For a 1.14 V core and 1.20 V output, the estimated voltage-drop loss is I_core multiplied by 0.06 V; for example, a 0.5 A core current produces about 30 mW of voltage-drop loss before accounting for internal and I/O dissipation. Use actual post-layout activity and thermal-impedance data for the final junction-temperature estimate rather than relying on gate count alone.
Do not treat a different package ball count or a larger Spartan-3 package as a mechanical substitution. XC3S1000-4FG456C and XC3S1000-4FT256C change the available I/O and routing structure, so they require a PCB redesign even when the logic-cell count is similar. Likewise, changing from the commercial C grade to an I grade changes the environmental qualification rather than the core resources. Review ordering information, package drawings, and the original schematic before approving any substitution.
合规信息
The commercial Spartan-3 FPGA is not an automotive-qualified AEC-Q100 product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation for the exact ordering code and current supplier documentation.