XC3S100E-4TQG144I - 100K Gate Spartan-3E FPGA | AMD
料号: XC3S100E-4TQG144I ✗ 停产XC3S100E-4TQG144I 概述
A field-programmable gate array, or FPGA, is a semiconductor whose digital functions are defined after fabrication through a configuration bitstream. Within the product hierarchy, the XC3S100E belongs to the Spartan-3E FPGA family and implements configurable logic blocks, programmable I/O, embedded memory, dedicated multipliers, and clock-management resources. This makes it more flexible than a fixed-function application-specific integrated circuit while offering a different performance, power, and software-development profile from a microcontroller.
Key features include 240 configurable logic blocks, 2,160 logic cells, 108 user I/O pins, and up to 100,000 equivalent system gates. The maximum listed clock frequency is 572 MHz, while the 90 nm CMOS process supports integration of programmable logic and dedicated fixed resources on one device. The TQFP-144 package provides 144 physical leads with a 0.5 mm terminal pitch and occupies a 22 mm by 22 mm footprint.
The device is designed for parallel digital datapaths, control logic, protocol bridging, signal processing, and general embedded system control. Its resources can be combined in parallel to create wide data paths, while dedicated digital clock managers support controlled clock distribution and phase management. The 108 user I/O pins are distributed through the package, allowing external memory, converters, communication transceivers, and custom interfaces to be connected without requiring a separate large-format programmable device.
Typical uses include industrial control, data-acquisition systems, instrumentation, communications equipment, embedded video processing, and legacy digital platforms that require configurable hardware. Designers can implement parallel ADC or DAC interfaces, packet-processing functions, custom peripheral controllers, and mixed logic functions in one FPGA. The 144-lead TQFP package is also practical for boards where a leaded component simplifies inspection, repair, or manual assembly compared with a very fine-pitch BGA.
For a new PCB, use the manufacturer pin table and package drawing to assign power, ground, configuration, clock, and user-I/O connections. Place bypass capacitors close to the supply pins, route configuration signals away from high-speed nets, and keep every clock and data trace properly terminated. Because the TQFP has exposed leads on all four sides, confirm connector clearance and solder-assembly access around the 22 mm by 22 mm body.
This product page combines the key device specifications, verified family documentation, practical integration guidance, and clearly identified same-footprint alternatives. It also distinguishes the industrial-temperature suffix and lead-free package options so engineers can assess replacement suitability without assuming that every similarly named Spartan-3E ordering code has identical environmental or procurement requirements.
直接替换替代料: XC3S100E-4TQG144I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC3S100E-4TQG144I (相同外形与封装尺寸) ——差异在于 Device Type, System Gates.
XC3S100E-4TQG144C
✅ 直接替换📋 参考替代料(不在目录中)
XC3S100E-4TQ144I
✅ 直接替换联系询价
查看数据手册 →XC3S100E-4TQG144CS1
✅ 直接替换📋 参考替代料(不在目录中)
XC3S100E-4TQG144I 最大额定值与电气特性
| Device Type | Spartan-3E Field Programmable Gate Array |
| System Gates | 100,000 gates |
| Logic Cells | 2,160 cells |
| Configurable Logic Blocks | 240 CLBs |
| User I/O Pins | 108 pins |
| 最大时钟频率 | 572 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| 封装 | 144-pin TQFP |
| Package Body Size | 22 mm x 22 mm |
| Package Height | 1.6 mm |
| Lead Pitch | 0.5 mm |
| Total Lead Count | 144 leads |
| Logic Array Blocks | 240 LABs |
| 安装类型 | Surface mount |
| Lead-Free Status | Lead free |
XC3S100E-4TQG144I 1.6 mm 引脚配置指南
XC3S100E-4TQG144I(1.6 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC3S100E-4TQG144I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC3S100E-4TQG144I 适用于 6 应用s: Industrial Data-Acquisition and Control, Communications Protocol Bridging, Precision Instrumentation Signal Processing, Embedded Video and Display Timing, Legacy Industrial Interface Consolidation, Programmable Logic and Educational Platforms.
Industrial Data-Acquisition and Control
The AMD XC3S100E-4TQG144I fits compact industrial acquisition systems that must coordinate sensors, converters, memory, and actuator controls in real time. Its 2,160 logic cells and 240 configurable logic blocks can implement sampling state machines, digital filtering, calibration tables, and communication formatting, while 108 user I/Os provide ample connections for external converters and isolated interfaces. The 144-pin TQFP package is practical for leaded board-assembly processes, and the 90 nm CMOS implementation supports a maximum clock frequency of 572 MHz. A designer should partition acquisition timing from control logic and use dedicated clock resources to keep sampling paths deterministic.
推荐
Communications Protocol Bridging
The XC3S100E-4TQG144I can bridge legacy parallel interfaces to serial links or implement packet buffering in embedded communications equipment. The 240 CLBs are well suited to parallel-to-serial conversion, framing, byte stuffing, flow control, and first-in first-out buffering, while dedicated Spartan-3E multipliers and memory resources can support checksum or payload processing. With 108 user I/Os, the design can retain an existing parallel bus while adding a serial transceiver. Clock-domain crossings should use the family’s dedicated clock-management resources, with timing constraints and board-level trace matching applied to high-speed data lines.
推荐
Precision Instrumentation Signal Processing
The AMD XC3S100E-4TQG144I is appropriate for digital signal-processing front ends that convert precision converter outputs into useful measurements. Its 2,160 logic cells can implement digital filters, correlation functions, peak detection, and calibration correction, while the 572 MHz maximum clock supports parallel datapaths. The 108 user I/Os allow simultaneous connection to ADCs, DACs, status signals, and memory. For instrumentation-grade performance, the FPGA logic should be divided into carefully pipelined stages, clock distribution should use dedicated resources, and I/O timing must be constrained against the actual board and converter characteristics.
推荐
Embedded Video and Display Timing
The XC3S100E-4TQG144I can implement legacy display timing, pixel processing, test-pattern generation, and interface adaptation in compact video equipment. Its programmable logic supports horizontal and vertical counters, blanking generation, color lookup, and frame synchronization, while 108 user I/Os can connect parallel pixel data and control signals. The TQFP-144 package avoids a fine-pitch BGA and is accessible to prototype and repair workflows. Video timing should be generated from the FPGA's dedicated clock network, and output interface voltage, synchronization polarity, and board signal integrity should be verified against the target display specification.
推荐
Legacy Industrial Interface Consolidation
The AMD XC3S100E-4TQG144I helps modernize equipment that combines obsolete parallel control logic with newer serial peripherals. Its 108 user I/Os can preserve direct connections to motors, relays, encoders, and legacy memory, while programmable logic translates those signals into commands for modern serial transceivers. The 100K Spartan-3E resource level allows protocol conversion and supervisory control without a large FPGA. Design migration should begin with a pin-by-pin I/O map, followed by static timing analysis, power cycling tests, and a review of the I/O voltage tolerances required by each connected legacy device.
推荐
Programmable Logic and Educational Platforms
The XC3S100E-4TQG144I is well suited to FPGA education, logic laboratory platforms, and proof-of-concept boards because it combines a substantial 2,160-cell Spartan-3E device with 108 user I/Os in an accessible 144-lead package. Students can implement processors, state machines, serial links, memory controllers, and peripheral demonstrations without a very fine-pitch BGA. Its maximum 572 MHz clock supports modern introductory Verilog and VHDL laboratory designs. Because the part is an older family member, a new development platform should include a modern interface bridge and an explicit programming workflow so the legacy device remains reproducible without depending on unsupported software.
推荐
推荐产品汇总
工程参考数据: XC3S100E-4TQG144I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC3S100E-4TQG144C | XC3S100E-4TQ144I | XC3S100E-4TQG144CS1 |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | TQFP-144 | TQFP-144 - same | TQFP-144 - same | TQFP-144 - same |
| Logic Cells | 2,160 cells | 2,160 cells | 2,160 cells | 2,160 cells |
| Configurable Logic Blocks | 240 CLBs | 240 CLBs | 240 CLBs | 240 CLBs |
| User I/O Pins | 108 pins | 108 pins | 108 pins | 108 pins |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Environmental Ordering Code | Industrial suffix I | Commercial suffix C | Industrial suffix I with TQ ordering code | Commercial suffix C with S1 ordering code |
关键差异点
- Industrial-grade ordering option for equipment operating beyond commercial conditions (对比 XC3S100E-4TQG144C)
- Full 108-user-I/O interface in a 144-lead leaded package (对比 XC3S100E-4VQG100C)
- Higher logic density while retaining a 144-pin footprint (对比 XC3S100E-4CPG132C)
- Lead-free TQFP construction supports accessible board assembly (对比 XC3S100E-4TQG144CS1)
设计说明
Use the TQFP-144 land pattern from the AMD Spartan-3E Family Data Sheet DS312 and preserve clearances around all four rows of leads. The package is listed as 22 mm by 22 mm with a 0.5 mm pitch, so fanout is limited by fine-pitch soldering and routing density. Place the device away from connector edges, provide thermal copper where practical, and route power and ground pins directly to the associated planes without long stubs.
Design the 1.2 V core rail and auxiliary I/O supplies as separate power paths, following the exact pin grouping and decoupling requirements in DS312. Place the smallest effective bypass capacitors immediately beside the relevant supply leads, then add bulk capacitance near the regulator output. Validate the design across the selected Spartan-3E speed grade and I/O activity because switching-dependent current can be substantially higher than the static core demand.
Constrain every clock using the dedicated clock-management resources and apply board-level delay compensation only where the timing budget requires it. Keep configuration pins away from high-speed switching nets, provide defined states for configuration and control signals during power transitions, and follow the manufacturer guidance for unused I/O. For external memories or converters, match data and clock trace lengths where source-synchronous timing depends on a fixed relationship.
Do not treat similarly named TQFP-144 orderings as automatic substitutions. The C and I suffixes distinguish commercial and industrial environmental grades, while TQ and TQG affect the ordering identifier. Before replacing XC3S100E-4TQG144I, compare the DS312 ordering table, temperature limits, configuration requirements, pin functions, and any customer-specific approved-part list. Verify the actual package drawing rather than inferring compatibility from the number of leads alone.
合规信息
The ordering information identifies the XC3S100E-4TQG144I as lead-free. A complete RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification declaration was not established for the exact device.