XC4VLX25-11SF363C - 24,192-Cell Virtex-4 LX FPGA | AMD
料号: XC4VLX25-11SF363C ✗ 停产XC4VLX25-11SF363C 概述
A field-programmable gate array is a programmable digital semiconductor that combines configurable logic, registers, block RAM, dedicated input/output resources, and programmable interconnect blocks on one device. Within the product hierarchy, the XC4VLX25 is an FPGA within the Virtex-4 LX family and a member of AMD's broader semiconductor portfolio. Its architecture allows parallel datapath, control, signal-processing, and interface logic to be consolidated into one device rather than assembled from separate logic devices.
The principal device characteristics include 24,192 logic cells, 2,688 configurable logic blocks, 240 user I/Os, 90 nm CMOS construction, and a nominal 1.2 V supply. The -11 suffix denotes the device speed grade, while SF363 identifies the package and commercial temperature configuration. These features make the XC4VLX25 suitable for communications, industrial control, test equipment, embedded processing, and high-density digital interface systems requiring substantially more parallel logic than small CPLDs.
The Virtex-4 LX architecture supports programmable interconnect, block RAM, dedicated DSP resources, and selectable I/O standards. Engineers can distribute clocking, use dedicated input and output resources, and implement parallel signal-processing or packet-handling functions. Because this is an established FPGA family, design tools and intellectual-property ecosystems are mature; however, new designs must account for the device's legacy process, large BGA package, power characteristics, and end-of-life migration considerations.
Typical deployments include telecom line-card control, video and image-processing pipelines, industrial automation, instrumentation, storage interfaces, and embedded communications gateways. The 240 available I/Os make the device particularly useful for systems combining multiple buses, parallel data acquisition, clock distribution, and on-chip memory. A clock-enabled serial transceiver is also included for high-speed point-to-point links in suitable configurations.
PCB implementation requires careful power-plane design, decoupling, controlled impedance routing, and thermal analysis. The 363-ball FCBGA package requires X-ray inspection and appropriate PCB assembly capability, while power sequencing must follow the device's configuration and startup requirements. Engineers should preserve the documented pinout, decoupling network, and voltage tolerances, and should not assume that a higher-speed grade is a complete replacement unless its timing, temperature grade, and bitstream compatibility are confirmed.
This product page combines the exact XC4VLX25-11SF363C identification, package details, family specifications, sourced replacement guidance, application guidance, and practical design considerations. It also distinguishes true same-footprint upgrade options from broader FPGA migrations, helping engineering teams preserve an existing 363-ball board when possible or plan a deliberate redesign when legacy-device constraints dominate.
直接替换替代料: XC4VLX25-11SF363C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC4VLX25-11SF363C (相同外形与封装尺寸) ——差异在于 Package, Device Type, Logic Cells, User I/O, Speed Grade.
XC4VLX25-12SF363C
✅ 直接替换联系询价
查看数据手册 →XC4VLX25-10SF363C
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC4VLX25-11SF363I
✅ 直接替换联系询价
查看数据手册 →XC4VLX25-11SFG363C
✅ 直接替换📋 参考替代料(不在目录中)
XC4VLX25-12SFG363C
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC4VLX25-11SF363C 最大额定值与电气特性
| Device Type | Virtex-4 LX Field Programmable Gate Array |
| Logic Cells | 24,192 cells |
| Configurable Logic Blocks | 2,688 CLBs |
| User I/O | 240 I/Os |
| Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Device Speed Grade | -11 |
| Temperature Grade | Commercial, 0°C to 85°C junction temperature |
| 封装 | 363-ball FCBGA |
| Package Designation | SF363 |
| Ball Pitch | 0.800 mm |
XC4VLX25-11SF363C sf363 引脚配置指南
XC4VLX25-11SF363C(sf363 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC4VLX25-11SF363C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC4VLX25-11SF363C 适用于 6 应用s: Telecommunications Line-Card Control, Industrial Automation and Control, Video and Image Processing, Test and Measurement Instrumentation, Storage and Data Acquisition, Aerospace and Defense Support Systems.
Telecommunications Line-Card Control
The XC4VLX25-11SF363C fits legacy telecommunications line-card control because its 24,192 logic cells and 240 I/Os can consolidate framing, routing, supervision, and interface-control logic in one Virtex-4 LX FPGA. The -11 speed grade provides timing capability across parallel datapaths, while the 363-ball FCBGA supports the dense interconnect required by multi-channel equipment. Engineers can place protocol state machines, packet buffers, and clock-domain logic alongside external memory and transceiver interfaces. The main design consideration is legacy-tool availability and the need to confirm clock rates and I/O timing against the complete system specification rather than assuming later FPGA families can be substituted without a board change.
推荐
Industrial Automation and Control
The XC4VLX25-11SF363C is suitable for industrial automation systems that combine parallel I/O, deterministic control, data acquisition, and communication protocols. Its 2,688 configurable logic blocks and 240 user I/Os provide substantial capacity for motor-control sequencing, sensor conditioning logic, safety interlocks, and machine communication. The 90 nm CMOS implementation and 1.2 V core supply support established Virtex-4 board architectures, while the commercial-temperature version targets 0°C to 85°C junction operation. For machinery with wider environmental requirements, the 11SF363I option preserves the same footprint but changes the temperature grade, making board-level thermal validation and component qualification essential.
推荐
Video and Image Processing
The XC4VLX25-11SF363C can implement legacy video and image-processing pipelines requiring parallel pixel transport, filtering, color conversion, and frame timing. Its 24,192 logic cells allow multiple parallel processing stages, while 240 I/Os provide interfaces for pixel data, clocks, synchronization, and control. Designers can allocate configurable logic blocks and block resources according to the selected architecture, then close timing around the -11 speed grade and external memory interface. Because the device belongs to an established Virtex-4 platform, it is particularly useful for maintaining existing equipment, but thermal performance, memory bandwidth, and pin assignment must be verified for the particular resolution and frame-rate target.
推荐
Test and Measurement Instrumentation
The XC4VLX25-11SF363C is well matched to legacy test and measurement instruments requiring extensive parallel control, acquisition timing, and synthesis or calibration logic. Its 240 I/Os can connect instruments, trigger systems, counters, converters, and memories, while 2,688 configurable logic blocks support coordinated datapaths. The device's established -11 speed grade makes it useful for preserving validated Virtex-4 instrumentation platforms, and the 363-ball FCBGA provides a high pin count without a large leaded footprint. Instrumentation designers should budget clean clock distribution, controlled-impedance routing, and separate analog and digital grounding, then confirm acquisition-path timing and thermal behavior on the assembled board.
推荐
Storage and Data Acquisition
The XC4VLX25-11SF363C supports storage-controller, data-acquisition, and buffer-management designs that combine multiple parallel data paths. Its 24,192 logic cells can handle read and write sequencing, error detection, command interpretation, and data formatting, while 240 I/Os support memory devices, buses, and status signals. The SFC363 package provides a dense land pattern that has already been used in established Virtex-4 platforms, reducing mechanical redesign risk when preserving an existing board. Engineers should calculate interface timing for the selected external memory and evaluate internal-resource utilization and I/O drive requirements; a higher -12 speed grade may simplify timing closure but does not replace board-level signal-integrity validation.
推荐
Aerospace and Defense Support Systems
The XC4VLX25-11SF363C can be evaluated for legacy aerospace, defense, and rugged embedded-support systems that retain Virtex-4 hardware and require abundant logic and I/O resources. It can implement interface adapters, command processors, telemetry logic, and redundant control paths in a 363-ball FCBGA package. However, the commercial C temperature suffix is not automatically appropriate for demanding environmental programs. The 11SF363I option preserves the device and footprint while providing an industrial temperature grade, yet aerospace deployment also requires program-specific qualification, traceability, radiation-impact analysis, and controlled configuration procedures. The replacement decision should therefore be based on system assurance requirements rather than package compatibility alone.
推荐
推荐产品汇总
工程参考数据: XC4VLX25-11SF363C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC4VLX25-12SF363C | XC4VLX25-10SF363C | XC4VLX25-11SF363I | XC4VLX25-11SFG363C | XC4VLX25-12SFG363C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 363-ball FCBGA | 363-ball FCBGA - same footprint | 363-ball FCBGA - same footprint | 363-ball FCBGA - same footprint | 363-ball FCBGA - same footprint | 363-ball FCBGA - same footprint |
| Logic Cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells |
| Configurable Logic Blocks | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs |
| User I/O | 240 I/Os | 240 I/Os | 240 I/Os | 240 I/Os | 240 I/Os | 240 I/Os |
| Speed Grade | -11 | -12, faster than target | -10, slower than target | -11, same | -11, same | -12, faster than target |
| Temperature Designation | C, commercial | C, commercial | C, commercial | I, industrial | C, commercial | C, commercial |
| Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Lead-Free Designation | Standard C suffix | Standard C suffix | Standard C suffix | Standard C suffix | G suffix, lead-free | G suffix, lead-free |
关键差异点
- Direct same-footprint upgrade path (对比 XC4VLX25-12SF363C)
- Industrial-temperature option without mechanical redesign (对比 XC4VLX25-11SF363I)
- Lead-free drop-in configuration (对比 XC4VLX25-11SFG363C)
- Slower speed grade remains footprint-compatible (对比 XC4VLX25-10SF363C)
设计说明
Treat the 363-ball FCBGA as a high-density assembly constraint rather than a conventional peripheral-lead package. Assign power and ground directly from the Virtex-4 packaging and pinout specification, preserve the manufacturer's recommended ball assignments, and provide adjacent decoupling connections with very short return paths. Validate the PCB stack-up, escape routing, via current capacity, and assembly process with the exact package drawing before fabrication.
Design the supply network for the documented 1.2 V core and any required auxiliary rails without substituting values from another Virtex-4 package. Use separate, well-decoupled supply paths for the core and I/O-related supplies, and follow the manufacturer's sequencing and voltage-monotonicity requirements. Because a faster -12 replacement can change dynamic power, re-evaluate power and thermal margins even though its footprint is unchanged.
Estimate junction temperature from total board-level power, package thermal characteristics, airflow, copper area, and the selected PCB material rather than relying only on ambient temperature. Use the manufacturer's package thermal data and the applicable board-environment assumptions for the final calculation. Commercial C-grade operation is limited to a 0°C to 85°C junction-temperature range, while self-heating can consume much of that margin in dense Virtex-4 designs.
Do not treat C, I, and G package suffixes as interchangeable without reviewing their meanings and the complete ordering information. A speed-grade change can alter timing and power, a temperature-grade change can alter the permissible environment, and the G designation identifies a lead-free configuration. For any proposed replacement, compare the full ordering code, confirm the 363-ball map, rebuild or validate constraints, and verify bitstream compatibility at the system level.
合规信息
The XC4VLX25-11SFG363C listing identifies a lead-free device, but no separate RoHS, REACH, halogen-free, conflict-minerals, or automotive qualification declaration is stated for the target MPN.