XC5VLX110-2FF676C - 110,592 Logic Cell Virtex-5 LX FPGA | AMD
料号: XC5VLX110-2FF676C ✗ 停产XC5VLX110-2FF676C 概述
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O functions are configured after fabrication. Within the product hierarchy, an FPGA is a programmable logic device and semiconductor. It differs from a fixed-function application-specific integrated circuit because engineers can update its parallel processing architecture, interface mapping, and hardware acceleration blocks to support evolving system requirements without changing the physical PCB design.
The XC5VLX110 device provides 110,592 logic cells and 4,608 Kb of block RAM according to the AMD Virtex-5 LX device information. The -2 suffix identifies the device speed grade, while the C suffix identifies the commercial-temperature option. Its 676-FCBGA package supports a large pin count and dense connections to surrounding PCB layers, enabling high aggregate I/O bandwidth. The package also increases assembly complexity because routing between the BGA balls and common fabrication rules must be controlled carefully.
Virtex-5 LX devices combine configurable logic, programmable interconnect, dedicated block RAM, dedicated DSP resources, and selectable I/O standards. This mixed architecture allows a single FPGA to implement parallel datapaths, buffering, protocol conversion, and control functions. The exact supported I/O standards, clocking resources, DSP count, and configuration-memory organization should be confirmed in the manufacturer data sheet for the specific device revision before a board design is released.
Typical uses include telecommunications line-card interface processing, industrial automation, video and image pipelines, scientific instrumentation, networking equipment, and embedded signal-processing controllers. The large logic population is particularly useful where multiple parallel channels must share a common clock and interconnect fabric. Such designs benefit from deterministic architecture, but system performance still depends on correct clocking, memory bandwidth constraints, timing closure, and the speed grade selected for the operating environment.
PCB implementation should reserve independent high-quality power planes for core and I/O supplies, place decoupling capacitors close to the BGA power balls, and maintain uninterrupted reference-plane returns beneath high-speed routes. A 676-ball FCBGA assembly requires thermal-via arrays or equivalent heat-spreading structures beneath the device. Signal-integrity and power-integrity simulation should include package parasitics, connector or transceiver launch behavior, and worst-case switching activity.
This page combines device identity, package constraints, sourcing information, replacement analysis, and practical implementation guidance. Its comparison material highlights the changes between speed grade, temperature grade, and package ordering codes so engineers can distinguish a genuine drop-in option from a larger footprint that would require redesign.
直接替换替代料: XC5VLX110-2FF676C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC5VLX110-2FF676C (相同外形与封装尺寸) ——差异在于 Package Type, Temperature Grade.
XC5VLX110-2FF676I
✅ 直接替换联系询价
查看数据手册 →XC5VLX110-2FFG676I
✅ 直接替换📋 参考替代料(不在目录中)
XC5VLX110-1FF676C
✅ 直接替换联系询价
查看数据手册 →XC5VLX110-1FFG676I
✅ 直接替换📋 参考替代料(不在目录中)
XC5VLX110-2FF676C 最大额定值与电气特性
| Product Type | Virtex-5 LX field-programmable gate array |
| Logic Cells | 110,592 cells |
| Block RAM | 4,608 Kb |
| Speed Grade | -2 |
| Temperature Grade | Commercial, 0 °C to 85 °C junction |
| 封装 | 676-FCBGA, 27 × 27 mm |
| Package Type | 676-ball FCBGA |
| 安装类型 | Surface mount |
| Device Family | Virtex-5 LX |
| FPGA Architecture | Configurable logic, programmable interconnect, block RAM, and dedicated DSP resources |
| 工作温度 | 0 °C to 85 °C junction |
XC5VLX110-2FF676C 676-ball fcbga 引脚配置指南
XC5VLX110-2FF676C(676-ball fcbga 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC5VLX110-2FF676C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC5VLX110-2FF676C 适用于 6 应用s: Telecommunications Line-Card Processing, Industrial Automation and Motion Control, Video and Image Processing Pipelines, Scientific Instrumentation and Signal Processing, Networking and Packet Processing, Embedded Control and Test Systems.
Telecommunications Line-Card Processing
The XC5VLX110-2FF676C fits parallel telecommunications line-card functions because its 110,592 logic cells can implement multiple channels of framing, filtering, traffic shaping, and interface adaptation within one Virtex-5 LX device. The -2 speed grade supports designs that require stronger timing performance than the -1 alternative, while the commercial 0 °C to 85 °C junction range requires enclosure-temperature verification. The 676-FCBGA footprint provides the pin density needed for high-speed transceiver links, although every lane must be length-matched and the complete design must pass signal-integrity simulation.
推荐
Industrial Automation and Motion Control
The XC5VLX110-2FF676C is suitable for industrial automation controllers that combine parallel machine vision, encoder processing, timing, and motion-control logic in a single programmable device. Its 110,592 logic cells provide substantially more parallel capacity than a small microcontroller, and the dedicated block RAM supports packet buffering and deterministic data movement. Designers should place the controller in an enclosure where calculated junction temperature remains below 85 °C, or move to an industrial-temperature alternative. Separate power and ground planes, local decoupling, and careful clock routing are essential for reliable operation.
推荐
Video and Image Processing Pipelines
The XC5VLX110-2FF676C can implement parallel image-acquisition, color conversion, pixel transport, and compression control because 110,592 logic cells can be partitioned across several fixed-function pipelines. The 4,608 Kb of block RAM supplies dedicated on-chip storage for line buffers and working data without depending on external memory for every access. Video designs should constrain high-speed interfaces, preserve continuous return paths, and synchronize external memory interfaces with the FPGA clocking architecture. Because the commercial suffix limits junction temperature to 85 °C, thermal analysis should include FPGA activity, adjacent regulators, and the final PCB stack-up.
推荐
Scientific Instrumentation and Signal Processing
The XC5VLX110-2FF676C suits parallel acquisition, digital filtering, calibration, and data-format conversion in scientific instruments where firmware flexibility is valuable. Its 110,592 logic cells can implement multiple concurrent channels, while 4,608 Kb of block RAM can support coefficient storage and sample buffering. The -2 speed grade should be retained when timing analysis depends on the original performance baseline. For high-rate analog front ends, constrain converter interfaces carefully and evaluate board-level skew, jitter, and power-supply noise. If internal operation will exceed 85 °C junction temperature, use an industrial-temperature device instead of assuming the commercial part will remain reliable.
推荐
Networking and Packet Processing
The XC5VLX110-2FF676C is appropriate for networking equipment requiring parallel packet classification, header processing, traffic shaping, and buffering in programmable hardware. Its large logic population allows dedicated processing lanes to operate concurrently, while the 4,608 Kb of block RAM provides local storage for descriptors and packet windows. Pin-compatible industrial variants can extend environmental capability without changing the board outline. Ethernet and serial interfaces must nevertheless be constrained against the correct clock domains, and the power network must remain quiet during high switching activity. Confirm exact user-I/O counts and supported electrical standards before assigning all physical-layer interfaces.
推荐
Embedded Control and Test Systems
The XC5VLX110-2FF676C can consolidate parallel control, test sequencing, protocol conversion, and acquisition logic in embedded test equipment. A large block of configurable logic allows multiple instrument channels to be synchronized while retaining reconfigurability across product variants. The same FF676 package is retained by the identified AMD alternatives, but speed and temperature changes require new timing and environmental reviews. The dense BGA layout demands via-in-pad or via-adjacent thermal structures under the FPGA, short decoupling connections, and continuous reference planes. Use the package-specific pinout files rather than a family-level drawing when assigning configuration, clock, and power balls.
推荐
推荐产品汇总
工程参考数据: XC5VLX110-2FF676C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC5VLX110-2FF676I | XC5VLX110-2FFG676I | XC5VLX110-1FF676C | XC5VLX110-1FFG676I |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 676-FCBGA (27 × 27 mm) | 676-FCBGA (27 × 27 mm) - same | 676-FCBGA (27 × 27 mm) - same | 676-FCBGA (27 × 27 mm) - same | 676-FCBGA (27 × 27 mm) - same |
| Device | XC5VLX110 | XC5VLX110 | XC5VLX110 | XC5VLX110 | XC5VLX110 |
| Logic Cells | 110,592 cells | 110,592 cells | 110,592 cells | 110,592 cells | 110,592 cells |
| Block RAM | 4,608 Kb | 4,608 Kb | 4,608 Kb | 4,608 Kb | 4,608 Kb |
| Speed Grade | -2 | -2 | -2 | -1 | -1 |
| Temperature Grade | Commercial, 0 °C to 85 °C junction | Industrial | Industrial | Commercial | Industrial |
| Device Family | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
关键差异点
- Original -2 performance baseline (对比 XC5VLX110-1FF676C)
- Commercial-temperature procurement fit (对比 XC5VLX110-2FF676I)
- Exact device and package continuity (对比 XC5VLX110-2FFG676I)
- Lower-risk timing preservation (对比 XC5VLX110-1FFG676I)
设计说明
Treat the FF676 package as a concentrated heat source and provide copper spreading beneath the BGA, thermal vias into inner layers, and an enclosure path that removes heat from the junction. Calculate worst-case activity-dependent dissipation and junction temperature with the actual PCB stack-up rather than a nominal package value. The commercial ordering code is intended for a 0 °C to 85 °C junction range, so margin should be reserved for ambient variation, neighboring heat sources, airflow restrictions, and manufacturing variation. If the calculated operating condition cannot maintain that range, move to an industrial-temperature ordering code.
Create a low-impedance power-delivery network for every voltage rail required by the selected Virtex-5 LX device, with planes sized for simultaneous switching current and a low-impedance return path beneath the FPGA. Place decoupling capacitors close to the relevant BGA power and ground balls and follow the capacitor values and placement rules in the manufacturer power-guidance document. Validate the network with a dynamic voltage-drop simulation under maximum logical activity. A static resistance calculation will not capture package inductance, plane transitions, and transient current demanded by the configurable logic and block RAM.
Route the 676-BGA escape pattern according to the package-specific design rules, using multilayer through-via fanout where necessary and preserving the manufacturer’s ball-pad, solder-mask, and paste recommendations. Do not treat every ball as a high-speed signal; keep power and ground structures compact and provide uninterrupted reference planes under signal routes. Match clock and source-synchronous interfaces to their data paths, add configurable termination only after signal-integrity analysis, and avoid test-point or via structures in sensitive return paths. Complete escape routing before committing to component placement around the dense package.
Constrain all external interfaces against the clock domains in which they actually operate, because the Virtex-5 interconnect is timing-driven rather than a fixed central-bus architecture. Use the exact FF676 pinout file to separate configuration pins, clocks, user I/O, power, and ground. For high-rate links, include package and board parasitics in simulation, control skew across the source and destination devices, and preserve return-path continuity. Leave configuration access available for diagnostics and field updates, and verify that any alternative ordering code uses the same ball assignments and configuration behavior.
Avoid selecting an FPGA only by logic-cell count. Confirm block RAM, dedicated DSP resources, user-I/O availability, speed grade, temperature range, package dimensions, configuration method, and lifecycle status. The XC5VLX110-1FF676C retains the 676-ball package but uses a different speed grade, while FF1154 and FFG1760 devices use different footprints and cannot be treated as drop-ins. A replacement should be accepted only after its exact ordering code is checked against the package file, the design is recompiled, timing is rerun, and environmental qualification is documented.
合规信息
The ordering code identifies a commercial-temperature Virtex-5 LX device, but specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation or declaration for the exact ordering code.