XC5VLX30T-1FFG665CES - 30,720 Logic Cell Virtex-5 LXT FPGA | Xilinx
料号: XC5VLX30T-1FFG665CES ✓ 量产中XC5VLX30T-1FFG665CES 概述
What is a Virtex-5 LXT FPGA? The LXT platform sits between the smaller LX and the larger LX25T members of the Virtex-5 family and is optimised for designs that mix substantial logic fabric with moderate embedded memory and hard DSP resources. Each Virtex-5 device contains CLBs built from configurable logic blocks, distributed RAM, and hard multipliers arranged in DSP48E slices, while dedicated 36 kb block RAM tiles provide deterministic on-chip storage. The result is an FPGA - a reconfigurable digital integrated circuit that belongs to the broader class of programmable logic devices and programmable system components used for high-speed signal processing, protocol bridging and hardware acceleration.
Key features of this device include the -1 speed grade, a core supply range of 0.95 V to 1.05 V, and an extended-temperature ordering option rated from 0 C to 85 C junction temperature. The suffix ES designation indicates the extended commercial-temperature build supplied in tray packaging, which suits volume OEM and contract manufacturing flows rather than tape-and-reel high-speed insertion.
Technically, the device uses the second-generation ASMBL column-based architecture, with I/O blocks distributed around the periphery of the die and each user pin capable of supporting multiple I/O standards and programmable impedance. Configuration is handled through the standard Virtex-5 configuration interface, allowing bitstream reload, partial reconfiguration and multi-bit CRC detection of the configuration memory.
Typical deployments include telecommunications line-card and base-station equipment, industrial automation controllers, defense avionics and radar front ends, broadcast video processing, network packet-switching line cards, and instrumentation and test systems where deterministic multi-lane throughput is required in a single device.
One practical design consideration is thermal and power planning: because a 30,720-cell device can draw substantial core current at 1.05 V, the PCB must provide a low-impedance, decoupled supply network with dedicated plane copper and via stitching around the 665-ball footprint to keep di/dt-induced droop within the core tolerance.
This page consolidates device specifications, drop-in alternatives for the 665-FCBGA footprint, and practical design guidance that engineers can apply directly when qualifying this Virtex-5 LXT part for a new board or a legacy design refresh.
直接替换替代料: XC5VLX30T-1FFG665CES ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC5VLX30T-1FFG665CES (相同外形与封装尺寸) ——差异在于 Device Type, Package, Process Technology.
XC5VLX30T-1FFG665C
✅ 直接替换📋 参考替代料(不在目录中)
XC5VLX30T-1FFG665I
✅ 直接替换📋 参考替代料(不在目录中)
XC5VLX30T-1FFG665C4060
✅ 直接替换📋 参考替代料(不在目录中)
XC5VLX30T-1FF665C
✅ 直接替换联系询价
查看数据手册 →XC5VLX30-1FFG665I
✅ 直接替换📋 参考替代料(不在目录中)
XC5VLX30T-1FFG665CES 最大额定值与电气特性
| Device Type | Virtex-5 LXT Field Programmable Gate Array (FPGA) |
| Logic Elements | 30,720 |
| Configurable Logic Blocks (CLBs) / Logic Array Blocks (LABs) | 2,400 |
| User I/O Pins | 360 |
| Total RAM Bits | 1,327,104 bits |
| Core Supply Voltage Range | 0.95 V to 1.05 V |
| Process Technology | 65 nm CMOS (ASMBL column-based architecture) |
| Speed Grade | -1 |
| 工作结温范围 | 0 C to 85 C |
| 封装 | 665-FCBGA (27 x 27 mm), flip-chip ball grid array |
| 安装类型 | Surface mount |
| Shipping Method | Tray |
| Number of Balls | 665 |
XC5VLX30T-1FFG665CES 665-fcbga (27 x 27 mm), flip-chip ball grid array 引脚配置指南
XC5VLX30T-1FFG665CES(665-fcbga (27 x 27 mm), flip-chip ball grid array 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC5VLX30T-1FFG665CES.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC5VLX30T-1FFG665CES 适用于 6 应用s: Telecommunications Line-Card and Baseband Equipment, Industrial Automation and Motion Control, Defence Avionics and Radar Signal Front Ends, Broadcast Video and Image Processing, Network Packet Switching and Line-Card Acceleration, Test, Measurement and Instrumentation Prototyping.
Telecommunications Line-Card and Baseband Equipment
The XC5VLX30T-1FFG665CES fits line-card and base-station baseband designs because 360 user I/O allow wide parallel buses, backplane interfaces and tributary traffic paths to be consolidated into one device, while 30,720 logic elements absorb framing, scrambling and protocol state machines. Its 1,327,104 RAM bits provide enough buffer for packet queues and cross-connect switching fabric, and the 0.95 V to 1.05 V core rail matches modern low-voltage SerDes and optical module rails. With 0 C to 85 C junction operation, it suits indoor or climate-controlled telecom rooms where thermal headroom is limited; the industrial -1FFG665I variant is the choice for outdoor cabinets.
推荐
Industrial Automation and Motion Control
In PLC and industrial controller platforms, the XC5VLX30T-1FFG665CES handles timer/counter logic, fieldbus protocol engines and I/O expansion in a single device, with 2,400 CLBs providing the parallelism needed for multi-axis sequencing and safety monitoring. The 360 user I/O spread across all four sides of the die allows dense I/O ring routing in a 27 x 27 mm FCBGA footprint, which keeps the controller board compact. Embedded RAM supports state-machine tables and diagnostic history, and the 0 C to 85 C range covers most factory-floor enclosures with basic airflow. For cold-room or outdoor machinery, the -1FFG665I industrial grade is the correct variant.
推荐
Defence Avionics and Radar Signal Front Ends
The XC5VLX30T-1FFG665CES is used in defence avionics and radar front-end modules where deterministic parallel throughput, small board area and proven silicon longevity matter more than the newest logic density. Thirty thousand logic elements allow complete radar timing, azimuth/elevation tracking and I/Q datapath control to be consolidated, and the 1,327,104 RAM bits hold sample buffers and correlation tables close to the processing logic. Because these programs target long field lifetimes, procurement teams commonly standardise on a single ordering code across programmes; the -1FFG665I industrial variant covers -40 C to 85 C for military vehicle and airborne equipment environments.
推荐
Broadcast Video and Image Processing
Video scaling, colour processing and frame-buffer management in broadcast and professional capture equipment map directly onto the XC5VLX30T-1FFG665CES resource set: 2,400 CLBs provide the pixel-parallel pipeline logic, while 1,327,104 RAM bits act as line and frame buffers without external memory in many designs. The 360 user I/O supports parallel pixel buses, ancillary data channels and multi-format input/output interfaces to external converters. A 1 V core rail keeps board-level power budgets manageable alongside high-speed video PHY devices, and the 665-FCBGA footprint on a 27 x 27 mm land pattern suits compact mezzanine and open-frame card designs used in studio and OB equipment.
推荐
Network Packet Switching and Line-Card Acceleration
Packet-switching line cards built around the XC5VLX30T-1FFG665CES use its wide I/O bank for parallel datapath interfaces to switch silicon and backplane routing fabrics, and its logic array for header parsing, classification and queue management. The 1,327,104 RAM bits are sized for moderate-depth packet buffers and descriptor structures close to the lookup logic, cutting external memory access latency in time-critical forwarding paths. The 0.95 V to 1.05 V core range matches the supply rails of contemporary network silicon, simplifying power-tree partitioning. The same footprint supports 65 nm cost-down programmes as carriers migrate from first-generation switching silicon to a consolidated FPGA-based line card.
推荐
Test, Measurement and Instrumentation Prototyping
For instrumentation, protocol analysers and automated test platforms, the XC5VLX30T-1FFG665CES allows acquisition logic, pattern generation and real-time analysis to sit in one device, with 360 user I/O driving multi-channel instrumentation and 30,720 logic elements providing the throughput for real-time DSP filtering. Its 1,327,104 RAM bits support deep capture windows without off-chip memory, and the configurable I/O blocks allow a single board to cover LVDS, single-ended and other interface mixes depending on the pin assignment. Designers evaluating the part in a laboratory will note that the 665-FCBGA land pattern and 27 x 27 mm outline need careful ball-grid fanout and X-ray inspection at prototype stage.
推荐
推荐产品汇总
工程参考数据: XC5VLX30T-1FFG665CES ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC5VLX30T-1FFG665C | XC5VLX30T-1FFG665I | XC5VLX30T-1FFG665C4060 | XC5VLX30T-1FF665C | XC5VLX30-1FFG665I |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 665-FCBGA (27 x 27 mm) | 665-FCBGA (27 x 27 mm) - same | 665-FCBGA (27 x 27 mm) - same | 665-FCBGA (27 x 27 mm) - same | 665-FCBGA (27 x 27 mm) - same | 665-FCBGA (27 x 27 mm) - same |
| Logic Elements | 30,720 | 30,720 | 30,720 | 30,720 | 30,720 | 30,720 |
| User I/O Pins | 360 | 360 | 360 | 360 | 360 | 360 |
| Total RAM Bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits | 1,327,104 bits |
| Core Supply Voltage | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V |
| Speed Grade | -1 | -1 | -1 | -1 with 4060 milestone suffix | -1 | -1 |
| CLBs / LABs | 2,400 | 2,400 | 2,400 | 2,400 | 2,400 | 2,400 |
关键差异点
- Exact die and footprint match across every drop-in option (对比 XC5VLX30T-1FFG665C)
- Extended commercial-temperature treatment with tray supply for OEM volumes (对比 XC5VLX30T-1FFG665C)
- Industrial-grade alternation keeps the same PCB when cold environments are required (对比 XC5VLX30T-1FFG665I)
- Deliberate sizing for mid-complexity designs instead of over-provisioned silicon (对比 XC5VLX50T-1FFG665I)
设计说明
The 665-FCBGA land pattern on a 27 x 27 mm outline requires strict fanout: route every signal out on the same layer with a maximum of one via, keep the escape trace length under roughly 2.5 mm, and build a solid ground plane under the entire device to return high-frequency switching current. Place the nearest bypass capacitors directly beneath the outer ball rows where the footprint allows, and provide dedicated VCCINT and VCCAUX plane cuts with via stitching at the array edge to prevent core-rail droop during configuration and full-utilisation switching.
Estimated: with a 1.05 V core rail and a full 30,720-cell design at roughly 25% utilisation, average core current on a -1 grade Virtex-5 LXT is in the region of 1 A, giving about 1 W of core dissipation; add the I/O bank contribution and auxiliary rails and total device power typically lands in the 1.5 W to 2.5 W range. With the 665-FCBGA (27 x 27 mm) thermal path, junction rise stays manageable under natural convection if the board provides a full copper pour and the enclosure has modest airflow. In sealed or high-temperature cabinets, specify the industrial -1FFG665I grade and re-check the 85 C junction ceiling after any utilisation increase.
Do not treat the -1FFG665C, -1FFG665I and -1FFG665CES ordering codes as interchangeable without checking the temperature grade and packaging suffix against your enclosure environment, and do not assume a 665-FCBGA device can be hand-reworked: the ball pitch means a single bridged or missing ball is not repairable and will fail inspection. Verify configuration memory settings, the DONE and INIT_B pin handling, and the startup ramp of the core rail before releasing the design to manufacturing, because an improper power-up sequence can damage a device that is otherwise electrically sound.
Keep high-speed I/O such as differential pairs and memory interfaces on the same layer with continuous reference-plane return, and avoid routing them across the die's core-supply ball fields where plane transitions would force return-path discontinuity. Place the configuration interface and JTAG chain away from the fastest signal region so that configuration activity does not add noise into sensitive channels. If the design mixes LVDS and single-ended I/O on the same bank, check the banking rules in the device datasheet and keep the ACN and output-enable standards of a bank consistent.
合规信息
The AMD Xilinx Virtex-5 LXT family is a mature 65 nm platform; RoHS, REACH, lead-free and halogen-free declarations for this specific ordering code were not stated in the product information retrieved for this page, so the fields are left as unknown rather than assumed. AEC-Q100 does not apply to this industrial/commercial FPGA family. Confirm the material compliance status for the exact ordering code with the manufacturer before release to a regulated market.