XC5VLX50-1FFG324C - 46,080-Cell FPGA | AMD | Industrial Control
料号: XC5VLX50-1FFG324C ✗ 停产XC5VLX50-1FFG324C 概述
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic can be configured after manufacture. An FPGA sits above simple fixed-function logic in the device hierarchy: configurable logic blocks and programmable interconnect replace a fixed gate-level design, while block RAM, DSP48E slices, clocking resources, and I/O blocks provide dedicated functions. The Virtex-5 LX architecture therefore supports parallel data processing, high-speed interfaces, protocol bridging, embedded control, and configurable signal processing within a single programmable platform.
Key resources include 46,080 logic cells organized as 3,600 configurable logic blocks, 1,769,472 total RAM bits, 220 user I/Os, and 48 DSP48E slices. The device uses 65 nm CMOS technology and a 1 V core supply identified by the listing as a 0.95 V to 1.05 V operating range. Its 324-FCBGA surface-mount package supports dense board-level integration while exposing high-performance interconnect and dedicated resources.
The XC5VLX50-1FFG324C belongs to the Virtex-5 LX family, combining a general-purpose FPGA fabric with dedicated DSP48E processing. This architecture is suitable when the design requires parallel lanes, substantial buffering, programmable data paths, or multiple interface domains. The DSP48E slices can accelerate multiply-accumulate and similar arithmetic operations, while distributed and block RAM support buffering, packetization, lookup, and data-width conversion.
Typical uses include industrial automation, communications infrastructure, test and measurement, embedded signal processing, storage interfaces, and high-speed network equipment. In these systems, the FPGA can consolidate parallel data acquisition, protocol conversion, clock-domain coordination, and control logic while preserving software-programmability for field updates and product variation.
PCB design requires careful attention to the package ball map, power planes, decoupling, differential routing, and thermal management. Use the AMD Virtex-5 package pinout files and UG195 packaging guidance to assign every ball and follow the device-specific power, decoupling, and high-speed layout recommendations. Verify the selected design tools, memory interface configuration, pin constraints, and bitstream target against the exact device speed grade before release.
This page consolidates device resources, package details, replacement guidance, and practical integration considerations to help engineers compare the XC5VLX50-1FFG324C with its direct alternatives and plan a compatible high-performance FPGA implementation.
直接替换替代料: XC5VLX50-1FFG324C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC5VLX50-1FFG324C (相同外形与封装尺寸) ——差异在于 Package, Device Type, Temperature Grade, Mounting Type, Logic Cells.
XC5VLX50-1FFG324I
✅ 直接替换联系询价
查看数据手册 →XC5VLX50-1FFG324C 最大额定值与电气特性
| Device Type | Virtex-5 LX FPGA |
| Logic Cells | 46,080 cells |
| Configurable Logic Blocks | 3,600 CLBs |
| Total RAM Bits | 1,769,472 bits |
| DSP48E Slices | 48 slices |
| User I/Os | 220 I/Os |
| Process Technology | 65 nm CMOS |
| Core Supply Voltage | 1 V |
| Core Operating Voltage Range | 0.95 V to 1.05 V |
| 封装 | 324-ball FCBGA, 19 mm x 19 mm |
| Package Type | FCBGA-324 |
| 安装类型 | Surface mount |
| Number of Package Balls | 324 balls |
| Product Family | Virtex-5 LX |
| Programmable Logic | 46,080 configurable logic cells |
| Dedicated DSP Resources | 48 DSP48E slices |
| Temperature Grade | Commercial grade |
| RoHS 状态 | Compliant |
XC5VLX50-1FFG324C 324 balls 引脚配置指南
XC5VLX50-1FFG324C(324 balls 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC5VLX50-1FFG324C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC5VLX50-1FFG324C 适用于 6 应用s: Industrial Automation Controller, Communications Interface Consolidation, Precision Data Acquisition, Test and Measurement Instrumentation, Network Storage Interface, Embedded Signal Processing.
Industrial Automation Controller
The XC5VLX50-1FFG324C fits industrial automation controllers that coordinate sensors, motion-control logic, interlocks, and communications in one programmable device. Its 46,080 logic cells can implement sequencing and control state machines, while 3,600 configurable logic blocks support parallel datapaths and protocol adapters. The 220 user I/Os provide substantial connectivity for field buses and discrete interfaces, and the 48 DSP48E slices can accelerate filtering or position-processing functions. Designers should separate noisy drive circuits from the FPGA supply network, follow the AMD decoupling recommendations, and use the exact XC5VLX50-1FFG324C pin file when assigning I/O standards.
推荐
Communications Interface Consolidation
The XC5VLX50-1FFG324C is suitable for communications equipment that must consolidate multiple packet paths, serial interfaces, buffers, and protocol conversion functions. The 1,769,472 RAM bits can support packet buffering and line-rate data movement, while 46,080 logic cells can implement framing, header processing, and traffic management. With 220 user I/Os, the device can support parallel backplanes as well as high-speed transceivers through external PHY devices. Timing closure requires disciplined clock planning, controlled-length routing for critical interfaces, and power-integrity analysis that accounts for simultaneous switching across the large FCBGA device.
推荐
Precision Data Acquisition
The XC5VLX50-1FFG324C can serve as the digital backbone of a precision acquisition system, coordinating parallel ADC output data, triggering, calibration tables, and data transfer. Its 48 DSP48E slices provide dedicated arithmetic resources for finite impulse response filtering, digital downconversion, and correction, while the FPGA fabric manages control and formatting. The 220 user I/Os are useful when several converters or interface chips must be synchronized. Designers should establish deterministic clocking, constrain input timing carefully, and verify the analog and digital grounding strategy so switching activity does not degrade the accuracy of the measurement chain.
推荐
Test and Measurement Instrumentation
The XC5VLX50-1FFG324C fits programmable test equipment requiring flexible timing, pattern generation, real-time analysis, and instrument control. The 3,600 configurable logic blocks can support concurrent test channels, while 1,769,472 RAM bits allow deep sample capture and look-up data. Dedicated DSP48E slices can accelerate transforms, correlation, and filtering without consuming every general-purpose logic resource. For accurate results, engineers should use low-skew clock distribution, calibrated I/O standards, and separate analog and digital power sections. The 324-ball FCBGA also demands via-in-pad-aware assembly planning and close inspection of solder-joint quality.
推荐
Network Storage Interface
The XC5VLX50-1FFG324C is appropriate for storage controllers, protocol bridges, and data-plane adapters that move information between parallel logic and high-speed serial links. Its 46,080 logic cells can support command processing, error management, and queue control, while 1,769,472 RAM bits provide FIFOs and buffer storage. The 220 user I/Os accommodate parallel NAND, memory, and board-level control connections when external transceivers handle the physical layer. A robust design should use the AMD Virtex-5 memory-interface guidance, constrain timing for the selected memory topology, and perform power-integrity analysis for simultaneous high-speed and high-volume storage traffic.
推荐
Embedded Signal Processing
The XC5VLX50-1FFG324C supports embedded signal-processing systems that combine configurable control logic with dedicated multiply-accumulate hardware. Its 48 DSP48E slices are suited to filtering, modulation, correlation, and spectral-processing stages, while the general-purpose fabric handles buffering and system control. The 1,769,472 RAM bits can hold coefficients and intermediate samples, reducing pressure on external memory for many workloads. Designers should map arithmetic into DSP48E slices instead of replicating them in LUT logic, pipeline for the required clock rate, and review vendor timing guidance before adding further stages or raising the operating frequency.
推荐
推荐产品汇总
工程参考数据: XC5VLX50-1FFG324C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC5VLX50-1FFG324I |
|---|---|---|
| Package | 324-FCBGA, 19 mm x 19 mm | 324-FCBGA, 19 mm x 19 mm |
| Brand | AMD | AMD |
| Product Family | Virtex-5 LX | Virtex-5 LX |
| Logic Cells | 46,080 cells | 46,080 cells |
| Configurable Logic Blocks | 3,600 CLBs | 3,600 CLBs |
| Total RAM Bits | 1,769,472 bits | 1,769,472 bits |
| DSP48E Slices | 48 slices | 48 slices |
| User I/Os | 220 I/Os | 220 I/Os |
| Process Technology | 65 nm CMOS | 65 nm CMOS |
| Core Supply Voltage | 1 V, with a 0.95 V to 1.05 V operating range | 1 V, with a 0.95 V to 1.05 V operating range |
| Temperature Grade | Commercial grade | Industrial grade |
| Mounting Type | Surface mount | Surface mount |
关键差异点
- Provides the same core resource complement as the documented industrial-grade option (对比 XC5VLX50-1FFG324I)
- Commercial temperature option for systems that do not require the industrial suffix (对比 XC5VLX50-1FFG324I)
- Combines general-purpose logic, block memory, and DSP in one 324-ball device (对比 M2GL050-1VF400)
设计说明
Assign the board from the AMD Virtex-5 package pinout files for the exact XC5VLX50-1FFG324C device. Confirm every power, ground, configuration, clock, and user-I/O ball before schematic release. Follow UG195 for FCBGA escape routing, via-in-pad options, solder-mask and paste design, and package-specific PCB rules. Do not infer ball assignments from the 676-ball XC5VLX50-1FFG676C because both parts share the family name but use different packages.
Build the power tree around the listed 1 V core supply and its 0.95 V to 1.05 V operating range. Place high-frequency decoupling capacitance directly at the appropriate supply and ground balls, provide adequate bulk capacitance near the device, and isolate noisy I/O or external-circuit supplies. Validate transient response, simultaneous-switching behavior, and power sequencing against the device documentation before layout signoff.
A 324-ball FCBGA with a 19 mm by 19 mm footprint can concentrate heat near the device center, so power dissipation should be evaluated at the actual target frequency, resource utilization, I/O activity, and ambient temperature. Provide uninterrupted ground-plane area beneath the package, use the board stack-up and copper features recommended by AMD, and apply thermal vias where the package design supports them. Confirm the operating junction-temperature margin rather than relying on board area alone.
Constrain all device-specific clocks and high-speed interfaces before implementation, and treat power, ground, and configuration connections as critical. Keep the Virtex-5 configuration interface away from noisy sources and observe the required pull-up or termination values specified by AMD. After routing, inspect the implementation report for unconstrained paths and verify all I/O standards and bank voltage relationships in the pin constraints.
Do not treat XC5VLX50-1FFG324I, XC5VLX50-1FFG324C, and XC5VLX50-1FFG676C as interchangeable references. The first two differ in temperature grade but share the 324-FCBGA package, whereas the 676 suffix denotes a different package and cannot be dropped into a 324-ball board layout. Also avoid packaging-only order-code variants as engineering substitutes without checking the exact manufacturer configuration and procurement documentation.
合规信息
The commercial-grade device is identified as RoHS compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration was established for this exact ordering code.