XC6SLX25T-3CSG324C - 24,051-Cell Spartan-6 LXT FPGA | AMD
料号: XC6SLX25T-3CSG324C ✓ 量产中XC6SLX25T-3CSG324C 概述
A field-programmable gate array is a semiconductor whose logic, memory, signal processing, and I/O functions are configured after fabrication. An FPGA sits between fixed-function logic devices and software-programmable processors. It combines parallel hardware execution, reconfigurable resources, and deterministic control in the hierarchy of programmable logic devices, semiconductors, and digital processing systems.
The XC6SLX25T-3CSG324C includes 1,879 configurable logic blocks, approximately 30,064 registers, and 76 multiplier blocks described as 18-by-18 multipliers. Two GTP transceivers operate up to 3.2 Gbps, while one PCI block supports PCI interface designs. The 190 user I/Os support integration with external memory, control circuitry, communication links, and mixed-signal systems.
The -3 designation identifies the highest-performance Spartan-6 LXT speed grade, while CSG324 identifies the 324-ball chip-scale package. The C suffix denotes the commercial temperature option, and the product is specified for surface mounting with a 0.8 mm ball pitch. Its 45 nm CMOS implementation balances programmable logic density with integrated RAM, DSP, high-speed serial transceivers, and PCI resources.
Typical uses include industrial control, automotive electronics, embedded processing, communications equipment, video and image processing, and general-purpose interface consolidation. The combination of 38 DSP48A1 slices supports parallel filtering and fixed-point arithmetic, while the dual GTP transceivers support high-speed serial links. Its 190 I/Os make it suitable for designs requiring substantially more external connectivity than a small microcontroller provides.
PCB implementation should follow AMD's official Spartan-6 package pinout files and power-supply recommendations. The 324-ball package requires careful escape routing, clean power distribution across multiple supply rails, and thermal analysis based on actual utilization. Because FPGA timing depends on routing, speed grade, and I/O placement, system-level validation should include post-place-and-route timing analysis rather than relying only on estimated clock frequencies.
This page combines the device architecture, package constraints, order-code differences, practical replacement criteria, and engineering-oriented comparisons that help designers distinguish a true pin-compatible substitution from an FPGA that merely offers similar logic capacity.
直接替换替代料: XC6SLX25T-3CSG324C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC6SLX25T-3CSG324C (相同外形与封装尺寸) ——差异在于 Device Type, Block RAM, Package Type, Temperature Grade, User I/O.
XC6SLX25T-3CSG324I
✅ 直接替换联系询价
查看数据手册 →XC6SLX25T-3NCSG324C
✅ 直接替换📋 参考替代料(不在目录中)
XC6SLX25T-2CSG324I
✅ 直接替换联系询价
查看数据手册 →XC6SLX25T-2CSG324C
✅ 直接替换联系询价
查看数据手册 →XC6SLX25T-1LCSG324C
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC6SLX25T-3CSG324C 最大额定值与电气特性
| Device Type | Spartan-6 LXT field-programmable gate array |
| Logic Cells | 24,051 cells |
| Configurable Logic Blocks | 1,879 CLBs |
| Registers | 30,064 registers |
| Block RAM | 936 Kbit |
| DSP48A1 Slices | 38 slices |
| Multiplier Blocks | 76 18 x 18 multipliers |
| GTP Transceivers | 2 transceivers |
| Maximum Transceiver Data Rate | 3.2 Gbps |
| PCI Blocks | 1 PCI block |
| User I/O | 190 I/Os |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Device Speed Grade | -3 performance grade |
| 封装 | 324-CSPBGA, 15 mm x 15 mm |
| Ball Pitch | 0.8 mm |
| 安装类型 | Surface mount |
| 工作结温 | 0 C to 85 C |
| Maximum Internal Frequency | 862 MHz |
XC6SLX25T-3CSG324C 324-cspbga, 15 mm x 15 mm 引脚配置指南
XC6SLX25T-3CSG324C(324-cspbga, 15 mm x 15 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC6SLX25T-3CSG324C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC6SLX25T-3CSG324C 适用于 6 应用s: Industrial Control Systems, Automotive Information and Control, High-Speed Serial Communications, DSP Signal Processing, Embedded Data Acquisition, PCI Interface Consolidation.
Industrial Control Systems
The XC6SLX25T-3CSG324C fits industrial controllers requiring deterministic parallel logic, configurable I/O, and local communication. Its 1,879 CLBs and 30,064 registers can implement motion sequencing, interlocks, counters, and machine-state logic, while 190 user I/Os support sensors, actuators, encoders, and operator interfaces. The 0 C to 85 C operating-junction-temperature range suits controlled indoor equipment. Use the 936 Kbit of block RAM for buffers or trace history and the 38 DSP48A1 slices for filtering and signal conditioning. Final timing must be verified after place-and-route because routing and I/O assignments influence achievable clock rates.
推荐
Automotive Information and Control
The Spartan-6 LXT architecture supports automotive information and control designs that combine configurable logic with serial communication. The XC6SLX25T-3CSG324C provides 190 I/Os for body, comfort, and peripheral control functions, plus two GTP transceivers capable of reaching 3.2 Gbps for high-speed serial links. Its DSP resources can accelerate filtering and arithmetic within sensor-processing paths. The commercial C suffix is limited to a 0 C to 85 C operating-junction-temperature range, so engineers should choose an automotive-qualified order code when the system requires a broader temperature range or formal AEC-Q100 qualification.
推荐
High-Speed Serial Communications
Two integrated GTP transceivers make the XC6SLX25T-3CSG324C appropriate for designs that combine programmable control logic with high-speed serial connectivity. Each transceiver supports rates up to 3.2 Gbps, allowing the FPGA to implement serial protocols, data movement, clock recovery, and test functions while the CLBs handle supervisory logic. The 324-CSPBGA's 190 user I/Os permit simultaneous access to sensors, memories, and external control components. Board design must provide controlled-length differential routing, suitable grounding, and power delivery that meets the transceiver's channel and device requirements under the selected operating conditions.
推荐
DSP Signal Processing
The XC6SLX25T-3CSG324C integrates 38 DSP48A1 slices and 76 18-by-18 multipliers, allowing a compact design to perform parallel fixed-point operations without external DSP devices. Suitable tasks include digital filtering, modulation support, sensor conditioning, and error-correction functions. The 936 Kbit of block RAM can hold coefficient tables, sample buffers, and intermediate data close to the arithmetic resources, reducing external memory traffic in suitable architectures. Use synchronous pipelines and deliberate clock-domain boundaries, and verify DSP clock performance through implementation timing reports rather than assuming the maximum device frequency applies to every design.
推荐
Embedded Data Acquisition
The combination of 190 I/Os, programmable logic, block RAM, and DSP resources supports compact data-acquisition systems that must collect and process parallel sensor channels. A design can implement acquisition control, timestamp handling, digital filtering, and data formatting while the 324-CSPBGA connects directly to converters, transceivers, and memory devices. The two GTP transceivers can add compact high-speed data paths where required, although board-level signal integrity and connector requirements remain design constraints. Validate input timing, I/O voltage compatibility, and acquisition latency using the actual pin placement and clocking scheme generated for the target device.
推荐
PCI Interface Consolidation
The XC6SLX25T-3CSG324C includes one dedicated PCI block and substantial programmable logic, allowing legacy peripheral functions to be consolidated into a single FPGA-based interface design. The PCI block can handle protocol-specific transaction behavior while CLBs implement endpoint logic, registers, DMA control, and application-specific datapaths. Its 190 user I/Os also permit connection to storage, configuration logic, and external data sources. Designers should use AMD's supported PCI intellectual-property and implementation flow, review electrical and transaction-layer requirements, and confirm board-level PCI routing and signal-integrity compliance independently of FPGA timing closure.
推荐
推荐产品汇总
工程参考数据: XC6SLX25T-3CSG324C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC6SLX25T-3CSG324I | XC6SLX25T-3NCSG324C | XC6SLX25T-2CSG324I | XC6SLX25T-2CSG324C | XC6SLX25T-1LCSG324C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-CSPBGA, 15 mm x 15 mm | 324-CSPBGA - same | 324-CSPBGA - same | 324-CSPBGA - same | 324-CSPBGA - same | 324-CSPBGA - same |
| Logic Cells | 24,051 cells | 24,051 cells | 24,051 cells | 24,051 cells | 24,051 cells | 24,051 cells |
| User I/O | 190 I/Os | 190 I/Os | 190 I/Os | 190 I/Os | 190 I/Os | 190 I/Os |
| Speed Grade | -3 | -3 | -3N | -2 | -2 | -1L |
| Temperature Designation | C | I | C | I | C | C |
| Block RAM | 936 Kbit | 936 Kbit | 936 Kbit | 936 Kbit | 936 Kbit | 936 Kbit |
| DSP48A1 Slices | 38 slices | 38 slices | 38 slices | 38 slices | 38 slices | 38 slices |
| GTP Transceivers | 2 at up to 3.2 Gbps | 2 at up to 3.2 Gbps | 2 at up to 3.2 Gbps | 2 at up to 3.2 Gbps | 2 at up to 3.2 Gbps | 2 at up to 3.2 Gbps |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
关键差异点
- Highest listed -3 performance option among the compared Spartan-6 LXT variants (对比 XC6SLX25T-2CSG324I)
- Matches the -3 grade while offering an industrial temperature designation (对比 XC6SLX25T-3CSG324I)
- Integrated programmable resources avoid reliance on separate DSP and serial-interface devices (对比 XC6SLX25T-2CSG324C)
- High pin and resource density supports interface consolidation (对比 XC6SLX25T-1LCSG324C)
设计说明
Start the CSG324 layout with AMD's official ASCII package pinout file and confirm every ball against the selected schematic symbol and FPGA configuration. The package uses a 0.8 mm ball pitch in a 15 mm by 15 mm outline, so fanout and escape routing should be planned across the available board layers. Keep high-speed GTP pairs and sensitive clock or configuration paths away from noisy power-stage routes, and do not infer ball locations from a generic BGA drawing.
Partition the XC6SLX25T-3CSG324C supply network by functional rail and follow the manufacturer's recommended voltage, decoupling, and sequencing requirements. Place the required bulk and high-frequency decoupling capacitors close to their associated supply and ground balls, with short return paths and careful via distribution. Validate simultaneous resource use across CLBs, block RAM, DSP48A1 slices, I/O, and GTP transceivers because power demand and transient response depend on actual switching activity.
Estimate FPGA junction temperature from actual core, I/O, and transceiver utilization rather than nominal device frequency alone. The compact 324-CSPBGA concentrates heat into a small area, making copper spreading and via-array design important on multilayer boards. After implementation, rerun power analysis with realistic switching assumptions and obtain the device-specific thermal data from AMD. Reduce clock activity, enable unused resources, or improve board heat spreading if the calculated junction margin is insufficient.
Do not treat identical 324-CSPBGA packages as proof that every -3, -3N, -2, or -1L order code is an equivalent substitute. Speed-grade timing, temperature behavior, supported features, and device characterization may differ. Before replacing XC6SLX25T-3CSG324C, compare the exact order code, pinout, I/O standards, configuration requirements, power limits, timing margins, and lifecycle status. Rebuild and revalidate the implementation using the substitute device rather than reusing the original timing report.
合规信息
Exact-order-code compliance declarations are not stated in the listed component information. Confirm current environmental and automotive qualification documentation with AMD before making a compliance claim.