XC7A50T-L1FGG484I Artix-7 FPGA | AMD | Industrial Control
料号: XC7A50T-L1FGG484I ✓ 量产中XC7A50T-L1FGG484I 概述
An FPGA is a reconfigurable digital semiconductor. Unlike a fixed-function application-specific integrated circuit, an FPGA allows logic, interfaces, timing, and processing pipelines to be programmed after manufacture. The Artix-7 family occupies the lower-complexity portion of AMD's programmable-logic portfolio, combining substantial parallel-processing capability with relatively low system power. It can replace combinations of programmable logic, fixed-function controllers, and interface devices when a board benefits from field updates or product-family flexibility.
The XC7A50T-L1FGG484I is identified as an Artix-7 FPGA with 52,160 logic cells in distributor listings. Its low-power core voltage is reported as 0.95 V to 1.05 V, while the industrial suffix denotes operation across a -40 °C to 100 °C junction-temperature range. The FGG484 designation identifies the 484-ball package, and the second speed grade supports designs requiring predictable timing closure. Exact I/O counts, block-RAM capacity, DSP quantity, supported I/O standards, and absolute timing limits should be confirmed in the Artix-7 data sheet and the device-specific package files before schematic release.
The Artix-7 architecture supports parallel datapaths, programmable logic blocks, dedicated block RAM, digital signal processing resources, high-speed serial links, clock-management resources, and selectable I/O capabilities. This mix allows one FPGA to consolidate control logic, interface translation, data acquisition, packet processing, and acceleration functions. Configuration is normally loaded at startup, while the device's configurable I/O permits board-level adaptation when system interfaces change. Because FPGA designs depend on placement, routing, and tool configuration, timing performance must be evaluated with the intended Vivado design rather than inferred from the device name alone.
Typical applications include industrial automation controllers, communications infrastructure, medical-imaging interfaces, embedded video systems, and compact test equipment. In an industrial controller, programmable I/O can connect sensors, actuators, and field buses while parallel logic handles motion or sequencing. In communications equipment, the device can implement packet processing, clock recovery, and interface conversion. The -40 °C to 100 °C industrial temperature range and 484-ball package are particularly useful for compact control boards requiring moderate I/O density and industrial environmental tolerance.
Board design must follow the AMD FGG484 package drawing, including the exact ball map, thermal-via pattern, exposed-pad requirements, and recommended PCB stack-up. The -1FGG484I and -2FGG484I parts share the 484-ball mechanical package, but their speed grades affect timing performance; changing speed grade may require timing revalidation. Keep high-speed interfaces short, provide the specified supply rails and decoupling, and reserve the package's unused balls according to the manufacturer guidance. A bitstream is configuration-specific and must be regenerated or validated for every device, speed grade, and package change.
This product page combines the exact device identity, distributor availability information, same-package Artix-7 alternatives, package-specific design considerations, and an engineering selection guide. It also distinguishes confirmed electrical facts from parameters that require the AMD Artix-7 data sheet, package files, and the selected Vivado project for final design qualification.
直接替换替代料: XC7A50T-L1FGG484I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC7A50T-L1FGG484I (相同外形与封装尺寸) ——差异在于 Package, Logic Cells, Speed Grade, RoHS Status, Block RAM.
XC7A50T-1FGG484I
✅ 直接替换联系询价
查看数据手册 →XC7A50T-2FGG484C
✅ 直接替换联系询价
查看数据手册 →XC7A50T-2FGG484I
✅ 直接替换联系询价
查看数据手册 →XC7A50T-L1FGG484C
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC7A50T-L1FGG484I 最大额定值与电气特性
| Device Type | Artix-7 FPGA |
| Logic Cells | 52,160 cells |
| Core Supply Voltage | 0.95 V to 1.05 V |
| Junction Temperature Range | -40 °C to 100 °C |
| 封装 | 484-FBGA, 23 mm × 23 mm |
| 安装类型 | Surface Mount |
| Programmable Logic Type | Artix-7 FPGA |
| Speed Grade | -1 |
| Temperature Grade | Industrial |
| Number of Balls | 484 balls |
XC7A50T-L1FGG484I 484-fbga, 23 mm × 23 mm 引脚配置指南
XC7A50T-L1FGG484I(484-fbga, 23 mm × 23 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC7A50T-L1FGG484I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC7A50T-L1FGG484I 适用于 6 应用s: Industrial Automation Controller, Communications Infrastructure, Medical Imaging Interface, Embedded Video Processing, Test and Measurement Equipment, Data Acquisition and Signal Conditioning.
Industrial Automation Controller
The AMD XC7A50T-L1FGG484I fits compact industrial controllers because it combines 52,160 programmable logic cells with a -40 °C to 100 °C junction-temperature range in a 23 mm × 23 mm 484-FBGA package. Parallel logic can execute sequencing and motion-control functions while programmable I/O interfaces with sensors, actuators, and field-bus transceivers. Its L1 grade is appropriate where lower core power is valuable in continuously operating equipment. Design the board around the AMD FGG484 ball map, validate every I/O voltage and standard in Vivado, and complete thermal analysis using the actual switching activity, supply voltage, board construction, and ambient environment before production release.
推荐
Communications Infrastructure
The XC7A50T-L1FGG484I can implement packet handling, parallel-to-serial conversion, clock-related logic, and communication-protocol bridges in compact networking equipment. Its 52,160 logic cells provide capacity for parallel datapaths and control logic, while the low-power L1 grade can help constrain energy use in systems that remain active for long periods. External transceivers can provide the physical-layer interfaces, allowing the FPGA to concentrate digital processing and reduce discrete logic count. Exact serial transceiver resources, supported I/O standards, and maximum interface rates must be confirmed for the XC7A50T device, then constrained for pin placement, timing, and board-level signal integrity in the final Vivado project.
推荐
Medical Imaging Interface
The XC7A50T-L1FGG484I is suitable for the digital interface and control sections of medical-imaging equipment where programmable data paths and compact integration are valuable. Its 52,160 logic cells can support parallel data acquisition, preprocessing, image-format conversion, and control sequencing, while the 484-FBGA package provides a concentrated board footprint. The -40 °C to 100 °C junction-temperature range supports industrial-temperature product designs, although it does not by itself establish medical-system compliance. Engineers should partition acquisition from sensitive control functions, validate clocking and isolation architecture, and complete the applicable risk-management and electrical-safety review for the finished medical equipment.
推荐
Embedded Video Processing
The XC7A50T-L1FGG484I can consolidate video timing, pixel-stream processing, control logic, and interface conversion in embedded display or machine-vision equipment. Parallel programmable resources allow engineers to implement frame buffers, color-space conversion, overlay generation, or test-pattern generation without a separate fixed-function controller for every operation. The 484-FBGA package supports a dense PCB design, although its 484 balls demand careful escape routing and multilayer-board planning. Use the manufacturer package drawing and pinout files to assign I/O banks, then confirm that selected video interfaces meet the device's supported standards and timing constraints before freezing the Vivado implementation.
推荐
Test and Measurement Equipment
The XC7A50T-L1FGG484I fits programmable test systems requiring flexible sequencing, parallel data acquisition, pattern generation, and configurable I/O. Its 52,160 logic cells can combine control functions and data-path logic in one device, while the L1 speed grade can reduce power in benchtop or portable instruments. External converters and transceivers handle analog and high-speed physical functions, leaving the FPGA to manage digital acquisition, calibration tables, and instrument protocols. Because the specific X-ray and Artix-7 data sheets define the supported resources and absolute limits, engineers should verify pin capability, clocking architecture, acquisition timing, and thermal margins for each instrument configuration.
推荐
Data Acquisition and Signal Conditioning
The XC7A50T-L1FGG484I can act as the digital heart of a multi-channel acquisition system, coordinating parallel converters, applying filtering, and transferring captured data toward memory or communications logic. Programmable resources allow channel-specific pipelines to be combined with shared control and calibration functions, while the low-power L1 grade is useful in space- and power-constrained embedded systems. The device's 484-FBGA package provides many programmable I/O opportunities but requires disciplined bank planning and short routing from converters and clock sources. Confirm supported I/O standards, input threshold tolerances, clock-region access, and timing in the Artix-7 documentation and validate the completed design with Vivado timing analysis.
推荐
推荐产品汇总
工程参考数据: XC7A50T-L1FGG484I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC7A50T-1FGG484I | XC7A50T-2FGG484C | XC7A50T-2FGG484I | XC7A50T-L1FGG484C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 484-FBGA | 484-FBGA | 484-FBGA | 484-FBGA | 484-FBGA |
| Device Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Speed Grade | L1 low-power grade | -1 standard grade | -2 standard grade | -2 standard grade | L1 low-power grade |
| Temperature Grade | Industrial: -40 °C to 100 °C junction temperature | Industrial: -40 °C to 100 °C junction temperature | Commercial | Industrial: -40 °C to 100 °C junction temperature | Commercial |
| FPGA Design Tool | Vivado | Vivado | Vivado | Vivado | Vivado |
关键差异点
- Low-power L1 speed grade (对比 XC7A50T-1FGG484I)
- Industrial junction-temperature capability (对比 XC7A50T-2FGG484C)
- Same 484-FBGA mechanical package for controlled migration (对比 XC7A50T-2FGG484I)
设计说明
Use AMD's Artix-7 FGG484 package drawing and package-device pinout files as the controlling references for the PCB land pattern, ball assignments, power balls, and unused-ball treatment. Place all power and ground balls directly to the corresponding plane pins with minimal via stubs, and implement the manufacturer's recommended thermal-via arrangement beneath the package. A 484-ball BGA is mechanically sensitive to board construction, so verify copper balance, pad and mask dimensions, solder mask, component placement, and reflow profile against the released AMD package documentation.
Plan each supply rail with the exact XC7A50T and speed-grade power tables rather than a generic FPGA estimate. Decouple each applicable power ball or supply group at the package according to the manufacturer layout guidance, keep high-current paths short, and provide adequate plane area for transient current. When migrating from L1 to -1 or -2, compare Vivado power estimates and static versus dynamic power under the expected clocking and I/O utilization; the faster grade can alter both achievable performance and power behavior.
Assign high-speed interfaces through the Vivado design before fixing the PCB layer transitions, because Artix-7 I/O capabilities and timing are bank- and pin-dependent. Keep clock traces short and matched, provide controlled reference planes, minimize stubs and unnecessary vias, and follow device-specific input capacitance and output-loading rules. Validate each external transceiver, connector, memory interface, and converter against the published Artix-7 interface specifications before committing the schematic.
Do not treat the identical 484-ball footprint as proof that every ordering suffix is a transparent drop-in replacement. The L1, -1, and -2 designations affect speed and power characteristics, while I and C affect temperature grade. Rebase or regenerate the bitstream for the selected device, rerun synthesis and implementation, check timing closure and power, and verify configuration behavior. Also avoid changing XC7A50T to a different device density unless AMD's package migration documentation confirms identical ball functionality and the new bitstream meets the board's timing budget.
合规信息
The device is an industrial-temperature FPGA, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 is not applicable to this general-purpose industrial FPGA category.