XMC4104F64F128ABXQMA1 - 80MHz Cortex-M4 MCU | Infineon
料号： XMC4104F64F128ABXQMA1 ✗ 停产XMC4104F64F128ABXQMA1 概述
A microcontroller is a programmable system-on-chip that executes firmware, reads inputs, controls outputs, and manages communication interfaces. In the product hierarchy, this device belongs to the ARM Cortex-M4 microcontroller class, within embedded processors and integrated circuits. Its 80 MHz operating rate supports responsive control loops, while 128 KB of flash provides fixed on-chip program storage for firmware, configuration data, and boot code.
The XMC4104F64F128ABXQMA1 provides a 64-pin LQFP package with an exposed pad and a 1.3 V operating-supply value identified in the product listing. Its 128K x 8 flash organization provides 1,024,768 bits of programmable storage. The 32-bit architecture supports efficient handling of sensor data, digital control state machines, communications, and supervisory tasks without requiring an external processor.
The XMC4000 family architecture is designed for embedded control systems where deterministic peripheral access, compact packaging, and integration are important. The PG-LQFP-64-19 format offers accessible leads for conventional assembly and inspection, while the exposed thermal pad helps transfer heat from the device into the PCB copper plane. Exact peripheral assignments, memory-map details, clock limits, and electrical maximum ratings must be confirmed in the manufacturer datasheet before schematic or firmware sign-off.
Typical uses include industrial automation modules, motor-control peripherals, sensor-hub controllers, communications equipment, and embedded gateway functions. In each case, the device can collect digital or analog inputs, execute control algorithms, and coordinate communications through its integrated peripherals. An exposed-pad PCB design is essential because the package relies on effective heat conduction to maintain reliable operation under sustained processing load.
When laying out the PCB, reserve the exposed pad according to the manufacturer land-pattern and thermal-pad guidance, connect it to the appropriate ground reference, and place decoupling capacitors close to the power pins. Validate the external clock, reset, boot configuration, and unused-pin connections against the datasheet pin-description table. Firmware development should also account for the device identifier, flash programming procedure, and peripheral initialization sequence.
This product reference consolidates the confirmed core, memory, speed, package, and sourcing details with practical PCB guidance, pin-data limitations, and same-family drop-in options. For an exact schematic or firmware migration, verify package pinout, supply sequencing, peripheral equivalence, and lifecycle status against the current Infineon documentation.
直接替换替代料： XMC4104F64F128ABXQMA1 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： XMC4104F64F128ABXQMA1 （相同外形与封装尺寸） ——差异在于 Mounting Type, Package, Product Type, Embedded Flash Memory, Flash Organization.
XMC4100F64F128ABXQMA1
✅ 直接替换联系询价
查看数据手册 →XMC4101F64F128ABXQMA1
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
XMC4102F64F128ABXQMA1
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
XMC4103F64F128ABXQMA1
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
XMC4104F64F128BAXQMA1
✅ 直接替换联系询价
查看数据手册 →XMC4104F64F128ABXQMA1 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Series | XMC4000 |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Word Size | 32 bit |
| Embedded Flash Memory | 128 KB |
| Flash Organization | 128K x 8 bits |
| Embedded Flash Capacity | 1,024,768 bits |
| 工作电源电压 | 1.3 V |
| 封装 | PG-LQFP-64-19 |
| 引脚数量 | 64 pins |
| Package Type | LQFP with exposed pad |
| 安装类型 | Surface mount |
| Application Classification | Embedded microcontroller |
XMC4104F64F128ABXQMA1 lqfp with exposed pad 引脚配置指南
XMC4104F64F128ABXQMA1（lqfp with exposed pad 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： XMC4104F64F128ABXQMA1.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XMC4104F64F128ABXQMA1 适用于 6 应用s: Industrial Automation Controller, Motor-Control Peripheral, Industrial Sensor Hub, Communications Gateway Module, Condition Monitoring Controller, Robotics Control Module.
Industrial Automation Controller
The XMC4104F64F128ABXQMA1 fits an embedded industrial controller that must execute machine logic, evaluate sensor states, and coordinate communications in real time. Its ARM Cortex-M4 core operates at up to 80 MHz, while 128 KB of embedded flash provides room for application firmware and parameter tables. The 64-pin PG-LQFP-19 package is suitable for boards that need accessible package leads rather than a leadless land pattern. The exposed pad should be connected to the manufacturer-specified reference potential and backed by adequate copper. Before deployment, verify the required CAN, Ethernet, serial, analog, and digital interfaces against the exact XMC4104 peripheral configuration, and confirm the operating-temperature grade for the installation environment.
Motor-Control Peripheral
The XMC4104F64F128ABXQMA1 can serve as the supervisory controller in a stepper, BLDC, or servo-drive interface because its 80 MHz Cortex-M4 core can manage position, speed, and fault algorithms while external power devices perform the energy conversion. The 128 KB flash budget supports control code, lookup tables, and fault logging. Its 64-pin LQFP footprint provides access to digital control, timer, communication, and analog-assistance pins. The MCU is normally used beside power stages rather than replacing them, so power-conversion components still require appropriate voltage and current ratings. Verify timer channels, encoder interfaces, analog channels, and PWM routing in the manufacturer datasheet before assigning the device to a safety-critical motion-control path.
Industrial Sensor Hub
The XMC4104F64F128ABXQMA1 is appropriate for a multi-sensor node that gathers digital measurements, performs local filtering, and forwards processed data over a fieldbus or serial link. Its 80 MHz processing rate provides ample headroom for sampling loops, state estimation, diagnostics, and protocol handling, while the 128 KB on-chip flash stores firmware without an external program-memory device. Use the 64-pin package to distribute sensor inputs, communication signals, and status indicators across a conventional controller board. The 1.3 V supply designation requires a regulator network designed around the device's complete power requirements. Validate analog-channel availability, converter characteristics, communication peripherals, and sleep behavior in the Infineon documentation before final sensor accuracy claims are made.
Communications Gateway Module
The XMC4104F64F128ABXQMA1 can form the control core of an embedded communications gateway that translates between local serial interfaces and a higher-level network. The 80 MHz ARM Cortex-M4 core can maintain protocol state machines and process incoming frames, and 128 KB of flash provides a practical firmware platform for gateway software and security configuration. The PG-LQFP-64-19 package is convenient for equipment requiring a compact, leaded surface-mount design. Ethernet MAC requirements, external transceiver needs, protocol support, and precise peripheral multiplexing must be checked because the package alone does not guarantee a particular communications feature set. Validate timing, isolation, ESD, and grounding requirements at the physical interface layer.
Condition Monitoring Controller
The XMC4104F64F128ABXQMA1 is suitable for condition-monitoring equipment that samples vibration, temperature, or current sensors and executes local alarm logic. Its Cortex-M4 processor can perform filtering and feature extraction at 80 MHz, while 128 KB of flash can retain a bootloader, acquisition firmware, calibration constants, and event thresholds. The 64-pin LQFP package offers enough external connections for sensor conditioning, status communication, and digital outputs. For accurate monitoring results, match the selected analog inputs, reference behavior, and converter resolution to the signal chain rather than relying on the nominal CPU rate. Also review the device's stated operating-temperature range and watchdog or functional-safety support before deploying it in critical rotating machinery.
Robotics Control Module
The XMC4104F64F128ABXQMA1 can support a robotics controller that combines actuator commands, sensor fusion, and operator communications in a compact embedded platform. Its 80 MHz Cortex-M4 core handles real-time control tasks, and 128 KB of flash stores coordinated task software and configuration data. The 64-pin PG-LQFP-19 package is useful when a system requires manually accessible pins, a clear exposed-pad land pattern, and inspectable joints. Real-time performance must be assessed using the selected clock tree, interrupt configuration, and peripheral resources; CPU frequency alone does not determine deterministic latency. Verify that required timer outputs, encoder inputs, debug access, and communication channels are available on the exact package variant before beginning actuator integration.
工程参考数据： XMC4104F64F128ABXQMA1 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XMC4100F64F128ABXQMA1 | XMC4101F64F128ABXQMA1 | XMC4102F64F128ABXQMA1 | XMC4103F64F128ABXQMA1 | XMC4104F64F128BAXQMA1 |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-64-19 | PG-LQFP-64-19 | PG-LQFP-64-19 | PG-LQFP-64-19 | PG-LQFP-64-19 | PG-LQFP-64-19 |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Embedded Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Flash Organization | 128K x 8 bits | 128K x 8 bits | 128K x 8 bits | 128K x 8 bits | 128K x 8 bits | 128K x 8 bits |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Series | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 |
| Pin Count | 64 pins | 64 pins | 64 pins | 64 pins | 64 pins | 64 pins |
| Ordering Suffix Difference | ABXQMA1 | ABXQMA1; lower device number | ABXQMA1; lower device number | ABXQMA1; lower device number | ABXQMA1; lower device number | BAXQMA1; B ordering suffix |
关键差异点
- Exact XMC4104 family position （对比 XMC4100F64F128ABXQMA1)
- Closest ordering-suffix alternative （对比 XMC4104F64F128BAXQMA1)
- Consistent embedded footprint （对比 XMC4103F64F128ABXQMA1)
设计说明
Treat the exposed pad as a primary thermal and electrical land, not as optional package space. Follow the Infineon manufacturer datasheet land pattern and exposed-pad connection instructions, then provide uninterrupted copper beneath the device where the recommended pattern permits. Estimated thermal performance depends on board area, copper layers, airflow, and surrounding heat sources; calculate the junction rise from the actual dissipation and package thermal data before setting the operating limit.
Place the required input and bypass capacitors directly beside their associated power pins, with short current loops and a low-impedance ground return. Separate sensitive analog or communication routing from switching nodes and high-current motor or power-stage traces. Use the manufacturer pin-description table to confirm every power pin, decoupling value, exposed-pad connection, and unused-pin treatment before releasing the PCB artwork.
Do not approve a replacement based only on the 64-pin package and the 128 KB flash value. Compare reset, boot, clock, debug, communication, analog, timer, and interrupt assignments, as well as peripheral multiplexing, in the Infineon XMC4000 documentation. Firmware and startup code may also need revision when moving among XMC4100 through XMC4104 devices or between the A and B ordering suffixes.
合规信息
Compliance status is not stated in the product data and requires confirmation from the current Infineon material-declaration or qualification documents for the exact ordering suffix.