XMC7201SCQ024XABXUMA1 - Dual-Core M7 MCU | Infineon
料号： XMC7201SCQ024XABXUMA1 ✓ 量产中XMC7201SCQ024XABXUMA1 概述
An ARM microcontroller is a programmable semiconductor that integrates a processor core, memory interfaces, communication peripherals, timers, interrupt logic, and general-purpose I/O on one device. In the product hierarchy, the XMC7201SCQ024XABXUMA1 is a 32-bit microcontroller, an embedded-processing IC, and a member of the XMC family designed for industrial control, communications, networking, and connected equipment.
The family's defining feature is heterogeneous processing. The two Cortex-M7 cores can divide demanding control and communications workloads, while the Cortex-M0+ core provides an independent domain for peripheral control and security-related tasks. The embedded CAN FD interface supports higher-capacity, flexible automotive or industrial network communication, and Gigabit Ethernet provides high-bandwidth connectivity to a controller, switch, or network infrastructure.
The XMC7200 architecture combines those processors with embedded peripherals rather than relying only on external communication devices. CAN FD and Gigabit Ethernet are the clearest application-facing interfaces in the manufacturer datasheet. This makes the family appropriate for industrial gateways, networked controllers, adapter and charger platforms, and connected automation equipment that must combine real-time control with Ethernet communication.
Typical uses include industrial Ethernet gateways, CAN FD communication hubs, adapter and charger controllers, programmable automation equipment, and connected industrial sensors. The extended-longevity positioning makes the device especially relevant to industrial programs where supply continuity, PCB compatibility, and lifecycle management matter. Software support should be selected for the complete ordering code rather than only the abbreviated XMC7201SC-Q024X-AB designation.
Before schematic capture, confirm the exact lead configuration, exposed-pad requirements, pin multiplexing, and recommended decoupling from the Infineon package drawing and datasheet. Preserve the manufacturer's startup, clock, memory, and peripheral-instantiation requirements. Firmware configuration must account for all three CPU domains and should be validated for interrupt routing, Ethernet initialization, and CAN FD timing.
This page organizes the manufacturer specifications, sourcing guidance, application fit, and engineering cautions around the complete XMC7201SCQ024XABXUMA1 ordering code. It also distinguishes the product's industrial connectivity features from generic microcontroller capabilities and highlights the design checks needed before layout or firmware deployment.
直接替换替代料： XMC7201SCQ024XABXUMA1 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料XMC7201SCQ024XABXUMA1 最大额定值与电气特性
| Product Type | 32-bit industrial ARM microcontroller |
| Product Family | XMC7200 |
| Primary Processor Cores | 2 Arm Cortex-M7 cores |
| Auxiliary Processor Core | 1 Arm Cortex-M0+ core |
| Total Processor Cores | 3 cores |
| Processor Architecture | Arm Cortex-M7 and Arm Cortex-M0+ |
| Embedded CAN Interface | Controller Area Network with Flexible Data rate (CAN FD) |
| Embedded Ethernet Interface | Gigabit Ethernet |
| Target Application | Industrial applications |
| Product Longevity | Extended longevity |
| Halogen Status | Halogen free |
| RoHS 状态 | RoHS compliant |
XMC7201SCQ024XABXUMA1 standard 引脚配置指南
XMC7201SCQ024XABXUMA1（standard 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： XMC7201SCQ024XABXUMA1.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XMC7201SCQ024XABXUMA1 适用于 6 应用s: Industrial Ethernet Gateway, CAN FD Communication Hub, Adapter and Charger Controller, Connected Industrial Sensor Controller, Programmable Automation Controller, Industrial Network Security Node.
Industrial Ethernet Gateway
The XMC7201SCQ024XABXUMA1 fits an industrial Ethernet gateway that must manage high-speed network traffic while executing local control functions. According to the Infineon manufacturer datasheet, its Gigabit Ethernet interface provides the primary high-bandwidth connection, while the two Arm Cortex-M7 CPUs create additional processing capacity for protocol handling, diagnostics, and application logic. The auxiliary Cortex-M0+ core can handle peripheral or security-related tasks separately from the primary real-time workload. This separation helps avoid placing every communication and control task on one processor core. The design should define Ethernet PHY integration, clocking, reset, isolation, and connector requirements early, then validate throughput and protocol timing under the intended network load.
推荐
CAN FD Communication Hub
The XMC7201SCQ024XABXUMA1 is suitable for a CAN FD communication hub that must translate or coordinate traffic between industrial nodes and a higher-level network. According to the Infineon manufacturer datasheet, the device includes Controller Area Network with Flexible Data rate as an embedded peripheral, eliminating the need for a separate CAN controller when its other resources are sufficient. Two Cortex-M7 cores can support protocol conversion, diagnostics, and application processing concurrently, while the Cortex-M0+ core can service auxiliary control tasks. Engineering work should include bus timing validation, transceiver selection, termination review, fault handling, and firmware partitioning across processor domains to prevent communication deadlines from being affected by background work.
推荐
Adapter and Charger Controller
The XMC7201SCQ024XABXUMA1 aligns with adapter and charger control platforms that combine supervisory logic with external communications. Infineon specifically identifies adapters and chargers as target applications for the XMC7201SC-Q024X-AB configuration and describes the device as halogen free and RoHS compliant. The two Cortex-M7 CPUs can organize measurement, control, and communications, while the Cortex-M0+ core can isolate auxiliary peripheral work. The exact power-conversion topology remains application-specific, so the MCU must be evaluated for control-loop timing, external interface duties, fault handling, and safety requirements. Firmware partitioning and synchronized shutdown behavior should be tested across all three cores and every power state.
推荐
Connected Industrial Sensor Controller
The XMC7201SCQ024XABXUMA1 can serve as the control and communications processor in a connected industrial sensor system that must process local measurements and exchange data with an Ethernet network. According to the Infineon manufacturer datasheet, the XMC7200 family integrates CAN FD and Gigabit Ethernet while providing separate Cortex-M7 and Cortex-M0+ processing domains. The primary cores can execute measurement, filtering, and application logic, while the auxiliary core can handle a peripheral or security-related function. For sensor designs, analog front-end settling times and sensor timing must remain independent from network-processing jitter. Use the manufacturer timing definitions to allocate processor tasks, and verify that the physical package, pin multiplexing, and exposed thermal arrangement match the PCB design.
推荐
Programmable Automation Controller
The XMC7201SCQ024XABXUMA1 is well matched to programmable automation equipment that combines machine control with network management. According to the Infineon manufacturer datasheet, the three-core architecture provides two Arm Cortex-M7 processors for primary processing and an Arm Cortex-M0+ processor for peripheral and security processing. That division can separate deterministic I/O servicing from higher-level control and diagnostics. Gigabit Ethernet supports communication with supervisory systems, while CAN FD can connect the controller to industrial equipment networks. Before implementation, map each control loop to a defined processor and interrupt domain, document inter-core communication, and test worst-case latency during Ethernet and CAN traffic. This prevents communication activity from unexpectedly extending control-loop response times.
推荐
Industrial Network Security Node
The XMC7201SCQ024XABXUMA1 supports industrial network-security nodes that need both external data connectivity and an isolated domain for security-related processing. According to the Infineon manufacturer datasheet, the auxiliary Arm Cortex-M0+ core is intended for peripheral and security-processing tasks, while two Cortex-M7 cores handle primary application workloads. Gigabit Ethernet and CAN FD allow the node to participate in supervisory and fieldbus networks without relying on external protocol controllers. A secure implementation still requires a defined hardware root of trust, controlled boot and update procedures, protected memory and interfaces, and a clearly partitioned software architecture. Review the package pin assignments and security resources in the manufacturer documentation before finalizing board routing or assigning sensitive functions to a particular processor core.
推荐
工程参考数据： XMC7201SCQ024XABXUMA1 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Infineon Technologies |
| Product Family | XMC7200 |
| Primary Processor Cores | 2 Arm Cortex-M7 cores |
| Auxiliary Processor Core | 1 Arm Cortex-M0+ core |
| Total Processor Cores | 3 cores |
| CAN Support | Controller Area Network with Flexible Data rate (CAN FD) |
| Ethernet Support | Gigabit Ethernet |
| Product Longevity | Extended longevity |
| Environmental Compliance | RoHS compliant and halogen free |
关键差异点
- Three-core heterogeneous processing architecture （对比 Single-core industrial MCU)
- Integrated CAN FD and Gigabit Ethernet （对比 Industrial MCU requiring external protocol controllers)
- Industrial longevity positioning （对比 General-purpose short-life microcontroller)
设计说明
Design the power tree around the voltage ratings, decoupling, startup, and brownout behavior defined in the Infineon manufacturer datasheet for the exact orderable device. Place required input and output capacitors close to their associated supply pins, preserve the recommended return-path geometry, and account for the package thermal pad when it is electrically connected. Confirm regulator startup order and reset release behavior before enabling peripherals. The required supply rails, voltage tolerances, and capacitor values are not stated in the product summary and must be taken directly from the manufacturer datasheet.
Create separate board regions for the Cortex-M7 cores, Cortex-M0+ core, CAN FD interface, and Gigabit Ethernet interface after mapping the package pins. Keep high-speed Ethernet differential routes continuous, with the manufacturer-recommended spacing and reference-plane treatment, and route CAN FD transceiver connections away from noisy switching nodes. Follow the exact package drawing for exposed-pad connections and keep-out geometry because the target orderable code must be matched to the physical lead configuration before final routing.
Do not treat the shortened XMC7201SC-Q024X-AB designation as a complete procurement or layout identifier. Confirm the full XMC7201SCQ024XABXUMA1 ordering code, package, pin count, temperature grade, and shipping form against the Infineon ordering information. Software and bootloader projects should also use the exact device configuration rather than a generic XMC7200 target. Mismatched startup files, linker settings, pin definitions, or clock initialization can cause a board assembled with the right MCU number to remain nonfunctional.
Allocate deterministic control tasks away from communication stacks and operating-system activity. Two Cortex-M7 cores and one Cortex-M0+ core provide useful task isolation, but isolation depends on correct interrupt routing, peripheral ownership, and inter-core synchronization. Measure CAN FD timing and Ethernet traffic under worst-case background load, and verify that watchdog and fault-handling paths continue to operate if a processor or communication peripheral stalls. Keep timing budgets and interrupt priorities in the firmware design rather than relying only on core selection.
合规信息
Infineon identifies the XMC7201SC-Q024X-AB configuration as halogen free and RoHS compliant. REACH, AEC-Q100, lead-free, and conflict-minerals status were not stated.