Z8674312PSG - 8-Bit 12MHz OTP Microcontroller | Zilog
料号： Z8674312PSG ✓ 量产中Z8674312PSG 概述
A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, I/O ports, and peripherals on one device. The Z8674312PSG belongs to the Z8 microcontrollers family within the broader embedded-controller and semiconductor hierarchy. Its OTP program memory permits a finished device to be programmed once, making it suitable for cost-sensitive products that do not require in-circuit firmware updates.
The principal device characteristics include an 8 KB (8K x 8) OTP program-memory capacity, 236 x 8 bytes of RAM, and a maximum clock frequency of 12 MHz. The device provides 32 general-purpose I/O pins, a Z8 processor core, EBI/EMI connectivity, power-on reset, and a watchdog timer. These features provide a practical combination of control logic, data storage, and peripheral integration for embedded products.
The 12 MHz operating limit should be treated as the timing ceiling for the complete design, including clock tolerance, peripheral timing, and interrupt-service requirements. Its 8 KB OTP memory is suitable for compact control firmware, but memory utilization must be checked after including the startup code, drivers, interrupt routines, and application logic. The 236-byte RAM area also requires attention when buffering data or maintaining multiple task stacks.
Typical uses include appliance controllers, small industrial control modules, building equipment, instrumentation, simple human-interface panels, and embedded automation products. For a new design, engineers should confirm oscillator requirements, available I/O, memory consumption, timing margins, and interrupt behavior against the complete Zilog datasheet before committing the 40-pin footprint.
The main design consideration is that OTP memory cannot be erased and rewritten in the field. Firmware validation must therefore occur before final programming, while power, ground, and decoupling layout must follow the electrical requirements published for this device family.
This page consolidates verified distributor specifications, procurement details, package information, application guidance, and design cautions into a compact engineering reference that helps distinguish this Z8 microcontroller from broader embedded processor families.
直接替换替代料： Z8674312PSG ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料Z8674312PSG 最大额定值与电气特性
| Product Type | 8-bit Z8 Z86 microcontroller |
| Processor Core | Z8 core |
| Maximum Operating Frequency | 12 MHz |
| Program Memory Size | 8 KB (8K x 8) |
| Program Memory Type | One-Time Programmable (OTP) |
| RAM Size | 236 x 8 bytes |
| Number of General-Purpose I/O Pins | 32 pins |
| 封装 | 40-pin PDIP (0.620 in, 15.75 mm) |
| 电源电压 | 5 V |
| Oscillator Type | Internal |
| External Bus Connectivity | EBI/EMI |
| Power-On Reset | Included |
| Watchdog Timer | Included (WDT) |
| Architecture | CISC |
| Packaging | Tube |
| Datasheet Length | 84 pages |
Z8674312PSG 40-pin pdip (0.620 in, 15.75 mm) 引脚配置指南
Z8674312PSG（40-pin pdip (0.620 in, 15.75 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： Z8674312PSG.
请参阅 数据手册 以查看完整引脚配置。
典型应用
Z8674312PSG 适用于 6 应用s: Appliance Control, Industrial Automation Module, Building Equipment Controller, Instrumentation and Metering, Human-Interface Controller, Small Embedded Automation Controller.
Appliance Control
The Z8674312PSG fits compact appliance-control products that use a dedicated 8-bit controller to sequence heaters, motors, indicators, and user inputs. Its 32 general-purpose I/O pins provide substantial interface capacity, while the 8 KB OTP program-memory area can hold compact control firmware. The 236-byte RAM allowance is workable for straightforward state machines, although stack and buffer requirements must be measured. Because the program memory is one-time-programmable, appliance firmware should be fully validated before final programming. A 40-pin PDIP footprint is practical for serviceable industrial or commercial equipment where through-hole assembly and field replacement are useful.
Industrial Automation Module
The Z8674312PSG can serve as the local controller in a small industrial automation module that reads discrete sensors, controls outputs, and manages local diagnostics. Its Z8 core and 12 MHz maximum operating frequency are suitable for ordinary control tasks, while EBI/EMI connectivity can support expansion or external peripheral access. The watchdog timer is useful for recovering from unexpected program states, and power-on reset supports defined startup behavior. Designers should verify the operating-temperature grade, electrical isolation requirements, and industrial compliance because those details are not confirmed by the supplied listings.
Building Equipment Controller
The Z8674312PSG is applicable to small building-equipment controllers that combine room or equipment inputs with relays, displays, communication logic, and fault handling. Thirty-two I/O pins allow a substantial peripheral allocation without an external I/O expander, and the EBI/EMI interface provides a path to additional bus-connected devices. Firmware size should be checked against the fixed 8 KB OTP capacity, especially when adding communications protocols, diagnostics, and production-test routines. The 236 bytes of RAM also limits how many data buffers and stack frames can coexist, so application architecture should avoid unnecessary duplication.
Instrumentation and Metering
The Z8674312PSG is appropriate for simple metering and instrumentation products that need deterministic digital control rather than a high-performance application processor. Its 12 MHz Z8 core can manage sensor scanning, display updates, switch inputs, and data processing, and the EBI/EMI interface can connect the controller to external memory or peripheral devices. For precision analog measurement, an external ADC and carefully designed signal-conditioning circuitry may be needed. Firmware must be validated before OTP programming because no verified in-field rewrite capability is identified in the supplied data.
Human-Interface Controller
The Z8674312PSG can manage a compact keypad, LED display, and discrete controls in a dedicated human-interface subsystem. Thirty-two I/O pins provide enough parallel connections for switches, indicators, and display segments without requiring a large external bus. The 12 MHz operating ceiling supports ordinary scan and debounce routines, while the 236-byte RAM area is sufficient for modest display and input state tracking. For dense graphic displays, high-speed serial links, or USB connectivity, however, a newer MCU with more RAM and specialized peripherals would provide a more appropriate design path.
Small Embedded Automation Controller
The Z8674312PSG is suitable for standalone embedded controllers that perform sequencing, timing, local I/O, and simple data acquisition. Its watchdog timer supports recovery from abnormal execution, while EBI/EMI can extend the design with compatible external devices. The 8 KB OTP memory makes the device attractive for cost-sensitive products with a fixed, validated firmware set, but it creates a significant lifecycle constraint: a field failure cannot be corrected by simply rewriting program memory. Production planning should therefore include rigorous software validation, programming traceability, and an appropriate replacement strategy.
工程参考数据： Z8674312PSG ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Zilog |
| Package | 40-pin PDIP (0.620 in, 15.75 mm) |
| Product Type | 8-bit Z8 microcontroller |
| Maximum Operating Frequency | 12 MHz |
| Program Memory | 8 KB (8K x 8) OTP |
| RAM | 236 x 8 bytes |
| General-Purpose I/O | 32 pins |
| External Bus Connectivity | EBI/EMI |
| Supply Voltage | 5 V |
| Peripheral Highlights | Power-On Reset and Watchdog Timer |
关键差异点
- Fixed-cost OTP programming architecture （对比 Modern flash-based 8-bit microcontrollers)
- Substantial parallel I/O allocation （对比 Lower-pin-count 8-bit controllers)
- Established Z8 control platform （对比 ATMEGA328P-MUR)
设计说明
Do not treat OTP program memory as conventional flash. The verified capacity is 8 KB (8K x 8), and the device cannot be erased for a firmware correction after final programming. Freeze and validate the complete firmware image, including startup code, interrupt handlers, communication routines, and production-test functions, before programming production quantities. Maintain revision traceability between the released binary and each programmed device.
Confirm the complete power-supply requirements and operating limits in the exact Zilog datasheet before laying out the board. The supplied component data identifies a 5 V device and internal oscillator type but does not provide supply tolerance, current consumption, or absolute maximum ratings. Place required bypass capacitors close to the supply and ground pins, follow the manufacturer placement guidance, and test startup and brownout behavior across the full input range used by the product.
The 40-pin PDIP footprint is through-hole and occupies substantially more board area than a comparable surface-mount MCU. Confirm connector pitch, keep-out requirements, assembly access, and enclosure clearance before schematic capture. If the PCB already exists, verify every pin function against the manufacturer's 40-pin PDIP drawing; a matching 40-pin count alone does not prove electrical or mechanical interchangeability.
Route the external-bus EBI/EMI signals according to the manufacturer's guidance and the actual peripheral speed. Keep clocks away from sensitive analog inputs, provide a continuous ground reference, and isolate noisy switching or relay-drive nodes from external-bus traces. Because the supplied data does not include complete timing and pinout details, engineers must derive layout constraints from the exact PSG-package datasheet rather than generic Z8-family guidance.
合规信息
The supplied distributor and datasheet snippets do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. No compliance claim has been inferred from the manufacturer or package family.
