Z86C9116VEG - 16MHz ROMless 8-Bit MCU | Zilog
料号： Z86C9116VEG ✓ 量产中Z86C9116VEG 概述
As a ROMless microcontroller, the Z86C9116VEG requires an external program-memory device connected through its address and data buses. This architecture separates code storage from the controller and allows the program size to be selected during system design. The 16 MHz operating speed provides a practical balance between processing throughput, power consumption, and external-memory access time for cost-sensitive embedded control systems.
The listed electrical characteristics include a 4.5 V minimum operating supply and a 5.5 V maximum operating supply. An 8-bit external data bus supports connection to external program memory, while the 32 available I/O ports provide dedicated digital interfaces for sensors, switches, indicators, relays, and peripheral control signals. The device operates in the industrial temperature range, supporting industrial control and instrumentation environments.
Because the device is ROMless, the complete memory system depends on the external memory interface, address decoding, and firmware initialization sequence. Board designers should confirm the external bus timing and address map against the manufacturer datasheet before layout release. Decoupling, grounding, and unused-pin treatment are equally important for reliable operation in a through-hole industrial design.
Typical uses include industrial controllers, data-acquisition modules, keypad interfaces, motor-control sequencers, appliance controllers, and embedded instrumentation. The DIP-40 format also supports prototyping and legacy system maintenance where socketed parts and hand-wiring are common.
This page combines lifecycle information, verified distributor listings, pin-package details, application guidance, and engineering notes to support component selection and board-level planning for the Z86C9116VEG.
直接替换替代料： Z86C9116VEG ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： Z86C9116VEG （相同外形与封装尺寸） ——差异在于 Mounting Type, Pin Count, Program Memory.
该产品暂无直接替换替代料。
请求替代料Z86C9116VEG 最大额定值与电气特性
| Product Type | 8-bit ROMless microcontroller |
| Manufacturer | Zilog |
| Maximum Clock Speed | 16 MHz |
| 数据总线宽度 | 8 bit |
| I/O Port Count | 32 |
| Operating Supply Voltage Range | 4.5 V to 5.5 V |
| Program Memory | External memory required |
| Listed Package Type | DIP-40 |
| 引脚数量 | 40 pins |
| Operating Range | Industrial |
| Lifecycle Stage | Active |
| Technology | CMOS |
| CPU Architecture | 8-bit |
| 安装类型 | Through-hole |
Z86C9116VEG dip-40 引脚配置指南
Z86C9116VEG（dip-40 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： Z86C9116VEG.
请参阅 数据手册 以查看完整引脚配置。
典型应用
Z86C9116VEG 适用于 6 应用s: Industrial Programmable Control Module, Data-Acquisition Front End, Keypad and Menu Controller, Appliance Sequencing Controller, Embedded Instrumentation Controller, Legacy Control-System Maintenance.
Industrial Programmable Control Module
The Z86C9116VEG suits a compact industrial controller whose application code must remain scalable through external program memory. Its 16 MHz clock provides useful throughput for sequencing, state-machine control, and digital I/O scanning, while 32 ports allow the controller to operate relays, lamps, keypads, and sensors. The DIP-40 package also simplifies socketed prototypes and legacy maintenance boards. Because the device is ROMless, the design must reserve board area for external memory and confirm bus timing against the memory selected. The 4.5 V to 5.5 V supply range supports conventional 5 V industrial logic, provided grounding and bypass placement follow the manufacturer layout recommendations.
推荐
Data-Acquisition Front End
The Z86C9116VEG can coordinate a multiplexed data-acquisition system by sequencing analog switches, capturing sensor status, and transferring results through an external interface. Its 32 I/O ports provide ample digital control for range selection, channel enables, and front-panel indicators, while external program memory lets the manufacturer adjust the firmware set without changing the MCU. The 16 MHz clock is appropriate for supervisory rather than high-rate conversion work. Validate analog-interface timing, external-memory access cycles, and input levels before committing the board layout. Industrial-range listing supports instrument use, while the exact temperature envelope must be checked for the deployment environment.
推荐
Keypad and Menu Controller
The Z86C9116VEG is appropriate for a keypad, display, and rotary-menu controller where many inputs share a limited bus. Thirty-two ports can accommodate matrix rows and columns, indicator LEDs, and control signals without a complex serial expander, and the 16 MHz clock handles debouncing, scanning, and menu updates. Since the controller is ROMless, production firmware can be revised by changing the external memory device while retaining the same processor board. The DIP-40 format is especially useful for prototypes, educational platforms, and repair assemblies that use sockets. Confirm external-memory address decoding and define reset behavior before programming the firmware interface.
推荐
Appliance Sequencing Controller
The Z86C9116VEG can serve as the central sequencer in an appliance or commercial equipment controller using its 16 MHz clock for motor-step timing, valve control, timing sequences, and interlock monitoring. The 32-port arrangement reduces the need for additional logic when connecting discrete actuators and switches, while the 4.5 V to 5.5 V range aligns with a conventional 5 V control rail. External program memory separates application firmware from the controller and permits orderly capacity expansion. A robust design should use the manufacturer reset and oscillator recommendations, provide local bypass capacitance, and reserve unused pins according to the pin-description table.
推荐
Embedded Instrumentation Controller
The Z86C9116VEG can manage measurement instruments that combine front-panel controls, status indication, calibration tables, and service interfaces. Its external-memory architecture allows larger firmware images to be stored outside the MCU, and the 16 MHz clock supports menu logic, measurement sequencing, and communication routines. The DIP-40 package remains practical for modular instrument boards that use sockets or through-hole assembly. Designers should isolate analog circuitry from the digital bus, keep the 5 V supply distribution low-impedance, and verify address and data-bus timing with the chosen external memory. Confirm the precise pin multiplexing and interrupt assignments in the manufacturer documentation.
推荐
Legacy Control-System Maintenance
The Z86C9116VEG is useful for maintaining older industrial control boards that already use a DIP-40 Zilog controller and external program memory. Its through-hole package supports socket replacement, and the active lifecycle listing supports repair sourcing for equipment that must remain operational. The same 16 MHz, 8-bit, 32-port architecture allows a substitute decision to focus on exact pin function and external-memory behavior rather than introducing a different instruction set. Before replacement, compare the complete pin-description table, oscillator connection, reset configuration, and supply rails of the installed controller. Firmware should also be checked for undocumented peripheral dependencies before the board is returned to service.
推荐
推荐产品汇总
工程参考数据： Z86C9116VEG ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | DIP-40 |
| Brand | Zilog |
| Microcontroller Type | 8-bit ROMless microcontroller |
| Maximum Clock Speed | 16 MHz |
| Data Bus Width | 8 bit |
| I/O Port Count | 32 |
| Operating Supply Voltage Range | 4.5 V to 5.5 V |
| Program Memory Architecture | External memory required |
| Operating Range | Industrial |
| Lifecycle Stage | Active |
设计说明
Route the address and data buses away from sensitive analog inputs and keep the external program-memory interface as short as practical. Place bypass capacitors close to the controller supply pins and provide a low-impedance ground reference. Because the Z86C9116VEG is ROMless, confirm address decoding, memory-chip select behavior, and bus timing against the selected external memory before releasing the PCB layout.
Use the manufacturer pin-description table when assigning the 40 DIP pins because several port pins can support alternate peripheral functions. Do not leave connected board signals uncontrolled, and terminate unused inputs in a defined state. Verify the oscillator, reset, and power connections against the schematic before power-up so an incorrect pin assumption cannot damage external memory or control circuitry.
Do not assume that any 16 MHz 8-bit microcontroller is interchangeable with the Z86C9116VEG. A drop-in candidate must match the DIP-40 pin functions, external-memory interface, reset behavior, port multiplexing, and firmware expectations. Also avoid treating the listing's industrial range as a complete temperature specification; obtain the manufacturer operating-temperature limits before qualifying the assembly for a particular environment.
Plan the 5 V distribution around the stated 4.5 V to 5.5 V operating range and check the actual supply current against the controller and external-memory loads before selecting regulators and conductors. Provide local high-frequency bypass at the device and isolate switching regulators or motor drivers from sensitive logic. Power-on sequencing must remain consistent with the external memory and reset circuitry.
合规信息
The verified listings identify the part as active but do not provide RoHS, REACH, halogen-free, or conflict-minerals declarations. Use the manufacturer product documentation for compliance certificates.
