Reported by TechPowerUp on . Summarized and analyzed by XAIPART Editorial.
What happened
Kioxia and Dell have configured a single 42U server rack with 157 PB of raw flash storage.S1 The system runs Dell's software-defined ObjectScale object storage platform across 16 PowerEdge R7725xd servers and 640 Kioxia 245.76 TB LC9 Series SSDs.S1 Kioxia describes the installation as the industry's first single-rack object store at 157 PB, a designation based on its own market survey.S1
Each 2U server contains 40 E3.L drives.S1 The 16 servers occupy 32U, leaving 10U open within the rack.S1 Dell's George Papadopoulos says the configuration can place more data into fewer systems and racks while reducing cabling, power and cooling requirements.S1
The LC9 Series drives use PCIe 5.0 NVMe and Kioxia's eighth-generation BiCS FLASH QLC with a 32-die stack.S1 The 245.76 TB capacity is limited to the E3.L form factor; the 2.5-inch and E3.S versions reach 122.88 TB.S1 A rack using those smaller versions would hold about 78.6 PB.S1
| Metric | Reported value | Source |
|---|---|---|
| Rack capacity | 157 PB raw flash | S1 |
| Servers | 16 Dell PowerEdge R7725xd | S1 |
| SSDs | 640 Kioxia LC9 Series | S1 |
| Drive capacity | 245.76 TB E3.L | S1 |
| Interface | PCIe 5.0 NVMe | S1 |
| Production lead time | Not disclosed | S1 |
Background timeline
- May - Kioxia and Dell Technologies demonstrated a server configuration with 9.8 PB of flash storage.S1
XAIPART take
Technical impact
The architecture demonstrates that high-density QLC deployments can place substantial object capacity into a standard rack footprint, but engineers should validate endurance, latency and workload suitability for their specific data pattern. XAIPART analysis
The E3.L capacity advantage makes chassis selection and thermal design central to the deployment decision; alternative form factors require a different density calculation. XAIPART analysis
Market impact
Such density could reduce rack, cabling and cooling requirements for object-storage buyers, potentially changing capacity planning and refresh economics. XAIPART analysis
Procurement teams should request volume pricing, allocation policy and production lead times for the LC9 Series before treating the configuration as a deployable baseline. XAIPART analysis
Action
Engineers should compare 245.76 TB E3.L parts with 122.88 TB alternatives across chassis fit, power, cooling and serviceability requirements. XAIPART analysis
Buyers should request qualification results, endurance data, controller and firmware details, lead times and regional supply commitments for the Kioxia LC9 Series. XAIPART analysis
XAIPART Forecast
Within 9 months, XAIPART expects published lead times for Kioxia LC9 Series SSDs to remain at or below 12 weeks for initial volume allocations; if a supplier quotes more than 12 weeks during that period, this forecast is wrong. XAIPART analysis
Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. The industry-first designation relies on a vendor survey, while availability, pricing, qualification status and production lead times are unconfirmed.
Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.
البدائل ودورة الحياة
| القطعة | العلاقة | دورة الحياة | الأساس |
|---|---|---|---|
| — | لا يوجد بديل مسجَّل بحاجة إلى بيانات | — | يتطلب match_type قبل أن يظهر أي تسمية سلف |
تأتي تسميات «السلف» و«البديل» فقط من نوع تطابق مسجَّل، أو حالة دورة حياة، أو نص المصدر. وحيث لا يُسجَّل تطابق، لا تُعرض أي تسمية. قوائمنا ليست مرجعًا للسوق.
ما يجب مراقبته
| ادعاء | الحد الأدنى | بواسطة | الحالة |
|---|---|---|---|
| Within 9 months, XAIPART expects published lead times for Kioxia LC9 Series SSDs to remain at or below 12 weeks for initial volume allocations | a supplier quotes more than 12 weeks during that period | within 9 months | Pending |
التوقعات التي تتبين خطؤها تبقى ظاهرة وموسومة. لا نحذفها.
المشهد التنافسي
- 25908 قوائم نشطة في هذه الفئة على XAIPART
- 113 الشركات المصنّعة الممثَّلة
- 60 الشركات المصنّعة المذكورة في أرشيف أخبارنا خلال آخر 30 يومًا
تعكس الأعداد كتالوج XAIPART فقط — وهي ليست حصة سوقية.
الأجزاء المتأثرة
لا يوجد تطابق في الكتالوج. لا يرتبط هذا الخبر بأي قطعة مدرجة حاليًا على XAIPART. نحن لا نستنتج مطابقات، ولا نعرض قائمة عناصر نائبة.
ضغط التكلفة حسب البُعد
| Dimension | FRED series ID | Unit | Lag | As of |
|---|---|---|---|---|
| Input cost | PCOPPUSDM, PALUMUSDM, PNICKUSDM | USD/mt | 52 d | |
| Supply/demand | PCU334413334413, IPG3344S | index(1982=100) / index(2017=100) | 46 d | |
| FX & energy | DEXCHUS, DCOILBRENTEU, DHHNGSP | rate / USD/bbl / USD/MMBtu | 5 d |
No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.
كيف أُنتج هذا
أدلة العملية — الجلب، وسلامة المصدر، والنموذج، والبوابة
| Source fetched | TechPowerUp · www.techpowerup.com · 1,972 chars · fetch status success |
|---|---|
| Source sanity (S1) | ok — passed before any model call (no s1_ block recorded) |
| Model / prompt | MiniMax-M3.1-Flash · prompt Blog Agent - News Summary (v2.8-final) · 7,761 tokens · 23.1s · run completed |
| Gate | verdict pass · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.069767 · C10 rounds 0 |
| Time contract | 1 <time datetime> values in this brief — 0 violations (+08:00 or date-only) |
كل صف أعلاه ينتجه خط المعالجة، وليس مكتوبًا يدويًا.
التعليقات
كن أول من يعلّق.
🔐 يرجى تسجيل الدخول لنشر تعليق.
ليس لديك حساب؟ إنشاء حساب