Reported by TechPowerUp on . Summarized and analyzed by XAIPART Editorial.
What happened
Kioxia and Dell have configured a single 42U server rack with 157 PB of raw flash storage.S1 The system runs Dell's software-defined ObjectScale object storage platform across 16 PowerEdge R7725xd servers and 640 Kioxia 245.76 TB LC9 Series SSDs.S1 Kioxia describes the installation as the industry's first single-rack object store at 157 PB, a designation based on its own market survey.S1
Each 2U server contains 40 E3.L drives.S1 The 16 servers occupy 32U, leaving 10U open within the rack.S1 Dell's George Papadopoulos says the configuration can place more data into fewer systems and racks while reducing cabling, power and cooling requirements.S1
The LC9 Series drives use PCIe 5.0 NVMe and Kioxia's eighth-generation BiCS FLASH QLC with a 32-die stack.S1 The 245.76 TB capacity is limited to the E3.L form factor; the 2.5-inch and E3.S versions reach 122.88 TB.S1 A rack using those smaller versions would hold about 78.6 PB.S1
| Metric | Reported value | Source |
|---|---|---|
| Rack capacity | 157 PB raw flash | S1 |
| Servers | 16 Dell PowerEdge R7725xd | S1 |
| SSDs | 640 Kioxia LC9 Series | S1 |
| Drive capacity | 245.76 TB E3.L | S1 |
| Interface | PCIe 5.0 NVMe | S1 |
| Production lead time | Not disclosed | S1 |
Background timeline
- May - Kioxia and Dell Technologies demonstrated a server configuration with 9.8 PB of flash storage.S1
XAIPART take
Technical impact
The architecture demonstrates that high-density QLC deployments can place substantial object capacity into a standard rack footprint, but engineers should validate endurance, latency and workload suitability for their specific data pattern. XAIPART analysis
The E3.L capacity advantage makes chassis selection and thermal design central to the deployment decision; alternative form factors require a different density calculation. XAIPART analysis
Market impact
Such density could reduce rack, cabling and cooling requirements for object-storage buyers, potentially changing capacity planning and refresh economics. XAIPART analysis
Procurement teams should request volume pricing, allocation policy and production lead times for the LC9 Series before treating the configuration as a deployable baseline. XAIPART analysis
Action
Engineers should compare 245.76 TB E3.L parts with 122.88 TB alternatives across chassis fit, power, cooling and serviceability requirements. XAIPART analysis
Buyers should request qualification results, endurance data, controller and firmware details, lead times and regional supply commitments for the Kioxia LC9 Series. XAIPART analysis
XAIPART Forecast
Within 9 months, XAIPART expects published lead times for Kioxia LC9 Series SSDs to remain at or below 12 weeks for initial volume allocations; if a supplier quotes more than 12 weeks during that period, this forecast is wrong. XAIPART analysis
Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. The industry-first designation relies on a vendor survey, while availability, pricing, qualification status and production lead times are unconfirmed.
Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.
대체품 및 수명 주기
| 부품 | 관계 | 수명 주기 | 근거 |
|---|---|---|---|
| — | 등록된 대체품 없음 데이터 필요 | — | 요구 사항 match_type 어떤 전임자 라벨이 표시되기 전에 |
"전임자" 및 "대체품" 라벨은 기록된 일치 유형, 수명 주기 상태 또는 출처 텍스트에서만 부여됩니다. 일치가 기록되지 않은 경우 라벨이 표시되지 않습니다. 당사 자체 등록 상품은 시장 기준이 아닙니다.
주시할 사항
| 주장 | 임계값 | 작성: | 상태 |
|---|---|---|---|
| Within 9 months, XAIPART expects published lead times for Kioxia LC9 Series SSDs to remain at or below 12 weeks for initial volume allocations | a supplier quotes more than 12 weeks during that period | within 9 months | Pending |
잘못된 예측도 계속 표시하고 표시를 남깁니다. 삭제하지 않습니다.
경쟁 구도
- 25908 XAIPART의 이 카테고리 활성 등록 상품
- 113 등록된 제조사
- 60 최근 30일간 뉴스 아카이브에 언급된 제조사
수치는 XAIPART 카탈로그만 반영하며 시장 점유율이 아닙니다.
영향받는 부품
카탈로그 일치 없음. 이 보도는 현재 XAIPART에 등록된 어떤 부품과도 매핑되지 않습니다. 일치를 추론하지 않으며 자리 표시자 목록도 표시하지 않습니다.
차원별 비용 압력
| Dimension | FRED series ID | Unit | Lag | As of |
|---|---|---|---|---|
| Input cost | PCOPPUSDM, PALUMUSDM, PNICKUSDM | USD/mt | 52 d | |
| Supply/demand | PCU334413334413, IPG3344S | index(1982=100) / index(2017=100) | 46 d | |
| FX & energy | DEXCHUS, DCOILBRENTEU, DHHNGSP | rate / USD/bbl / USD/MMBtu | 5 d |
No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.
이 콘텐츠의 제작 방식
프로세스 증거 — 수집, 출처 온전성, 모델 및 게이트
| Source fetched | TechPowerUp · www.techpowerup.com · 1,972 chars · fetch status success |
|---|---|
| Source sanity (S1) | ok — passed before any model call (no s1_ block recorded) |
| Model / prompt | MiniMax-M3.1-Flash · prompt Blog Agent - News Summary (v2.8-final) · 7,761 tokens · 23.1s · run completed |
| Gate | verdict pass · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.069767 · C10 rounds 0 |
| Time contract | 1 <time datetime> values in this brief — 0 violations (+08:00 or date-only) |
위의 모든 행은 파이프라인에서 생성되며 수작업으로 작성되지 않습니다.
댓글
첫 번째 댓글을 남겨 보십시오.
🔐 먼저 로그인 댓글을 게시하려면
계정이 없으십니까? 회원가입