AD974BRS vs AD974BRSZ مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ AD974BRS بواسطة Analog Devices و AD974BRSZ بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | AD974BRS | AD974BRSZ |
|---|---|---|
| العلامة التجارية | Analog Devices | Analog Devices |
| الفئة | ADC/DAC | ADC/DAC |
| حالة دورة الحياة | نشط | نشط |
| Number of Analog Input Channels | 4 channels | 4 channels |
| ADC Resolution | 16 bits | — |
| Sampling Throughput | 200 kSPS | — |
| Input Multiplexer | 4-channel single-ended input multiplexer | — |
| Supported Analog Input Ranges | 0 V to +4 V, 0 V to +5 V, or ±10 V | — |
| جهد التغذية | +5 V | 5 V |
| Internal Reference Voltage | +2.5 V | 2.5 V |
| Reference Selection | Internal or external 2.5 V reference | — |
| Maximum Power Dissipation | 120 mW | — |
| Power-Down Mode | Supported | Yes |
| Conversion Architecture | Successive-approximation switched-capacitor ADC | — |
| Digital Interface | High-speed serial interface | Serial interface |
| On-Chip Clock | Supported | — |
| العلبة | 28-SSOP | 28-pin SSOP |
| نوع التركيب | Surface mount | Surface mount |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Analog Input Type | Single-ended | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Product Type | — | 4-channel data-acquisition ADC |
| الدقة | — | 16 bit |
| Maximum Sampling Rate | — | 200 ksps |
| Converter Architecture | — | Successive-approximation switched-capacitor ADC |
| Input Range 1 | — | 0 V to 4 V |
| Input Range 2 | — | 0 V to 5 V |
| Input Range 3 | — | -10 V to +10 V |
| Analog Input Multiplexer | — | 4-channel internal multiplexer |
| Power Supply Count | — | 1 |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Digital Input Logic Levels | — | [DATA_NEEDED: digital input logic levels] |
| Analog Input Input Impedance | — | [DATA_NEEDED: analog input impedance] |
| Total Unadjusted Error | — | [DATA_NEEDED: total unadjusted error] |
| Integral Nonlinearity | — | [DATA_NEEDED: integral nonlinearity] |
| Differential Nonlinearity | — | [DATA_NEEDED: differential nonlinearity] |
| Signal-to-Noise Ratio | — | [DATA_NEEDED: signal-to-noise ratio] |
| ENOB | — | [DATA_NEEDED: effective number of bits] |
| Typical Power Dissipation | — | [DATA_NEEDED: typical power dissipation] |
| Power-Down Current | — | [DATA_NEEDED: power-down current] |