AD974BRS vs AD974BRSZ तुलना
विस्तृत दोनों ओर की तुलना AD974BRS द्वारा Analog Devices और AD974BRSZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | AD974BRS | AD974BRSZ |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Number of Analog Input Channels | 4 channels | 4 channels |
| ADC Resolution | 16 bits | — |
| Sampling Throughput | 200 kSPS | — |
| Input Multiplexer | 4-channel single-ended input multiplexer | — |
| Supported Analog Input Ranges | 0 V to +4 V, 0 V to +5 V, or ±10 V | — |
| सप्लाई वोल्टेज | +5 V | 5 V |
| Internal Reference Voltage | +2.5 V | 2.5 V |
| Reference Selection | Internal or external 2.5 V reference | — |
| Maximum Power Dissipation | 120 mW | — |
| Power-Down Mode | Supported | Yes |
| Conversion Architecture | Successive-approximation switched-capacitor ADC | — |
| Digital Interface | High-speed serial interface | Serial interface |
| On-Chip Clock | Supported | — |
| पैकेज | 28-SSOP | 28-pin SSOP |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Analog Input Type | Single-ended | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Product Type | — | 4-channel data-acquisition ADC |
| रेज़ोल्यूशन | — | 16 bit |
| Maximum Sampling Rate | — | 200 ksps |
| Converter Architecture | — | Successive-approximation switched-capacitor ADC |
| Input Range 1 | — | 0 V to 4 V |
| Input Range 2 | — | 0 V to 5 V |
| Input Range 3 | — | -10 V to +10 V |
| Analog Input Multiplexer | — | 4-channel internal multiplexer |
| Power Supply Count | — | 1 |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Digital Input Logic Levels | — | [DATA_NEEDED: digital input logic levels] |
| Analog Input Input Impedance | — | [DATA_NEEDED: analog input impedance] |
| Total Unadjusted Error | — | [DATA_NEEDED: total unadjusted error] |
| Integral Nonlinearity | — | [DATA_NEEDED: integral nonlinearity] |
| Differential Nonlinearity | — | [DATA_NEEDED: differential nonlinearity] |
| Signal-to-Noise Ratio | — | [DATA_NEEDED: signal-to-noise ratio] |
| ENOB | — | [DATA_NEEDED: effective number of bits] |
| Typical Power Dissipation | — | [DATA_NEEDED: typical power dissipation] |
| Power-Down Current | — | [DATA_NEEDED: power-down current] |