ADM207ARZ vs ADM207AR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ADM207ARZ بواسطة Analog Devices و ADM207AR بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | ADM207ARZ | ADM207AR |
|---|---|---|
| العلامة التجارية | Analog Devices | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-232 transceiver | RS-232 transceiver |
| Number of Drivers | 5 | — |
| Number of Receivers | 3 | — |
| جهد التغذية | 4.5 V to 5.5 V | +5 V |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 200 kbps | — |
| Charge-Pump Capacitor | 0.1 µF | — |
| Protocol | RS-232 | — |
| Compliance Interface | EIA-232-E and V.28 | — |
| Onboard Voltage Converter | Yes, DC-to-DC converter | — |
| Output Swing | ±9 V | 9 V |
| العلبة | 24-pin SOIC W | 24-pin SOIC |
| نوع التركيب | Surface Mount | Surface mount |
| Packaging | Tube | — |
| عدد الدبابيس | 24 | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Driver Count | — | 5 |
| Receiver Count | — | 3 |
| معدل البيانات | — | 200 kb/s |
| Charge-Pump Capacitor Value | — | 0.1 µF |
| Low Power | — | 15 mW |
| Receiver Input Level | — | 30 V |
| Interface Standard | — | EIA-232-E and V.28 |
| Power-Supply Requirement | — | Single +5 V |
| Transceiver Configuration | — | 5 transmitters and 3 receivers |
| Shutdown Feature | — | Low-power shutdown |
| Latch-Up Protection | — | Latch-up free |
| Compatibility | — | Plug-in upgrade for MAX205-211/213 |
| تيار التغذية | — | [DATA_NEEDED: supply current] |
| Driver Output Voltage | — | [DATA_NEEDED: minimum and maximum driver output voltage] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |