ADM207ARZ vs ADM207AR Karşılaştırma
Ayrıntılı yan yana karşılaştırma ADM207ARZ tarafından Analog Devices ve ADM207AR tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | ADM207ARZ | ADM207AR |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | RS-232 transceiver | RS-232 transceiver |
| Number of Drivers | 5 | — |
| Number of Receivers | 3 | — |
| Besleme Gerilimi | 4.5 V to 5.5 V | +5 V |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 200 kbps | — |
| Charge-Pump Capacitor | 0.1 µF | — |
| Protocol | RS-232 | — |
| Compliance Interface | EIA-232-E and V.28 | — |
| Onboard Voltage Converter | Yes, DC-to-DC converter | — |
| Output Swing | ±9 V | 9 V |
| Paket | 24-pin SOIC W | 24-pin SOIC |
| Montaj Türü | Surface Mount | Surface mount |
| Packaging | Tube | — |
| Pin Sayısı | 24 | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Driver Count | — | 5 |
| Receiver Count | — | 3 |
| Veri Hızı | — | 200 kb/s |
| Charge-Pump Capacitor Value | — | 0.1 µF |
| Low Power | — | 15 mW |
| Receiver Input Level | — | 30 V |
| Interface Standard | — | EIA-232-E and V.28 |
| Power-Supply Requirement | — | Single +5 V |
| Transceiver Configuration | — | 5 transmitters and 3 receivers |
| Shutdown Feature | — | Low-power shutdown |
| Latch-Up Protection | — | Latch-up free |
| Compatibility | — | Plug-in upgrade for MAX205-211/213 |
| Besleme Akımı | — | [DATA_NEEDED: supply current] |
| Driver Output Voltage | — | [DATA_NEEDED: minimum and maximum driver output voltage] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |