ADM232LJR vs ADM232LAR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ADM232LJR بواسطة Analog Devices و ADM232LAR بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | ADM232LJR | ADM232LAR |
|---|---|---|
| العلامة التجارية | Analog Devices | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| Product Type | RS-232 line-driver and receiver transceiver | — |
| جهد التغذية | 5 V | 5 V (single supply) |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| Maximum Data Rate | 120 kbps | — |
| Driver Output Swing | ±9 V | — |
| Charge-Pump Capacitor Value | 1 µF | — |
| Receiver Input Voltage Rating | 30 V | — |
| Power Supply Configuration | Single 5 V supply | — |
| DC-DC Converter | Onboard | — |
| Shutdown Feature | Low-power shutdown; receivers active in shutdown | — |
| Interface Standard | EIA-232-E and V.28 | — |
| Logic Technology | CMOS | — |
| العلبة | 16-pin SOIC | 16-lead SOIC (SOIC-16) |
| نوع التركيب | Surface mount | Surface Mount |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status for ADM232LAR] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status for ADM232LAR] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Transceiver Configuration | — | 2 drivers / 2 receivers (2/2) |
| معدل البيانات | — | 120 kB/s |
| Interface Standard Compliance | — | EIA-232-E and V.28 |
| Output Swing | — | 9 V with 5 V supply |
| On-Board DC-DC Converters | — | Yes |
| Required External Capacitors | — | 1 uF |
| Shutdown | — | Low power shutdown mode |
| Receiver Supply Current in Shutdown | — | 1 uA (receivers active in shutdown) |
| Receiver Input Voltage Tolerance | — | 30 V |
| عدد الدبابيس | — | 16 |
| Technology | — | CMOS |
| Automotive Qualification (AEC-Q100) | — | not_applicable |
| تيار التغذية | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |