ADM232LJR vs ADM232LAR So sánh

So sánh chi tiết song song của ADM232LJR bằng Analog Devices và ADM232LAR bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
ADM232LJR ADM232LJR - 5V 120kbps RS-232 Transceiver | Analog Devices

ADM232LJR - 5V 120kbps RS-232 Transceiver | Analog Devices

ADM232LJR ✓ Hoạt động
Analog Devices
ADM232LAR ADM232LAR - 5V 2/2 RS-232 Transceiver, 120kB/s | Analog Devices

ADM232LAR - 5V 2/2 RS-232 Transceiver, 120kB/s | Analog Devices

ADM232LAR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số ADM232LJR ADM232LAR
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type RS-232 line-driver and receiver transceiver —
Điện áp cung cấp 5 V 5 V (single supply)
Number of Drivers 2 —
Number of Receivers 2 —
Maximum Data Rate 120 kbps —
Driver Output Swing ±9 V —
Charge-Pump Capacitor Value 1 µF —
Receiver Input Voltage Rating 30 V —
Power Supply Configuration Single 5 V supply —
DC-DC Converter Onboard —
Shutdown Feature Low-power shutdown; receivers active in shutdown —
Interface Standard EIA-232-E and V.28 —
Logic Technology CMOS —
Hộp 16-pin SOIC 16-lead SOIC (SOIC-16)
Kiểu lắp đặt Surface mount Surface Mount
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status for ADM232LAR]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status for ADM232LAR]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Transceiver Configuration — 2 drivers / 2 receivers (2/2)
Tốc độ dữ liệu — 120 kB/s
Interface Standard Compliance — EIA-232-E and V.28
Output Swing — 9 V with 5 V supply
On-Board DC-DC Converters — Yes
Required External Capacitors — 1 uF
Shutdown — Low power shutdown mode
Receiver Supply Current in Shutdown — 1 uA (receivers active in shutdown)
Receiver Input Voltage Tolerance — 30 V
Số lượng chân — 16
Technology — CMOS
Automotive Qualification (AEC-Q100) — not_applicable
Điện áp cung cấp — [DATA_NEEDED: typical and maximum supply current]
Driver Output Current — [DATA_NEEDED: driver output current]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá