ATSAM4S8CA-CU vs ATSAM4S8CA-CUR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ATSAM4S8CA-CU بواسطة Microchip Technology و ATSAM4S8CA-CUR بواسطة Microchip Technology. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Microchip Technology
ATSAM4S8CA-CU - ARM Cortex-M4 MCU 120MHz 512KB Flash | Microchip
ATSAM4S8CA-CU ✓ نشطMicrochip Technology
ATSAM4S8CA-CUR - ARM Cortex-M4 MCU 120MHz 512KB Flash | Microchip
ATSAM4S8CA-CUR ✓ نشطمقارنة المواصفات
| المعامل | ATSAM4S8CA-CU | ATSAM4S8CA-CUR |
|---|---|---|
| العلامة التجارية | Microchip Technology | Microchip Technology |
| الفئة | Microcontrollers | Microcontrollers |
| حالة دورة الحياة | نشط | نشط |
| Core Architecture | ARM Cortex-M4 | ARMv7-M |
| Core Width | 32-bit | — |
| Maximum Clock Speed | 120 MHz | 120 MHz |
| Program Memory (Flash) | 512 KB (512K x 8) | 512 KB |
| SRAM | 128 KB | 128 KB |
| Instruction Cache | 2 KB | — |
| DSP Extensions | Yes (single-cycle MAC, hardware multiply) | — |
| Memory Protection Unit (MPU) | Yes | — |
| Instruction Set | Thumb-2, ARM Cortex-M4 | — |
| Supply Voltage (Vcc/Vdd) | 1.62 V to 3.6 V | — |
| درجة حرارة التشغيل | -40 C to +85 C (Industrial) | -40C to +85C (Industrial) |
| العلبة | 100-pin TFBGA (9x9 mm) | 100-TFBGA (9x9 mm) |
| External Bus Interface (EBI) | 16-bit (SDRAM/SRAM/NAND/NOR) | — |
| USB | USB 2.0 Full-Speed, on-chip transceiver | USB 2.0 Full-Speed with on-chip transceiver |
| CAN | CAN 2.0A/B | Up to 2 CAN 2.0B controllers |
| ADC | 12-bit | 10-bit ADC |
| Active Current | Approx. 30 mA at 100 MHz (per datasheet) | — |
| Back-up Mode Current (RTC, 1.8 V) | 3 uA | — |
| Pin-to-Pin Compatibility | SAM4S, SAM4N, SAM3S, SAM3N, SAM7S (64-/100-pin) | — |
| نوع التركيب | Surface Mount | Surface Mount |
| مستوى MSL | [DATA_NEEDED: MSL Level] | [DATA_NEEDED: MSL rating] |
| حالة RoHS | Compliant (per Heisener listing) | Compliant |
| Core | — | ARM Cortex-M4 with FPU |
| Supply Voltage (VDDIO) | — | 1.62 V to 3.6 V |
| DMA Channels | — | 12 |
| External Bus Interface | — | Yes (EBI) |
| Active Power (typ) | — | 30 mA at 100 MHz |
| Back-up Mode Current | — | 3 uA at 1.8 V (RTC running) |
| AES Hardware Accelerator | — | Not present on S8 variant |
| Series | — | SAM4S (pin-to-pin with SAM4N/SAM3S/SAM3N/SAM7S) |