ATSAM4S8CA-CU vs ATSAM4S8CA-CUR 비교
다음의 상세 나란히 비교: ATSAM4S8CA-CU 제조: Microchip Technology 및 ATSAM4S8CA-CUR 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATSAM4S8CA-CU - ARM Cortex-M4 MCU 120MHz 512KB Flash | Microchip
ATSAM4S8CA-CU ✓ 활성Microchip Technology
ATSAM4S8CA-CUR - ARM Cortex-M4 MCU 120MHz 512KB Flash | Microchip
ATSAM4S8CA-CUR ✓ 활성사양 비교
| 파라미터 | ATSAM4S8CA-CU | ATSAM4S8CA-CUR |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $6.18 | $5.05 |
| Core Architecture | ARM Cortex-M4 | ARMv7-M |
| Core Width | 32-bit | — |
| Maximum Clock Speed | 120 MHz | 120 MHz |
| Program Memory (Flash) | 512 KB (512K x 8) | 512 KB |
| SRAM | 128 KB | 128 KB |
| Instruction Cache | 2 KB | — |
| DSP Extensions | Yes (single-cycle MAC, hardware multiply) | — |
| Memory Protection Unit (MPU) | Yes | — |
| Instruction Set | Thumb-2, ARM Cortex-M4 | — |
| Supply Voltage (Vcc/Vdd) | 1.62 V to 3.6 V | — |
| 동작 온도 | -40 C to +85 C (Industrial) | -40C to +85C (Industrial) |
| 패키지 | 100-pin TFBGA (9x9 mm) | 100-TFBGA (9x9 mm) |
| External Bus Interface (EBI) | 16-bit (SDRAM/SRAM/NAND/NOR) | — |
| USB | USB 2.0 Full-Speed, on-chip transceiver | USB 2.0 Full-Speed with on-chip transceiver |
| CAN | CAN 2.0A/B | Up to 2 CAN 2.0B controllers |
| ADC | 12-bit | 10-bit ADC |
| Active Current | Approx. 30 mA at 100 MHz (per datasheet) | — |
| Back-up Mode Current (RTC, 1.8 V) | 3 uA | — |
| Pin-to-Pin Compatibility | SAM4S, SAM4N, SAM3S, SAM3N, SAM7S (64-/100-pin) | — |
| 실장 유형 | Surface Mount | Surface Mount |
| MSL 레벨 | [DATA_NEEDED: MSL Level] | [DATA_NEEDED: MSL rating] |
| RoHS 상태 | Compliant (per Heisener listing) | Compliant |
| Core | — | ARM Cortex-M4 with FPU |
| Supply Voltage (VDDIO) | — | 1.62 V to 3.6 V |
| DMA Channels | — | 12 |
| External Bus Interface | — | Yes (EBI) |
| Active Power (typ) | — | 30 mA at 100 MHz |
| Back-up Mode Current | — | 3 uA at 1.8 V (RTC running) |
| AES Hardware Accelerator | — | Not present on S8 variant |
| Series | — | SAM4S (pin-to-pin with SAM4N/SAM3S/SAM3N/SAM7S) |