ATSAMHA1G16A-XPRO vs ATSAM4S-XSTK مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ATSAMHA1G16A-XPRO بواسطة Microchip Technology و ATSAM4S-XSTK بواسطة Microchip Technology. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Microchip Technology
ATSAMHA1G16A-XPRO - SAM HA1G16A Xplained Pro MCU Eval Kit | Microchip
ATSAMHA1G16A-XPRO ✓ نشطMicrochip Technology
ATSAM4S-XSTK - SAM4S Xplained Pro ARM Cortex-M4 Starter Kit | Microchip
ATSAM4S-XSTK ✓ نشطمقارنة المواصفات
| المعامل | ATSAMHA1G16A-XPRO | ATSAM4S-XSTK |
|---|---|---|
| العلامة التجارية | Microchip Technology | Microchip Technology |
| الفئة | Development Boards | Development Boards |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Xplained Pro Evaluation Kit | Starter Kit (Evaluation Kit + Extension Boards) |
| Target MCU | ATSAMHA1G16A (SAM HA1G16A SiP) | — |
| Core Architecture | ARM Cortex-M0+ 32-bit | — |
| Target MCU Family | SAM HA1 (SiP, System-in-Package) | — |
| On-board Debugger | EDBG (AT32UC3A3256-based) | EDBG (Embedded Debugger) over USB |
| Debug Interface | Cortex-M0+ SWD via EDBG | — |
| Power Supply | USB-powered (EDBG USB) | — |
| Host Interface | USB Micro-B (EDBG) | — |
| Extension Headers | Xplained Pro EXT1/EXT2/EXT3; Arduino Uno R3-compatible | — |
| User I/O | LEDs, user buttons, reset button | — |
| Bootloader | Mass-storage drag-and-drop (target MCU) | — |
| Supported Extensions | I/O1 Xplained Pro, OLED1 Xplained Pro, QT2/QT4 Xplained Pro, PROTO1 Xplained Pro | — |
| Supported IDEs | Microchip Studio (Atmel Studio), MPLAB X IDE, ASF / Harmony | Microchip Studio, Atmel Studio, GCC ARM toolchain |
| Form Factor | Xplained Pro evaluation board | — |
| نوع التركيب | Desktop / Bench (Arduino-shield-compatible) | — |
| حالة RoHS | Compliant | Compliant |
| On-board MCU | — | ATSAM4SD32C |
| Core | — | ARM Cortex-M4 with FPU and DSP extensions |
| Maximum CPU Frequency | — | 120 MHz |
| Flash Memory | — | 2048 KB (2 MB) |
| SRAM | — | 160 KB |
| Low-frequency Crystal | — | 32.768 kHz (0.032768 MHz) |
| Operating Voltage Range (MCU) | — | 1.62 V to 3.6 V |
| USB | — | USB 2.0 Full-Speed Device/Host with on-chip PHY |
| ADC | — | 12-bit, up to 8 channels (per SAM4S family) |
| Communication Peripherals | — | USART x3, UART x2, TWI (I2C) x2, SPI x2, I2S x2, HS USB |
| External Bus Interface | — | Yes (EBI), plus 16-bit SMC (Static Memory Controller) |
| Included Extension Boards | — | I/O1 Xplained Pro, OLED1 Xplained Pro, PROTO1 Xplained Pro |
| Included Cables | — | 2x USB cables |
| Software Framework | — | Atmel Software Framework (ASF) / Harmony |