BTG70013A1ESWXUMA2 vs BTG7003A1EPWXUMA2 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ BTG70013A1ESWXUMA2 بواسطة Infineon و BTG7003A1EPWXUMA2 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ نشطمقارنة المواصفات
| المعامل | BTG70013A1ESWXUMA2 | BTG7003A1EPWXUMA2 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Power MOSFET Drivers |
| حالة دورة الحياة | نشط | نشط |
| Product Family | PROFET Wire Guard 12V | — |
| Part Number | BTG70013A-1ESW (tape & reel: BTG70013A1ESWXUMA2) | — |
| الوظيفة | Single-channel high-side power switch / smart power switch | — |
| Switch Topology | High-side, 1:1 | — |
| Output Transistor | N-Channel power MOSFET | — |
| Maximum Load Current | 26.6 A | — |
| Nominal Supply Voltage | 12 V (automotive) | — |
| Operating Voltage Range | [DATA_NEEDED: VBB min/max] | 6 V to 18 V |
| On-State Resistance RDS(on) | [DATA_NEEDED: typ RDS(on) in mΩ] | — |
| Logic Input | Active High | — |
| Idle / Key-off Current | < 60 µA (active supply in key-off mode); 50 µA per Infineon product page | — |
| Wire Protection | Selectable integrated I²t function | Integrated I²t |
| Wake Feature | IDL pin for microcontroller wake-up | — |
| Embedded Protection | Over-current, over-voltage, over-temperature, reverse battery, loss of ground, short circuit | — |
| Functional Safety | ISO 26262-compliant | ISO 26262 compliant |
| عدد المخارج | 1 | — |
| العلبة | PG-TSDSO-24-32 (TSDSO-EP-24, exposed pad) | PG-TSDSO-14-22 (exposed pad) |
| نوع التركيب | Surface Mount | Surface Mount |
| درجة حرارة التشغيل | [DATA_NEEDED: Tj / TA range] | -40C to +150C (TJ) |
| حالة RoHS | RoHS Compliant (per Newark listing) | Compliant |
| Diagnostic Output | Status / current-sense feedback pin | — |
| Application Domain | Automotive 12 V body electronics, industrial 12 V/24 V power distribution | — |
| Switch Type | — | High-Side Power Switch |
| Number of Channels | — | 1 |
| Configuration | — | 1:1 N-Channel |
| Maximum Continuous Load Current | — | 15.7 A |
| Load Dump Tolerance | — | 40 V |
| Idle Mode Quiescent Current | — | 50 µA |
| On-Resistance R_DS(on) | — | 10 mΩ (typ) |
| Control Input | — | Active High |