BTS52004EKAXUMA1 vs BTS52001ENAXUMA1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ BTS52004EKAXUMA1 بواسطة Infineon و BTS52001ENAXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | BTS52004EKAXUMA1 | BTS52001ENAXUMA1 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Power MOSFET Drivers |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Quad Smart High-Side Power Switch | Smart High-Side Power Switch |
| البنية الطوبولوجية | High-Side, 1:1 N-Channel MOSFET with charge pump | — |
| Number of Channels | 4 | 1 |
| On-Resistance (Ron, typ) | 200 mΩ per channel | — |
| Continuous Load Current per Channel | 800 mA | — |
| Operating Voltage Range (Vbb) | 5 V to 38 V | — |
| Load Dump Tolerance | Up to 38 V | — |
| Standby Current | [DATA_NEEDED: typical Ibb(off)] | — |
| Quiescent Current (active) | [DATA_NEEDED: Ibb(on) typ] | — |
| PWM Frequency (max) | 1 kHz | — |
| Protection Features | Short-circuit, overload, overtemperature, overvoltage, open-load detection | — |
| Diagnostic Output | IS pin (proportional load current sense) | Yes (status feedback) |
| نطاق درجة حرارة التشغيل | -40 °C to +150 °C junction | -40 °C to +150 °C |
| العلبة | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) | PG-TDSO-8-31 (Exposed Pad) |
| نوع التركيب | Surface Mount | Surface Mount |
| Technology | Infineon Smart6 | Smart6 (N-channel vertical MOSFET with charge pump) |
| مستوى MSL | 3 (per JEDEC J-STD-020) | — |
| حالة RoHS | Compliant | — |
| Family | — | Classic PROFET 12V |
| On-State Resistance (RDS(on)) | — | 200 mΩ (typical) |
| Continuous Load Current | — | 1.5 A |
| Nominal Operating Voltage | — | 12 V |
| Operating Voltage Range | — | 4.5 V to 28 V (load-dump tolerant) |
| Input Control | — | Logic-level, active-high |
| Open-Load Detection | — | Yes (in OFF state) |
| Current Limitation | — | Yes (integrated) |
| Over-Temperature Protection | — | Yes (with auto-restart) |
| Over-Voltage Protection | — | Yes (load-dump robust) |
| Automotive Qualification | — | AEC-Q100 qualified |
| Target Load | — | 1× R10W 12V lamp, LEDs |