BTS70021EPPXUMA1 vs BTT60302ERAXUMA1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ BTS70021EPPXUMA1 بواسطة Infineon و BTT60302ERAXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ نشطمقارنة المواصفات
| المعامل | BTS70021EPPXUMA1 | BTT60302ERAXUMA1 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Power MOSFET Drivers |
| حالة دورة الحياة | نشط | نشط |
| Product Family | PROFET+2 12V | — |
| البنية الطوبولوجية | Smart High-Side Switch, N-Channel MOSFET | — |
| Maximum Continuous Load Current | 21 A | — |
| On-State Resistance (RDS(on)) | 2.6 mOhm typical | — |
| Operating Supply Voltage (Vbb) | 6 V to 18 V | 8 V to 36 V |
| Transient Supply Voltage | 28 V (load dump tolerant) | — |
| Standby Current | [DATA_NEEDED: typical uA value] | [DATA_NEEDED: standby current] |
| Current Sense Output (IS) | Analog proportional load current | — |
| Fault Output (DEN/IN) | Yes, latched | — |
| Reverse Polarity Protection | Yes (ReverSave) | — |
| Overload Protection | Yes (current limit) | — |
| Short-Circuit Protection | Yes (latched) | — |
| Over-Temperature Protection | Yes (thermal shutdown with restart) | — |
| Over-Voltage Protection (Vbb clamp) | Yes | — |
| Load Dump Clamp Voltage | 41 V typical | — |
| Open-Load Detection | Yes (on-state and off-state) | — |
| PWM Capability | Yes, up to [DATA_NEEDED: max PWM frequency] | — |
| نطاق درجة حرارة التشغيل | -40 C to +150 C junction | — |
| العلبة | PG-TSDSO-14-22 (exposed pad) | PG-TDSO-14-31 (14-pin, exposed pad) |
| نوع التركيب | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 automotive qualified | — |
| حالة RoHS | Compliant (Green Product) | Compliant |
| Product Type | — | Dual-channel Smart High-Side Power Switch |
| Family | — | PROFET+ 24V |
| Number of Channels | — | 2 |
| On-State Resistance (typ, per channel, 25°C) | — | 32 mΩ |
| Continuous Load Current (per channel) | — | 4 A |
| Load-Dump Tolerance | — | 42 V |
| Switch Type | — | 1:1 N-Channel high-side |
| Process Technology | — | Smart6 (vertical N-MOSFET + charge pump) |
| Diagnostic Output | — | Current sense (IS pin) |
| Protection Features | — | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection |
| Automotive Qualification | — | AEC-Q100 |
| درجة حرارة التشغيل | — | -40 °C to +150 °C junction |