BTS712204ESEXUMA1 vs BTS70402EPGXUMA1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ BTS712204ESEXUMA1 بواسطة Infineon و BTS70402EPGXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | BTS712204ESEXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Power MOSFET Drivers |
| حالة دورة الحياة | نشط | نشط |
| Number of Channels | 4 | 4 |
| عدد المخارج | 4 | — |
| تكوين الخرج | High-side | High-side, N-channel MOSFET |
| Nominal Continuous Current per Channel | 5 A | — |
| Typical On-State Resistance per Channel (Rdson) | 30 mOhm | — |
| جهد التغذية التشغيلي | 5 V to 28 V (load-dump tolerant) | — |
| Maximum Load-Dump Voltage | 40 V (per datasheet) | — |
| Quiescent Current (Standby) | [DATA_NEEDED: standby Iq typical] | — |
| SPI / Diagnostic Interface Frequency | 5 MHz | — |
| نوع الواجهة | Serial (SPI-compatible) + status pins | — |
| Diagnostic Functions | Current limit, over-temperature, open-load, short-to-battery/ground | — |
| نطاق درجة حرارة التشغيل | -40 C to +150 C (junction) | -40 °C to +150 °C junction |
| العلبة | PG-TSDSO-24 EP (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Package Dimensions | [DATA_NEEDED: PG-TSDSO-24 EP body size] | — |
| نوع التركيب | Surface Mount | Surface Mount |
| مستوى MSL | MSL 3 (per JEDEC J-STD-020) | — |
| Automotive Qualification | AEC-Q100 Grade 1 capable | — |
| Reverse-Battery Protection | Yes (integrated) | — |
| RoHS / Lead-Free | Yes / Yes (PG-TSDSO EP package) | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| الوظيفة | — | Smart High-Side Power Switch |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |