BTS712204ESEXUMA1 vs BTS70402EPGXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS712204ESEXUMA1 disebabkan oleh Infineon dan BTS70402EPGXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Infineon
BTS712204ESEXUMA1 - 4-Channel 5A Smart High-Side Switch | Infineon
BTS712204ESEXUMA1 ✓ AktifPengandingan Spesifikasi
| Parametr | BTS712204ESEXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Channels | 4 | 4 |
| Bilangan Output | 4 | — |
| Konfigurasi Output | High-side | High-side, N-channel MOSFET |
| Nominal Continuous Current per Channel | 5 A | — |
| Typical On-State Resistance per Channel (Rdson) | 30 mOhm | — |
| Tegangan Pemberi Arus Operasi | 5 V to 28 V (load-dump tolerant) | — |
| Maximum Load-Dump Voltage | 40 V (per datasheet) | — |
| Quiescent Current (Standby) | [DATA_NEEDED: standby Iq typical] | — |
| SPI / Diagnostic Interface Frequency | 5 MHz | — |
| Jenis Antaramuka | Serial (SPI-compatible) + status pins | — |
| Diagnostic Functions | Current limit, over-temperature, open-load, short-to-battery/ground | — |
| Gambaran Suhu Operasi | -40 C to +150 C (junction) | -40 °C to +150 °C junction |
| Kemasan | PG-TSDSO-24 EP (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Package Dimensions | [DATA_NEEDED: PG-TSDSO-24 EP body size] | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Aras MSL | MSL 3 (per JEDEC J-STD-020) | — |
| Automotive Qualification | AEC-Q100 Grade 1 capable | — |
| Reverse-Battery Protection | Yes (integrated) | — |
| RoHS / Lead-Free | Yes / Yes (PG-TSDSO EP package) | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fungsi | — | Smart High-Side Power Switch |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |