EP1SGX25FF1020C5L vs EP1SGX25FF1020 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ EP1SGX25FF1020C5L بواسطة Altera و EP1SGX25FF1020 بواسطة Altera. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | EP1SGX25FF1020C5L | EP1SGX25FF1020 |
|---|---|---|
| العلامة التجارية | Altera | Altera |
| الفئة | FPGA & CPLD | FPGA & CPLD |
| حالة دورة الحياة | Obsolete | Obsolete |
| Family | Stratix GX | Stratix GX |
| Logic Elements | 25,660 cells | — |
| Process Technology | 130 nm CMOS | 130 nm CMOS |
| Package Type | FC-FBGA (Flip-Chip Fine-pitch Ball Grid Array) | — |
| عدد الأطراف | 1020 balls | — |
| Core Voltage | 1.5 V | — |
| Speed Grade | C5 (slowest tier) | — |
| Maximum Transceiver Data Rate | 3.125 Gbps | — |
| Maximum Operating Frequency | 5000 MHz (internal reference) | — |
| نوع التركيب | Surface Mount | Surface Mount (BGA) |
| درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | -40C to +85C (industrial variant) / 0C to +85C (commercial variant) |
| Memory Architecture | TriMatrix (M512/M4K/M-RAM blocks) | — |
| I/O Standards Supported | LVDS, LVTTL, LVCMOS, HSTL, SSTL | — |
| Configuration Scheme | Active serial (EPCS), passive serial, JTAG | — |
| DSP Blocks | [DATA_NEEDED: DSP block count] | Embedded dedicated multipliers |
| حالة RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS compliance status] |
| Logic Elements (LE) | — | 25,660 |
| Configurable Logic Blocks (CLB) | — | 2,566 |
| Embedded Memory (bits) | — | 1,944,576 |
| Logic Cells (per FPGAkey) | — | 25,660 |
| Combinatorial Delay (Tpd) | — | 7.49 ns (per Microchip USA datasheet summary) |
| Operating Frequency (max) | — | [DATA_NEEDED: max internal operating frequency] |
| العلبة | — | 1020-ball FCBGA (PBGA, 1.00 mm pitch) |
| Pin/Package Count | — | 1020 |
| جهد التغذية | — | [DATA_NEEDED: core VCC voltage] |
| Serial Transceivers | — | Embedded SERDES (multi-gigabit, protocol-dependent) |
| PLL / Clock Management | — | Embedded PLLs |
| Configuration Method | — | SRAM-based, configuration via JTAG / passive serial / fast passive parallel |